row crop cultivator spacing up to 90 cm CHOPSTAR with finger hoe for maize

technical data row crop cultivator CHOPSTAR 5-90

  • Standard S-tine (vibro tines optionally available)
  • Last tine with reinforcement spring and adjustable in height
  • Row distance variable between 60 and 70 cm                
  • Lower links guided on both sides
  • Mounting category CAT II / from 12 row triple frame, CAT III
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Robust, adjustable parallelogram                          
  • Side position of tines can be adjusted very easily and quickly               
  • Parallelogram guided crop deflector plates, height adjustable (Crop deflector discs can be lifted and are available as an option)  
  • Farmflex-feeler-wheels adjustable through spindles, ball bearing mounted, ø 300 mm / 100 mm wide                          
  • Quick conversion from rear to front mounting without extra charge - only possible in standard version
  • Front mounted machines with track indicator for improved guidance

options row crop cultivatorCHOPSTAR 5-90

  • Asymetric arrangement of parallelograms
  • Crop deflector plates or crop deflector discs serrated
  • Support for finger-hoe required for rigid, front mounted hoes up to 4 rows or for mounting the steering wheels behind the tractor wheels on rear mounted machines, only necessary for rigid machines
  • 2 additional support wheels for finger-hoe - version for front machines (dim. 16x6.50/8)
  • Upper link Cat. III for rear mount machines with upper-link steering
  • Pneumatic Airseeder

 

 

 

Type/working width

Transport width m 2

Frame length m

tines

Hoe elemets

HP/kW

Weight ca. kg

Rear with crop deflector plates

EMS 2-rows RIGID¹

1.60

1.60

11

3

20/15

470

EMS 4-rows RIGID

3.00

3.00

21

5

40/30

640

EMS 4-rows HG3

3.00

3.00

21

5

50/37

920

EMS 6-rows RIGID

4.40

4.40

31

7

60/44

930

EMS 6-rows HG3

3.00

4.40

31

7

60/44

1120

EMS 8-rows RIGID

5.80

5.80

41

9

80/59

1 140

EMS 8-rows HG3

3.20

5.80

41

9

80/59

1 320

EMS 12-rows HG3,5

4.80

8.60

61

13

140/103

2 040

EMS 12-rows HG4

3.00

8.60

61

13

140/103

2 270

EMS 16-rows HG3,5

6.90

11.40

81

17

160/118

2 550

Front with crop deflector plates 

EMS 2-rows RIGID

1.60

1.60

11

3

20/15

390

EMS 4-rows RIGID

3.00

3.00

21

5

40/30

560

EMS 4-rows HG3

3.00

3.00

21

5

50/37

700

EMS 6-rows RIGID

4.40

4.40

31

7

60/44

720

EMS 6-rows HG3

3.00

4.40

31

7

60/44

1020

EMS 8-rows HG3

3.20

5.80

41

9

80/59

1 220

 

¹ with support - gauge wheels follow the tractor track                                                   

2 depending on row distance - detail upon request or on order confirmation                             

3 hydraulic retraction – triple-frame                                                                        

4 hydraulic retraction - double folding frame, 4 air wheels 18x8.50 instead of upper link steering - Cat. II

5,4 gauge wheels instead of upper-link steering                                                                            

 

Mounted sweeps

Row spacing

Front row of tines

Hoe element complete / full

Middle row of tines

Hoe element complete / full

Last row of tines

Hoe element complete / full

60-69 cm

2 pieces / 1 piece

120 mm half-duckfoot sweep

2 pieces / 1 piece

105 mm duckfoot sweep

1 piece

180 mm duckfoot sweep

70-74 cm

2 pieces / 1 piece

120 mm half-duckfoot sweep

2 pieces / 1 piece

180 mm duckfoot sweep

1 piece

180 mm duckfoot sweep

From 75 cm

2 pieces / 1 piece

180 mm duckfoot sweep

2 pieces / 1 piece

180 mm duckfoot sweep

1 piece

180 mm duckfoot sweep

 

 

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Different sizes of duckfoot sweeps with vibrotines

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 30mm x 10mm (1,18 inch x 0,39 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

S-tine

with 100mm or 180mm (3,93 inch x 7,08 inch) duckfoot sweeps

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Einböck special vibrotines with duckfoot sweeps

Depending on the row spacing, culture and soil conditions, duckfoot sweeps are available with 40mm x 12mm (1,57 inch x 0,47 inch) vibrotines in the following widths of the sweeps from 80mm to 300mm (3,14 inch x 11,8 inch).

Slotted grooves on all holders ensure better grip.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

Reinforcement spring
Reinforcement spring for the S-spring tine and the vibrotine.

Angle knives

Straight or cranked angle knives are available on request.

Angle knives

Straight or cranked angle knives are available on request.

Heaping shares

Heaping shares are used for hilling up the plant rows. They can be mounted on the holder of the vibrotine as well as on the S-spring tine.

Heaping shares

Heaping shares are used for hilling up the plant rows. They can be mounted on the holder of the vibrotine as well as on the S-spring tine.

Hilling element
This hilling element can be mounted instead of the rear tine of the CHOPSTAR 5-90 to maintain potato hills or hill crop rows.

Hilling element
This hilling element can be mounted instead of the rear tine of the CHOPSTAR 5-90 to maintain potato hills or hill crop rows.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Adjustable weeder tines

The outer tines on each section can be turned around, in order to push soil away from or towards the row.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Warning signs and lights

Warning signs and lights are available optionally.

Warning signs and lights

Warning signs and lights are available optionally.

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

Section-Control - hydr. lifting of hoe

Hydraulic lifting of hoe up to 35 cm above the ground (depending on the machine configuration)

controlled with GPS-signal or via illuminated pressure switch

brochures row-crop cultivator CHOPSTAR 5-90
brochures row-crop cultivator CHOPSTAR 5-90
Downloads Downloads

advantages row crop cultivatorCHOPSTAR 5-90

concept of row crop cultivators

The concept of the CHOPSTAR row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

videos row-crop cultivator CHOPSTAR 5-90

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a front mounted machine

2. Frame for a rear-mounted machine with upper-link steering

3. Frame for a front mounted machine, hydraulic folding

4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

5. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

Parallelogramms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Mounting the parallelogramwith a single clamp lever

2. Parallelogramm on front mounted machines

3. Parallelogramm on rear mounted machines
 

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Hoeing section for a row distance of up to 90 cm
The hoeing section of the CHOPSTAR 5-90 has 5 tines for a row distance of up to 90 cm. It is very well suited for corn sunflower, etc.

Hoeing section for a row distance of up to 90 cm
The hoeing section of the CHOPSTAR 5-90 has 5 tines for a row distance of up to 90 cm. It is very well suited for corn sunflower, etc.

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.
 

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Track indicator
Because the front-view to the crops is often restricted, front mounted machines are standard equipped with a track indicator.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Row crop cultivator CHOPSTAR 5-90

  • Row hoe with spring tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

Row crop cultivator CHOPSTAR 5-90

Row crop cultivator
CHOPSTAR 5-90

  • Row hoe with spring tines
  • Perfect mechanical weeding
  • Increased aeration
  • Disruption of capillary action
  • Breaking of crusts
  • Suited for various crops and row distances

 

The row hoe CHOPSTAR does not only control weeds, but also achieves excellent results in soil aeration, nitrogen mobilization, regulation of the water balance etc. The CHOPSTAR 5-90 has 5 tines per hoeing section and is suited for row crop with a row distance of up to 90 cm. like e.g. corn sunflower, etc. These cultivators are mainly used in medium to heavy soil. On the hoeing-sections weeder tines can be mounted additionally. On the hoeing-sections a lot of different options like hilling elements, hilling sweeps, weeder tines, finger-hoes, etc. can be mounted.

conceptconceptconcept
advantagesadvantagesadvantages
technical datatechnical datatechnical data
optionsoptionsoptions
mediamediamedia
TOP