Mechanical Intercrop Seeder DRILLBOX / MECHANICBOX
2.60-3.00 m / 3.00 m
In recent years Europe crop farming has increasingly and extensively relied on stubble inversion machinery such as cultivators, rotary harrows etc.
Continuing such rationalisation measures while at the same time preventing the soil from silting up, eroding and compacting as well as keeping the cost for fallow area farming as low as possible, will make the use of intercrop seeders indispensable for working the soil in a minimal way.
The DRILLBOX or MECHANICBOX you can seed 5 kg/ha of any intercrop and / or seed mix in a simple oversowing procedure. By using a knob for ifine and a lever for coarse settings you can adjust the seeding rate. The SEEDBOX features an activation wheel system with baffle plates and can also be equipped with a stirring shaft for an extra charge.
The specially shaped distribution deflector plates spread the seeds evenly. The system is activated by a separate large bottom drive wheel with metal drive cassette. High gusset plates inside the tank keep the seeds from slipping and ensure exact seed distribution even on sloped terrain.
The MECHANICBOX should come into operation by slowly working machines (subsoiler, rotary harrow,...) with a shallow mounting position respectively falling height. You should chose the DROLLBOX on the other hand on machines with high working speed (cultivator, disc harrow, ...) and from approx. 70 cm mounting height.
Mechanical seeding box for attachment on different machines from 2.60 m - 3.00 m working width
- Primarily for initial sowing
- Intercrop seeding
- All seed types as well as granulated dung
- Calibration plate
- Exact metering through the shearing wheel system
- Special shaped distribution deflector plates
- Adjustable mounting consoles
- Bottom drive wheel with two long actuation metal drive cassettes