row crop cultivator spacing up to 150 cm CHOPSTAR for pumpkin - universally adapted

Options row crop cultivatorCHOPSTAR 10-150

  • Frame-profile extension
  • Asymetric arrangement of parallelograms
  • Trailing weeder tines adjustable, mounted behind the hoe element
  • Crop deflector discs serrated
  • Hydraulic steering support for extremly hilly terrain
  • Holder with rotation-weeder element
  • Support wheels for finger-hoe
  • Upper link Cat. III for rear mount machines with upper-link steering
  • Warning signs wit holder and LED-lights

Detail Description:

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

 

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

 

Einböck-Special-Ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps are available as an additional option.
These are offered in the following widths: 140, 160, 180, 200 and 220mm / 5,5 - 8,6''
They are available with the 30x10mm / 1,2x0,4'' holder and can be mounted on the 32x12mm / 1,2x0,5'' and 40x12mm / 1,6x0,5'' vibro-spring.
Like all Einböck holders, this ones also have slatted grooves for easier adjustment of the working depth and to ensure better grip.

Einböck-Special-Ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps are available as an additional option.
These are offered in the following widths: 140, 160, 180, 200 and 220mm / 5,5 - 8,6''
They are available with the 30x10mm / 1,2x0,4'' holder and can be mounted on the 32x12mm / 1,2x0,5'' and 40x12mm / 1,6x0,5'' vibro-spring.
Like all Einböck holders, this ones also have slatted grooves for easier adjustment of the working depth and to ensure better grip.

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Angle knives

Straight or cranked angle knives are available on request.

Angle knives

Straight or cranked angle knives are available on request.

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Warning signs and lights

Warning signs and lights are available optionally.

Warning signs and lights

Warning signs and lights are available optionally.

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

Technical data row crop cultivator CHOPSTAR 10-150

  • Last tine with reinforcing spring and adjustable in height        
  • Row distance variable up to 150 cm
  • Lower links guided on both sides
  • Mounting category CAT II
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Robust, adjustable parallelogram
  • Side position of tines can be adjusted very easily and quickly
  • Parallelogram guided crop deflector plates (height adjustable) or crop deflector discs (can be lifted)
  • Hydraulic steering support
  • Farmflex-feeler-wheels adjustable through spindles, ball bearing mounted, ø 300 mm / 100 mm wide
  • Front mounted machines with track indicator for improved guidance
  • Conversion from rear to front mounting without extra charge - only possible in standard configuration
  • Hoe element complete - all duckfoot sweeps 180 mm

Concept row-crop cultivator CHOPSTAR 10-150

Type/working width

Transport width m 1

Frame length m

tines

Hoe elements

from HP/kW

Weight approx. kg

 

EKS 2-rows RIGID

3.00

2.55

20

4

40/30

480

EKS 3-rows HG2

3.00

4.05

30

6

60/44

1000

 

EKS 2-rows RIGID

3.00

2.55

20

4

40/30

440

EKS 3-rows HG2

3.00

4.05

30

6

60/44

900

 

1 for a row width of 150 cm

2 hydraulic folding – triple frame

  • e.g. for pumpkins, ...
  • equipped with up to 10 tines (S-tines or vibrotines)
  • row distance: up to 150 cm / 59''
  • following elements: weeder tines, rotative weeder or finger hoe
  • tines: duckfoot sweeps, EINBÖCK-special-vibrotines,ultraflat sweeps, angle-knives, heaping shares
  • protection element: without protection element, crop deflector shields or discs
  • e.g. for pumpkins, ...
  • equipped with up to 10 tines (S-tines or vibrotines)
  • row distance: up to 150 cm / 59''
  • following elements: weeder tines, rotative weeder or finger hoe
  • tines: duckfoot sweeps, EINBÖCK-special-vibrotines,ultraflat sweeps, angle-knives, heaping shares
  • protection element: without protection element, crop deflector shields or discs

Concept of row crop cultivators

The concept of the row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

 

Brochures row crop cultivator CHOPSTAR 10-150
Brochures
row crop cultivator
CHOPSTAR 10-150
Brochures row crop cultivator CHOPSTAR 10-150
Downloads Downloads

Advantages row crop cultivatorCHOPSTAR 10-150

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Videos row crop cultivator CHOPSTAR 10-150

Videos
row crop cultivator
CHOPSTAR 10-150

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

Photos row crop cultivator CHOPSTAR 10-150

Photos
row crop cultivator
CHOPSTAR 10-150

Hoeing section for a row distance of up to 150 cm
The hoeing section of the CHOPSTAR 10-150 has up to 10 tines for a row distance of up to 150 cm. It is very well suited for pumpkin etc.

Hoeing section for a row distance of up to 150 cm
The hoeing section of the CHOPSTAR 10-150 has up to 10 tines for a row distance of up to 150 cm. It is very well suited for pumpkin etc.

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Row crop cultivator CHOPSTAR 10-150

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

Row crop cultivator CHOPSTAR 10-150

Row crop cultivator
CHOPSTAR 10-150

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

 

The row hoe CHOPSTAR does not only control weeds, but also achieves excellent results in soil aeration, nitrogen mobilization, regulation of the water balance etc. The CHOPSTAR 10-150 has up to 10 tines per hoeing section and is suited for row crop with a row distance of up to 150 cm. like e.g. pumpkin etc. These cultivators are mainly used in medium to heavy soil. On the hoeing-sections weeder tines can be mounted additionally. On the hoeing-sections a lot of different options like hilling elements, hilling sweeps, weeder tines, finger-hoes, etc. can be mounted.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP