row crop cultivator CHOPSTAR-HYBRID - hoe in mulch till

Options row-crop cultivatorCHOPSTAR-HYBRID

  • Frame-profile extension
  • Asymetric arrangement of parallelograms
  • Crop deflector discs or crop deflector shields (can also be used for mounting of an additional Vibrotine)
  • Metal gauge wheels instead of Farmflex-wheel
  • Upper link Cat. III for rear mount machines with upper-link steering
  • Hydraulic steering support for extremely hilly terrain
  • Warning signs with holder and LED-lights

Detail Description

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Finger weeders

The finger weeders work in between the plants in the crop row. For the front version additional support wheels are required.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper link steering

The action of the upper link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Warning signs and lights

Warning signs and lights are available optionally.

Warning signs and lights

Warning signs and lights are available optionally.

Technical data row crop cultivator CHOPSTAR-HYBRID

  • Depending on configuration and number of rows, as well as diameter of the horizontal disc a row spacing  25 - 50 cm
    (diameter of horizontal disc 180 mm - 450 mm) is possible
  • Lower links guided on both sides
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Farmflex-feeler-wheels adjustable by spindles, ball bearing mounted, ø 300 mm/100 mm wide
  • Robust, adjustable parallelogram - XL Version
  • Parallelogram guided crop deflector plates (adjustable in height) or crop deflector discs (can be raised) are available as optional equipment
  • Carrier for horizontal disc with shearbolt overload protection
  • Element full with horizontal disc ø 350 mm
  • Half-element with horizontal disc  ø 250 mm
  • Different diameters of horizontal discs on request
  • The mentioned transport width is achieved by changing some components to transport position

 

Concept row-crop cultivator CHOPSTAR HYBRID

Type/ 
Working width

Transport
width in m 1

Profilelength m/
mounting category

Plates

Hoe elements

from
HP/kW

Weight (approx. kg)

EHH 6-reihig STARR

3.00

3.00 / II

7

7

60/44

660

EHH 8-reihig HG2

3.00

3.80 / II

9

9

70/51

990

EHH 12-reihig HG2

3.00

5.60 / II

13

13

90/66

1.380

EHH 15-reihig HG2,5

3.00

6.95 / II

16

16

100/99

1.780

EHH 18-reihig HG2,6

4.80

8.30 / III

19

19

130/96

2.120

EHH 18-reihig HG3

3.00

8.30 / II

19

19

130/96

2.310

EHH 24-reihig HG2,4

6.70

11.00 / III

25

25

160/118

2.700

EHH 24-reihig HG3

4.20

11.00 / III

25

25

160/118

2.910

 

1 standard version - depending on row spacing - details upon request or on the order confirmation

2 hydraulic folding - tripple frame

3 hydraulic folding - double fold, 4 pcs. airwheels 18x8.50 instead of upper link steering

   Cat. II on 18-rows, Cat. III on 24-rows

4 4 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

5 2 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

6 4 gauge wheels instead of upper link steering

  • for mulch till and fields with organic matter
  • for row distance up to 50 cm / 19,7''
  • equipped with 1 disc up to 45 cm diameter
  • with farmflex-wheel or metal gauge wheel
  • protection element: without protection element, crop deflector shields or discs
  • for mulch till and fields with organic matter
  • for row distance up to 50 cm / 19,7''
  • equipped with 1 disc up to 45 cm diameter
  • with farmflex-wheel or metal gauge wheel
  • protection element: without protection element, crop deflector shields or discs

Concept of row crop cultivators

The concept of the row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

 

Row crop cultivator CHOPSTAR-HYBRID

  • Inter-row crop cultivator with horizontal discs
  • Hoeing in mulcht-till
  • Perfect mechanic weed-control
  • Disc hoe
  • Operates short below the surface
  • Suited for special crops

Row crop cultivator CHOPSTAR-HYBRID

Row crop cultivator
CHOPSTAR-HYBRID

  • Inter-row crop cultivator with horizontal discs
  • Hoeing in mulcht-till
  • Perfect mechanic weed-control
  • Disc hoe
  • Operates short below the surface
  • Suited for special crops
Brochure row crop cultivator CHOPSTAR-HYBRID
Brochure row crop cultivator CHOPSTAR-HYBRID
Brochure row crop cultivator CHOPSTAR-HYBRID
Downloads Downloads
DE EN FR

Advantages row crop cultivatorCHOPSTAR-HYBRID

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a rear-mounted machine with upper-link steering

2. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

3. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Strong frames for high loads
The frame, on which the parallelograms are mounted, is available in a rigid or a hydraulic folding version. The special profile-frame allows mounting of the parallelograms through a single clamp lever.
1. Frame for a rear-mounted machine with upper-link steering

2. Frame for a rear-mounted machine, hydraulic folding with upper-link steering

3. Frame for a rear-mounted machine with double folding frame (4 hinge points) for reduced transport width for large machines
 

Parallelograms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Parallelogram with FarmFlex wheel (standard)

2. Parallelogram with metal gauge wheel (optional)

Parallelograms with downpressure adjustment
The special profile-frame allows mounting of the parallelograms through a single clamp lever. The paralleograms are equipped with downpressure adjustment and Farmflex depth control wheels.
1. Parallelogram with FarmFlex wheel (standard)

2. Parallelogram with metal gauge wheel (optional)

Photos row crop cultivator CHOPSTAR-HYBRID

Photos
row crop cultivator
CHOPSTAR-HYBRID

Horizontal discs
The horizontal disc is mounted at the parallelogram with shearbolt overload protection. The full element has a horizontal disc with ø 350 mm, the half element has a horizontal disc with ø 250 mm. Different diameters of horizontal discs are available on request.

  1. Horizontal disc
  2. Horizontal disc with crop deflector discs (optional)
  3. Horizontal disc with crop deflector shields (optional)

Horizontal discs
The horizontal disc is mounted at the parallelogram with shearbolt overload protection. The full element has a horizontal disc with ø 350 mm, the half element has a horizontal disc with ø 250 mm. Different diameters of horizontal discs are available on request.

  1. Horizontal disc
  2. Horizontal disc with crop deflector discs (optional)
  3. Horizontal disc with crop deflector shields (optional)

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Variable adjustment of working depth
The working depth of the hoe element can be adjusted through the spindle of the Farmflex feeler wheel. The tension spring and the adjustment bracket control the downforce of the parallelogram.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

Automatic upper-link steering
Depending on the number of rows, rear- mounted machines are equipped with an automatic upper-link steering system. It allows operation on slopes up to 6 %. In turns or contour strips the cultivator will follow exactly the tractor. The steering is done via high gauge-wheels so there is no need for the tractor to carry the machine. It is operated with activated automatic hitch control and freely movable lower links (approx. 7 cm / 3“ each side). This ensures that the front wheels of the tractor retain full traction, which gives a better maneuverability, especially in hilly terrain.

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.

High-gauge wheels

High-gauge wheels provide an optimal guidance of the row crop cultivator (rear mount machines only). The weight of the cultivator is carried by the gauge wheels, therefore traction of the front wheels is not effected.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

Clevis mounting brackets

Clevis mounting brackets with removable pin.

The CHOPSTAR-HYBRID inter-row crop cultivator with horizontal discs is the perfect solution for hoeing in mulch-till. Based on the proven CHOPSTAR hoeing frame there are ­ at discs mounted to the hoeing section that can rotate freely. The diameter is adapted to the desired row spacing. These discs cut through the soil just below the surface. They harm the roots of the weeds respectively hoe the weed just below the soil surface and below the mulch layer. High-gauge wheels are mounted in front of the discs. They cut the soil and the mulch layer vertically to guarantee a smooth operation without any clogging.

It is also the first choice for hoeing in special crops, in vegetables and in crops with a lot of green mass because it operates below the leaves and doesn´t harm the crop. The ­ at discs and the cutting high-gauge wheels prevent a clogging also in fields with a high amount of weed, as it could happen with conventional tines. This guarantees a perfect hoeing result.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP