row crop cultivator spacing up to 60 cm CHOPSTAR for soy, beets, potatoes,...

Technical data row crop cultivator CHOPSTAR 3-60

  • Row spacing can be adjusted between 25 cm and 59 cm
  • Lower links guided on both sides
  • Mounting category CAT II / from 18 row triple frame, CAT III
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Farmflex-feeler-wheels adjustable by spindles, ball bearing mounted, ø 300 mm / 100 mm wide
  • Robust, adjustable parallelogram
  • Parallelogram guided crop deflector plates (height adjustable) or crop deflector discs (can be lifted)
  • Vibrotine 32 x 12 with holder 30 x 10
  • Full hoeing element with 3 Vibrotines - 2 duckfoot sweeps 140 mm and in the centre 1 duckfoot sweep 160 mm
  • Half hoeing element with 2 Vibrotines - 1 duckfoot sweep 140 mm and in the centre 1 duckfoot sweep 160 mm
  • Front mounted machines with track indicator for improved guidance
  • Conversion from rear to front mounting without extra charge - only possible in standard

Concept row-crop cultivator CHOPSTAR 3-60

Type/working width

Transport width m ²

Frame length m

Tines

Hoe elements

from HP/kW

Weight ca. kg

       

Rear with full crop deflector discs

     

ERS 5-rows RIGID¹

2.45

2.45 / II

16

6

30/22

630

ERS 6-rows RIGID

3.00

3.00 / II

19

7

40/30

660

ERS 8-rows HG³

3.00

3.80 / II

25

9

60/44

990

ERS 12-rows HG³

3.00

5.60 / II

37

13

70/51

1 380

ERS 15-rows HG3,6

3.20

6.95 / II

46

16

90/66

1 780

ERS 18-rows HG3,7

4.80

8.30 / III

55

19

130/96

2 120

ERS 18-rows HG4

3.00

8.30 / II

55

19

130/96

2 310

ERS 24-rows HG3,5

6.70

11.00 / III

73

25

160/118

2 700

ERS 24-rows HG4

4.00

11.00 / III

73

25

160/118

2 910

       

Rear with crop deflector plates

      

ERS 5-rows RIGID¹

2.45

2.45 / II

16

6

30/22

620

ERS 6-rows RIGID

3.00

3.00 / II

19

7

40/30

640

ERS 8-rows HG³

3.00

3.80 / II

25

9

60/44

980

ERS 12-rows HG³

3.00

5.60 / II

37

13

70/51

1 390

ERS 15-rows HG3,6

3.20

6.95 / II

46

16

90/66

1 650

ERS 18-rows HG3,7

4.80

8.30 / III

55

19

130/96

2 160

ERS 18-rows HG4

3.00

8.30 / II

55

19

130/96

2 360

ERS 24-rows HG³,5

6.70

11.00 / III

73

25

160/118

2 770

ERS 24-rows HG4

4.00

11.00 / III

73

25

160/118

2 840

       

Front with full crop deflector discs

     

ERS 6-rows RIGID

3.00

3.00 / II

19

7

40/30

830

ERS 8-rows HG³

3.00

3.80 / II

25

9

60/44

970

ERS 12-rows HG³

3.00

5.60 / II

37

13

70/51

1 270

       

Front with crop deflector discs

      

ERS 6-rows RIGID

3.00

3.00 / II

19

7

40/30

860

ERS 8-rows HG³

3.00

3.80 / II

25

9

60/44

1 000

ERS 12-rows HG³

3.00

5.60 / II

37

13

70/51

1 300

 

¹ with support - gauge wheels follow the tractor track 

² on the standard version - depending on row spacing - detail upon request or on order confirmation

³ hydraulic retraction – triple-frame

4 hydraulic retraction - double folding frame, 4 air wheels 18x8.50 instead of upper-link steering Cat. II on 18 rows, Cat. III on 24 rows

5 4 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

6 2 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

7 4 gauge wheels instead of upper-link steering

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

  • e.g. for beets, soybeans, peas, rapeseed, …
  • equipped with up to 3 vibrotines
  • row distance: up to 60 cm / 23,6''
  • following elements: weeder tines, rotative weeder or finger hoe
  • sweeps and tines: EINBÖCK-special-vibrotines,  ultraflat sweeps, angle-knives, heaping shares, …
  • protection elements: without protection element, crop deflector shields or discs
  • e.g. for beets, soybeans, peas, rapeseed, …
  • equipped with up to 3 vibrotines
  • row distance: up to 60 cm / 23,6''
  • following elements: weeder tines, rotative weeder or finger hoe
  • sweeps and tines: EINBÖCK-special-vibrotines,  ultraflat sweeps, angle-knives, heaping shares, …
  • protection elements: without protection element, crop deflector shields or discs

Concept of row-crop cultivators

The concept of the row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

 

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

 

Brochures row-crop cultivator CHOPSTAR 3-60
Brochures row-crop cultivator CHOPSTAR 3-60
Brochures row-crop cultivator CHOPSTAR 3-60
Downloads Downloads

Advantagesrow crop cultivatorCHOPSTAR 3-60

Options row crop cultivatorCHOPSTAR 3-60

 

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Videos row-crop cultivator CHOPSTAR 3-60

Videos
row-crop cultivator
CHOPSTAR 3-60

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

Photos row-crop cultivator CHOPSTAR 3-60

Photos
row-crop cultivator
CHOPSTAR 3-60

Einböck-Special-Ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps are available as an additional option.
These are offered in the following widths: 140, 160, 180, 200 and 220mm / 5,5 - 8,6''
They are available with the 30x10mm / 1,2x0,4'' holder and can be mounted on the 32x12mm / 1,2x0,5'' and 40x12mm / 1,6x0,5'' vibro-spring.
Like all Einböck holders, this ones also have slatted grooves for easier adjustment of the working depth and to ensure better grip.

Einböck-Special-Ultraflat duckfoot sweeps
To enable a clean and flat cut, extra flat Einböck special duckfoot sweeps are available as an additional option.
These are offered in the following widths: 140, 160, 180, 200 and 220mm / 5,5 - 8,6''
They are available with the 30x10mm / 1,2x0,4'' holder and can be mounted on the 32x12mm / 1,2x0,5'' and 40x12mm / 1,6x0,5'' vibro-spring.
Like all Einböck holders, this ones also have slatted grooves for easier adjustment of the working depth and to ensure better grip.

Hoeing section for a row distance of up to 60 cm
The hoeing section of the CHOPSTAR 3-60 has 3 tines for a row distance of up to 60 cm. It is very well suited for beets, soya, etc.

Hoeing section for a row distance of up to 60 cm
The hoeing section of the CHOPSTAR 3-60 has 3 tines for a row distance of up to 60 cm. It is very well suited for beets, soya, etc.

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

 

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

 

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!​​​​​​​

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Angle knives

Straight or cranked angle knives are available on request.

Angle knives

Straight or cranked angle knives are available on request.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

Heaping shares

Heaping shares are used for hilling up the plant rows. They can be mounted on the holder of the vibrotine as well as on the S-spring tine.

Heaping shares

Heaping shares are used for hilling up the plant rows. They can be mounted on the holder of the vibrotine as well as on the S-spring tine.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Warning signs and lights

Warning signs and lights are available optionally.

Warning signs and lights

Warning signs and lights are available optionally.

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

Row crop cultivator CHOPSTAR 3-60

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

Row crop cultivator CHOPSTAR 3-60

Row crop cultivator
CHOPSTAR 3-60

  • Row hoe with vibro tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

The row hoe CHOPSTAR does not only control weeds, but also achieves excellent results in soil aeration, nitrogen mobilization, regulation of the water balance etc. The CHOPSTAR 3-60 has 3 tines per hoeing section and is suited for row crop with a row distance of up to 60 cm. like e.g. beets, soya, etc. These cultivators are mainly used in medium to heavy soil. On the hoeing-sections weeder tines can be mounted additionally. On the hoeing-sections a lot of different options like hilling elements, hilling sweeps, weeder tines, finger-hoes, etc. can be mounted.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP