Row crop cultivator spacing up to 30 cm CHOPSTAR for cereals, field beans,...

Advantagesrow crop cultivatorCHOPSTAR 1-30

Technical datarow crop cultivatorCHOPSTAR 1-30

  • Row distance variable between 20 cm and 30 cm
  • Lower links guided on both sides
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Farmflex-feeler-wheels adjustable through spindles, ball bearing mounted, ø 300 mm / 100 mm wide
  • Robust, adjustable parallelogram
  • Vibrotine 32 x 12 with holder 30 x 10
  • Hoe element with 1 duckfoot sweep 180 mm
  • Front mounted machines with track indicator for improved guidance
  • Conversion from rear to front mounting

Optionsrow crop cultivatorCHOPSTAR 1 - 30

  • Fame-profile extension
  • Asymetric arrangement of parallelograms
  • Height adjustable weeder tines
  • Parallelogram guided crop deflector plates, row distance of 25 cm
  • Protection discs, adjustable in height, row distance of 30 cm
  • Upper link Cat. III for rear mount machines with upper-link steering
  • Warning signs with holder and LED-lights

 

 

 

 

Advantages of hoeing
Beside the positive effect for the crop (water saving, weed control, breaking of crusts, soil aeration, ...) hoeing has many additional advantages for the soil (nutrient-mobilization, disruption of capillary action, protection against erosion, fertilizer application,...) and for the environment. So you can reduce or eliminate the expenditure of herbicide- and active ingredients, further stretch of water and also species richness are protected and soil fertility is increased.

Advantages of hoeing
Beside the positive effect for the crop (water saving, weed control, breaking of crusts, soil aeration, ...) hoeing has many additional advantages for the soil (nutrient-mobilization, disruption of capillary action, protection against erosion, fertilizer application,...) and for the environment. So you can reduce or eliminate the expenditure of herbicide- and active ingredients, further stretch of water and also species richness are protected and soil fertility is increased.

Type/
Working width

Transport width in m 1

Frame lengthin m/

mounting category

Tines

Hoe elements

from
HP/kW

Weight (approx. kg)

REAR MOUNTED

 

 

 

 

 

 

EGS 12-rows RIGID

3.20

3.20 / II

13

13

40/30

700

EGS 16-rows HG 2

3.00

4.20 / II

17

17

70/51

1 200

EGS 24-rows HG 2

3.00

6.20 / II

25

25

80/59

1 560

EGS 32-rows HG 2,3

3.30

8.20 / II

33

33

90/66

2 120

FRONT MOUNTED

 

 

 

 

 

 

EGS 12-rows RIGID

3.20

3.20 / II

13

13

40/30

680

EGS 16-rows HG 2

3.00

4.20 / II

17

17

70/51

1 100

EGS 24-rows HG 2

3.00

6.20 / II

25

25

80/59

1 450

EGS 32-rows HG 2

3.30

8.20 / II

33

33

90/66

1 940

 

Frame-profile-length = row distance x rows + 20 cm/7.9“ (transport width will change!)

1 depending on row spacing

2 hydraulic folding – triple-frame

3 2 high-gauge-wheels instead of upper link steering and 1 rubber support wheel each on the outer wing

 

Detail Description

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Section-Control - hydr. lifting of sections
Hydraulic lifting of the parallelogram up to 35 cm above the ground (depending on the machine configuration) controlled with GPS-signal or via illuminated pressure switch bar.

Section-Control - hydr. lifting of sections
Hydraulic lifting of the parallelogram up to 35 cm above the ground (depending on the machine configuration) controlled with GPS-signal or via illuminated pressure switch bar.

Wide range of different widths of duckfoot sweeps for the Vibro-tines
The flat position of the sweeps which can be mounted on the Vibro-tines enable the machine to cut the full surface between the rows in a shallow working depth, which is important for effective weed control. According to the row distance, crop and consistency of the soil the vibro-tines with 30x10 mm can be equipped with duckfoot sweeps in the widths of 80 up to 300 mm. To change the working depth easily the holders are equipped with slotted groves. The duckfoot sweeps are mounted with screws to the holders, which ensure a secure mounting, but nevertheless they can be changed quickly.

Wide range of different widths of duckfoot sweeps for the Vibro-tines
The flat position of the sweeps which can be mounted on the Vibro-tines enable the machine to cut the full surface between the rows in a shallow working depth, which is important for effective weed control. According to the row distance, crop and consistency of the soil the vibro-tines with 30x10 mm can be equipped with duckfoot sweeps in the widths of 80 up to 300 mm. To change the working depth easily the holders are equipped with slotted groves. The duckfoot sweeps are mounted with screws to the holders, which ensure a secure mounting, but nevertheless they can be changed quickly.

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3m)
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3m)

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3m)
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3m)

Even when working in shapeless fields there is no damage on the crop at the headlands. This option is particularly recommended for contractors or farms with a lot of fields with irregular form.

Even when working in shapeless fields there is no damage on the crop at the headlands. This option is particularly recommended for contractors or farms with a lot of fields with irregular form.

Automatic upper-link steering
In case the machine is ordered without a camera steering system, it comes standard with an upper-link steering system with metal-gauge wheels.

Automatic upper-link steering
In case the machine is ordered without a camera steering system, it comes standard with an upper-link steering system with metal-gauge wheels.

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side)stability and accuracy even after many years of use.

  1. The parallelogramm is fixed with a clamping lever to the frame
  2. Parallelogramm for front-mounted machines
  3. Parallelogramm for rear-mounted machines

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side)stability and accuracy even after many years of use.

  1. The parallelogramm is fixed with a clamping lever to the frame
  2. Parallelogramm for front-mounted machines
  3. Parallelogramm for rear-mounted machines

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Automatic sideshift frame with camera-guidance
A ROW-GUARD sideshift frame can be mounted to each row crop cultivator, also retro-fitted.

Automatic sideshift frame with camera-guidance
A ROW-GUARD sideshift frame can be mounted to each row crop cultivator, also retro-fitted.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines come standard with a track indicator.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines come standard with a track indicator.

Individual equipment of hoeing elements
The row crop cultivator with 1 tine per hoeing section is designed for hoeing of fields with a row distance of up to 30 cm. This version is e.g. for grain, peas, rape, or lupines. Furthermore you can use deflector elements protect the plants from spilling (especially in early crop stage). Deflector plates are optionally available from a row distance of 25 cm. From 30 cm you can also use deflector discs. You can find the various options and the different tines in ""Technical data"" or in ""Options"". The big range of different hoeing tools makes the CHOPSTAR a row crop cultivator, which can be adapted to every condition, crop or type of soil.

Individual equipment of hoeing elements
The row crop cultivator with 1 tine per hoeing section is designed for hoeing of fields with a row distance of up to 30 cm. This version is e.g. for grain, peas, rape, or lupines. Furthermore you can use deflector elements protect the plants from spilling (especially in early crop stage). Deflector plates are optionally available from a row distance of 25 cm. From 30 cm you can also use deflector discs. You can find the various options and the different tines in ""Technical data"" or in ""Options"". The big range of different hoeing tools makes the CHOPSTAR a row crop cultivator, which can be adapted to every condition, crop or type of soil.

Einböck-special-vibrotines with duckfoot sweeps
The flat position of the sweeps which are mounted on the vibro-tines allows to cut the entire surface even at a shallow working depth, what is important for effective weed control. Duckfoot sweeps for the 40 x 12mm (1,57 inch x 0,47 inch) vibrotines are available from 80mm to 300mm (3,14 inch x 11,8 inch) width to meet different row spacings, crop and soil conditions.
Slotted grooves on all holders ensure easy adjustment of height position and working depth. The extremely wear-resistant duckfoot sweeps are mounted with a single bolt, what ensures a safe fixing, but they still can be replaced quickly.

Einböck-special-vibrotines with duckfoot sweeps
The flat position of the sweeps which are mounted on the vibro-tines allows to cut the entire surface even at a shallow working depth, what is important for effective weed control. Duckfoot sweeps for the 40 x 12mm (1,57 inch x 0,47 inch) vibrotines are available from 80mm to 300mm (3,14 inch x 11,8 inch) width to meet different row spacings, crop and soil conditions.
Slotted grooves on all holders ensure easy adjustment of height position and working depth. The extremely wear-resistant duckfoot sweeps are mounted with a single bolt, what ensures a safe fixing, but they still can be replaced quickly.

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

Einböck-special-ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps with lowest possible earth movement are available as an additional option. These are offered in the following widths: 140 up to 220mm / 5,5 - 8,6"
They are available for the 30x10mm / 1,2x0,4" holder and can be mounted on the 32x12mm / 1,2x0,5" and 40x12mm / 1,6x0,5" vibro-tine.
Like all Einböck holders, they also have slatted grooves for easy adjustment of the working depth. This special-ultraflat duckfoot sweep is specially recommended for row-crop cultivators working in narrow row spacing, e.g. grain.

Einböck-special-ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps with lowest possible earth movement are available as an additional option. These are offered in the following widths: 140 up to 220mm / 5,5 - 8,6"
They are available for the 30x10mm / 1,2x0,4" holder and can be mounted on the 32x12mm / 1,2x0,5" and 40x12mm / 1,6x0,5" vibro-tine.
Like all Einböck holders, they also have slatted grooves for easy adjustment of the working depth. This special-ultraflat duckfoot sweep is specially recommended for row-crop cultivators working in narrow row spacing, e.g. grain.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for fingerweeders, guarantee exact adjustment and precise hoeing.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for fingerweeders, guarantee exact adjustment and precise hoeing.

Advantages of camera steering system ROW GUARD

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Advantages of camera steering system ROW GUARD

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Reinforcement spring
Reinforcement spring for the S-tine and the vibrotine ensure ideal work in soil with hard crust, heavy soil as well as stony conditions.

Reinforcement spring
Reinforcement spring for the S-tine and the vibrotine ensure ideal work in soil with hard crust, heavy soil as well as stony conditions.

Automatic upper link steering
Rear-mounted row-crop cultivators come standard with an automatic upper link steering system. This ensures exact hoeing, also on hills and bends. Even hoeing in hills with up to 6 % inclination is possible. The row-crop cultivator is guided exactly behind the tractor, even if there are a lot of bends. The cultivator is steered via the upper link of the 3-point hitch by metal gauge-wheels, therefore the machine is used with position control on the 3-point linkage and freely swinging lower links (approx. 7 cm each side).

Automatic upper link steering
Rear-mounted row-crop cultivators come standard with an automatic upper link steering system. This ensures exact hoeing, also on hills and bends. Even hoeing in hills with up to 6 % inclination is possible. The row-crop cultivator is guided exactly behind the tractor, even if there are a lot of bends. The cultivator is steered via the upper link of the 3-point hitch by metal gauge-wheels, therefore the machine is used with position control on the 3-point linkage and freely swinging lower links (approx. 7 cm each side).

S-Tine
For deeper work there are S-Tines with 100 mm or 180 mm (3,93 inch x 7,08 inch) duckfoot sweeps instead of the standard vibro-tines.

S-Tine
For deeper work there are S-Tines with 100 mm or 180 mm (3,93 inch x 7,08 inch) duckfoot sweeps instead of the standard vibro-tines.

Adjustable weeder tines
Adjustable weeder tines can be mounted for pulling weeds to the surface and ensure they dry out. They clean the roots of the weeds from soil and at the same time they slightly level the cultivated areas.

Adjustable weeder tines
Adjustable weeder tines can be mounted for pulling weeds to the surface and ensure they dry out. They clean the roots of the weeds from soil and at the same time they slightly level the cultivated areas.

Gauge-wheels on machines with upper link steering
The high-gauge wheels provide an optimal guidance of the row-crop cultivator, as well as stability in hilly conditions. The weight of the cultivator is carried by the gauge wheels, therefore traction on the front wheels of the tractor is not affected by the heavy weight of the cultivator. Especially on slopes, the high-gauge wheels prevent the machine from drifting downwards. Cleaners ensure that the high gauge-wheels do not pull out too much soil.

 

Gauge-wheels on machines with upper link steering
The high-gauge wheels provide an optimal guidance of the row-crop cultivator, as well as stability in hilly conditions. The weight of the cultivator is carried by the gauge wheels, therefore traction on the front wheels of the tractor is not affected by the heavy weight of the cultivator. Especially on slopes, the high-gauge wheels prevent the machine from drifting downwards. Cleaners ensure that the high gauge-wheels do not pull out too much soil.

 

Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Pushed sections on front mounted machine
The front-mounted row crop cultivator can be used without an extra front mounting support as the elements are strong enough to be operated in pushed position. This results in the row crop cultivator being mounted very closely to the tractor, which has following advantages:

  • Less side pull when working in hills
  • More exact adaption of each separate element because the Farmflex-wheels are running in front of the element
  • Reduced weight to reduce soil compaction
  • Short distance between cultiavator and front axle, therefore higher precision in steering
  • Advantage when driving bends during operation, as well as road transport
  • Better visual control during operation and also road transport

There is a front mounting support available as an option in case needed (e.g. for ROLLSTAR row crop cultivators).

Pushed sections on front mounted machine
The front-mounted row crop cultivator can be used without an extra front mounting support as the elements are strong enough to be operated in pushed position. This results in the row crop cultivator being mounted very closely to the tractor, which has following advantages:

  • Less side pull when working in hills
  • More exact adaption of each separate element because the Farmflex-wheels are running in front of the element
  • Reduced weight to reduce soil compaction
  • Short distance between cultiavator and front axle, therefore higher precision in steering
  • Advantage when driving bends during operation, as well as road transport
  • Better visual control during operation and also road transport

There is a front mounting support available as an option in case needed (e.g. for ROLLSTAR row crop cultivators).

High frame clearance
A frame clearance up to 70 cm makes working in bigger crops like maize, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

High frame clearance
A frame clearance up to 70 cm makes working in bigger crops like maize, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

Seeder for undersowing or fertilizing
As options for this operation there are the seeding box P-BOX-STI (1) or the front tank JUMBO-SEED (2) available.

Seeder for undersowing or fertilizing
As options for this operation there are the seeding box P-BOX-STI (1) or the front tank JUMBO-SEED (2) available.

Additional options like following weeder tines, section-control element lifting, camera steering system, hilling tools, etc.
Many sophisticated additional options make every Einböck row crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all various possibilities under "Options".

Additional options like following weeder tines, section-control element lifting, camera steering system, hilling tools, etc.
Many sophisticated additional options make every Einböck row crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all various possibilities under "Options".

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)


Further tailor-made solutions
For our hoes there are a lot of additional options available. Depending on row distance or other options they might not be available or could not be combined with each other. In addition, there are more options available which are not mentioned here. When you let us know details of your request, we can check the possibility to fulfil your request. To be able to do so, we always need a filled in CHOPSTAR-CHECKLIST.


 

Manual hydraulic steering
In order to increase the precision of a row crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with fingerweeders and hydraulic lifting of the parallelograms.

Manual hydraulic steering
In order to increase the precision of a row crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with fingerweeders and hydraulic lifting of the parallelograms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, section control, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/forms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, section control, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/forms.

Conceptrow-crop cultivatorCHOPSTAR 1-30

  • e.g. for grain, peas, rapeseed, lupines, …
  • equipped with 1 vibrotine
  • row distance: up to 30 cm / 11,8''
  • following elements: weeder tines
  • sweeps and tines: duckfoot sweeps, EINBÖCK-special-vibrotines, ultraflat sweeps
  • protection elements: without protection element, crop deflector shields or discs
  • e.g. for grain, peas, rapeseed, lupines, …
  • equipped with 1 vibrotine
  • row distance: up to 30 cm / 11,8''
  • following elements: weeder tines
  • sweeps and tines: duckfoot sweeps, EINBÖCK-special-vibrotines, ultraflat sweeps
  • protection elements: without protection element, crop deflector shields or discs

Concept of row-crop cultivators

The concept of the CHOPSTAR row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Brochures row-crop cultivator CHOPSTAR 1-30
Brochures row-crop cultivator CHOPSTAR 1-30
Brochures row-crop cultivator CHOPSTAR 1-30
Downloads Downloads

Videos row-crop cultivator CHOPSTAR 1-30

Videos
row-crop cultivator
CHOPSTAR 1-30

Photos row-crop cultivator CHOPSTAR 1-30

Photos
row-crop cultivator
CHOPSTAR 1-30

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!​​​​​​​

Row-crop cultivator CHOPSTAR 1-30

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

Row-crop cultivator CHOPSTAR 1-30

Row-crop cultivator
CHOPSTAR 1-30

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

The row hoe CHOPSTAR does not only control weeds, but also achieves excellent results in soil aeration, nitrogen mobilization, regulation of the water balance etc. The CHOPSTAR 1-30 has 1 tine per hoeing section and is suited for row crop with a row distance of up to 30 cm. like e.g. grain, beans, etc. These cultivators are mainly used in medium to heavy soil. On the hoeing-sections weeder tines can be mounted additionally.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP