TINES & SWEEPS | EINBÖCK

TINES & SWEEPS

  • Many equipment options
  • Highest durability
  • Best working quality
  • Sophisticated detail solutions
  • Precisely fitting sweeps & tines
  • Precise cut and safe soil penetration

TINES & SWEEPS

TINES & SWEEPS

  • Many equipment options
  • Highest durability
  • Best working quality
  • Sophisticated detail solutions
  • Precisely fitting sweeps & tines
  • Precise cut and safe soil penetration

Standard vibro-tines with duckfoot sweeps
The angle of pressure of the sweeps, which can be mounted with a handle on the vibro-tines, enable the machine to cut the full surface between the rows in a shallow working depth, which is important for effective weed control. According to the row distance, crop and consistency of the soil the vibro-tines with 32 x 12 mm / 1.2" x 0.5" can be equipped with duckfoot sweeps in the widths of 80 up to 300 mm / 3.1" up to 11.8". Slotted grooves on all holders ensure easy adjustment of height position and working depth. The duckfoot sweeps are mounted with screws to the holders, which ensure a secure mounting, but nevertheless they can be changed quickly.

Standard vibro-tines with duckfoot sweeps
The angle of pressure of the sweeps, which can be mounted with a handle on the vibro-tines, enable the machine to cut the full surface between the rows in a shallow working depth, which is important for effective weed control. According to the row distance, crop and consistency of the soil the vibro-tines with 32 x 12 mm / 1.2" x 0.5" can be equipped with duckfoot sweeps in the widths of 80 up to 300 mm / 3.1" up to 11.8". Slotted grooves on all holders ensure easy adjustment of height position and working depth. The duckfoot sweeps are mounted with screws to the holders, which ensure a secure mounting, but nevertheless they can be changed quickly.

Einböck-special-vibro-tines with duckfoot sweeps

Mainly in encrusted and hard soils or in stony surfaces, the Einböck special vibro-tines ensure safe entry, high stability as well as consistent precision. Duckfoot sweeps for the 40 x 12 mm / 1.6" x 0.5" vibrotines are available from 80 mm to 300 mm / 3.15" up to 11.8" width to meet different row spacings, crop and soil conditions. Slotted grooves on all holders ensure easy adjustment of height position and working depth. The extremely wear-resistant duckfoot sweeps are mounted with a single bolt, what ensures a safe fixing, but they still can be replaced quickly. The Einböck special vibro-tines are recommended by Einböck and are mainly mounted on most CHOPSTARs ex factory.

Einböck-special-vibro-tines with duckfoot sweeps

Mainly in encrusted and hard soils or in stony surfaces, the Einböck special vibro-tines ensure safe entry, high stability as well as consistent precision. Duckfoot sweeps for the 40 x 12 mm / 1.6" x 0.5" vibrotines are available from 80 mm to 300 mm / 3.15" up to 11.8" width to meet different row spacings, crop and soil conditions. Slotted grooves on all holders ensure easy adjustment of height position and working depth. The extremely wear-resistant duckfoot sweeps are mounted with a single bolt, what ensures a safe fixing, but they still can be replaced quickly. The Einböck special vibro-tines are recommended by Einböck and are mainly mounted on most CHOPSTARs ex factory.

Einböck-special-ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps with lowest possible earth movement are available as an additional option. They can be mounted with the vibro spring 32 x 12 mm / 1.2" x 0.5" as well as  40 x 12 mm / 1.6" x 0.5". Like all Einböck holders, they also have slatted grooves for easy adjustment of the working depth. This special-ultraflat duckfoot sweep is specially recommended for row-crop cultivators working in narrow row spacing, e.g. grain.

Einböck-special-ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps with lowest possible earth movement are available as an additional option. They can be mounted with the vibro spring 32 x 12 mm / 1.2" x 0.5" as well as  40 x 12 mm / 1.6" x 0.5". Like all Einböck holders, they also have slatted grooves for easy adjustment of the working depth. This special-ultraflat duckfoot sweep is specially recommended for row-crop cultivators working in narrow row spacing, e.g. grain.

S-tines with duckfoot sweeps

For deeper work there are S-tines with 100 mm / 3.94" or 180 mm / 7.09" duckfoot sweeps instead of the standard vibro-tines.

S-tines with duckfoot sweeps

For deeper work there are S-tines with 100 mm / 3.94" or 180 mm / 7.09" duckfoot sweeps instead of the standard vibro-tines.

Carbide metal duckfoot sweeps for S-tine, vibro-tine 32 x 12 mm / 1.2" x 0.5" and vibro-tine 40 x 12 mm / 1.6" x 0.5".

The screwed coupling is the same as for the standard sweeps. During processing the carbide tips or carbide plates are soldered to the special base bodies of the sweeps and then coated. The sweeps are 100 % compatible and adapted to all Einböck tines & holders - no tolerances and compromises in fitting accuracy.

 

Carbide metal sweeps offer the following advantages: 

  • Service life is significantly increased - especially in soil conditions with above-average wear
  • Time saving due to not having to change sweeps
  • Sweeps stay in their usual shape longer, thereby an exact cut and a good feed even in dry soil is achieved
  • Less traction is required due to sharp sweep tips, and the sweeps are also self-sharpening thanks to the beaver tooth effect
  • Especially recommended for contractors or big farms.

Carbide metal duckfoot sweeps for S-tine, vibro-tine 32 x 12 mm / 1.2" x 0.5" and vibro-tine 40 x 12 mm / 1.6" x 0.5".

The screwed coupling is the same as for the standard sweeps. During processing the carbide tips or carbide plates are soldered to the special base bodies of the sweeps and then coated. The sweeps are 100 % compatible and adapted to all Einböck tines & holders - no tolerances and compromises in fitting accuracy.

 

Carbide metal sweeps offer the following advantages: 

  • Service life is significantly increased - especially in soil conditions with above-average wear
  • Time saving due to not having to change sweeps
  • Sweeps stay in their usual shape longer, thereby an exact cut and a good feed even in dry soil is achieved
  • Less traction is required due to sharp sweep tips, and the sweeps are also self-sharpening thanks to the beaver tooth effect
  • Especially recommended for contractors or big farms.

Angle knives for vibro-tines

Straight (1) or offset angle (2) knives are available on request. They are cutting the soil near the plant row and guide the earth flow away from the row. They cut weeds near the row, but minimise the risk of burying. The unworked hoeing-strip can be cleaned by accessories such as finger weeders or rotative weeder elements. Angle knives can be mounted on Einböck-special-vibro-tines with duckfoot sweeps (40 x 12 mm / 1.6" x 0.5") and 35 x 11 mm / 1.4" x 0.43" holder and are offered in the following widths: 120 up to 200 mm / 4.7" up to 7.9".

Angle knives for vibro-tines

Straight (1) or offset angle (2) knives are available on request. They are cutting the soil near the plant row and guide the earth flow away from the row. They cut weeds near the row, but minimise the risk of burying. The unworked hoeing-strip can be cleaned by accessories such as finger weeders or rotative weeder elements. Angle knives can be mounted on Einböck-special-vibro-tines with duckfoot sweeps (40 x 12 mm / 1.6" x 0.5") and 35 x 11 mm / 1.4" x 0.43" holder and are offered in the following widths: 120 up to 200 mm / 4.7" up to 7.9".

Heaping shares for vibro-tines as well as S-tines

Heaping shares are used for hilling up the plant rows in late crop stage (e.g. last use with soya). This strengthens the crop plant (and root) and buries weeds in the row.

Heaping shares for vibro-tines as well as S-tines

Heaping shares are used for hilling up the plant rows in late crop stage (e.g. last use with soya). This strengthens the crop plant (and root) and buries weeds in the row.

Reinforcement spring for vibro-tines as well as s-tines

The reinforcement springs ensure ideal work of the sweeps or blades in crusted or heavy soils, as well as stony conditions.

Reinforcement spring for vibro-tines as well as s-tines

The reinforcement springs ensure ideal work of the sweeps or blades in crusted or heavy soils, as well as stony conditions.

Equipment options

Equipment options

 CHOPSTAR 1-30CHOPSTAR 3-60CHOPSTAR 5-90CHOPSTAR 10-150CHOPSTAR-TWINCHOPSTAR-VERSOCHOPSTAR-PRIMECarbide equipment
Standard vibro-tines (1 & 2)SSOO--SO

Einböck-special-vibro-tines (4 & 5)

OOOOSSOO
Einböck-special-ultraflat sweeps (3)OOOOOOO-
S-tinesOOSS--OO
Heaping sharesOOOO--O-
Angle knives-OOOSSO-
Reinforcement springOOOOOOOO

 

O: optional

S: standard equipment

Whether additional options can be combined with each other or whether special parts may be required for options to be implemented (e.g. deviation row distance), please clarify directly with an Einböck consultant.

Further information

Further
information

TOP

Contact

Kontaktanfrage - ausführlich EN

Formular
Name
Contact details
Upload