Plate row-crop cultivator CHOPSTAR-HYBRID - hoe in mulch till

Optionsplate row-crop cultivatorCHOPSTAR-HYBRID

  • Other cutting disc diameters on request
  • Metal gauge wheels instead of Farmflex-wheel
  • Finger hoe
  • Rotation weeder element
  • Parallelogram guided crop deflector pates (height adjustable)
  • Protection discs (can be fixed in upright position)
  • Warning signs with LED-lights
  • Hydraulic steering pilot for extreme slopes
  • Hydraulic manual steering with seat
  • Camera steering system ROW-GUARD
  • P-BOX seeder for undersowing or fertilizing
  • Other accessories customizable

Detail Description

Section-Control – hydraulic lifting sections
The hydraulic parallelogram lift has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.
Even with misshapen areas, nothing is hoed out at the headland. This option is especially recommended for contractors or farms with a lot of misshapen areas.
Hydraulic lifting is also possible for finger hoes.

Section-Control – hydraulic lifting sections
The hydraulic parallelogram lift has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.
Even with misshapen areas, nothing is hoed out at the headland. This option is especially recommended for contractors or farms with a lot of misshapen areas.
Hydraulic lifting is also possible for finger hoes.

Even when working in shapeless fields there is no damage on the crop at the headlands. This option is particularly recommended for contractors or farms with a lot of fields with irregular form.

Even when working in shapeless fields there is no damage on the crop at the headlands. This option is particularly recommended for contractors or farms with a lot of fields with irregular form.

Finger weeders
The finger weeders work in between the plants in the crop row. There is no need to adjust them in angle to each other, as they anyway bend up parallel to the ground when they are adjusted correctly. For front-mounted hoes additional support wheels are required.

Finger weeders
The finger weeders work in between the plants in the crop row. There is no need to adjust them in angle to each other, as they anyway bend up parallel to the ground when they are adjusted correctly. For front-mounted hoes additional support wheels are required.

The spring-loaded holder ensures the fingers will perfectly enter the ground. This is very important so that they can work ideally even on encrusted or uneven fields. There are three different versions of the hardness of the finger weeders, depending on the crop and soil conditions.

The spring-loaded holder ensures the fingers will perfectly enter the ground. This is very important so that they can work ideally even on encrusted or uneven fields. There are three different versions of the hardness of the finger weeders, depending on the crop and soil conditions.

A parallel arrangement of the 2 stars, as well as a separate holder per row for the fingerweeders are important for an exact operation.

A parallel arrangement of the 2 stars, as well as a separate holder per row for the fingerweeders are important for an exact operation.

Finger weeders for double folding frame
To keep the transport width for machines with double folding frame as narrow as possible, there are special holders for the fingerweeders available. Like all Einböck fingerweeders, they have a separate holder on which a parallelogram is mounted that guides the stars left and right of the plant row. In this way, despite the different design, they achieve the same perfect results as the standard holder of the fingerweeder.

Finger weeders for double folding frame
To keep the transport width for machines with double folding frame as narrow as possible, there are special holders for the fingerweeders available. Like all Einböck fingerweeders, they have a separate holder on which a parallelogram is mounted that guides the stars left and right of the plant row. In this way, despite the different design, they achieve the same perfect results as the standard holder of the fingerweeder.

Rotative weeder element
Similar to the fingerweeder the rotative weeder element works the unworked hoeing-strip close to / in the row. The rotating stars "comb" weeds out of the row. The trailed-rotative weeder is used in mulch-till and fields with organic matter, because it works without clogging. The holder on which the rotative weed element is mounted is the same as the one of the fingerweeder. Therefore both options can be exchanged easily.

Rotative weeder element
Similar to the fingerweeder the rotative weeder element works the unworked hoeing-strip close to / in the row. The rotating stars "comb" weeds out of the row. The trailed-rotative weeder is used in mulch-till and fields with organic matter, because it works without clogging. The holder on which the rotative weed element is mounted is the same as the one of the fingerweeder. Therefore both options can be exchanged easily.

Automatic sideshift frame with camera-guidance
A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Automatic sideshift frame with camera-guidance
A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Seeder for undersowing or fertilizing
As options for this operation there are the seeding box P-BOX-STI (1) or the front tank JUMBO-SEED (2) available.

Seeder for undersowing or fertilizing
As options for this operation there are the seeding box P-BOX-STI (1) or the front tank JUMBO-SEED (2) available.

Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Monitoring camera for row-crop cultivator
The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.
 

Monitoring camera for row-crop cultivator
The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.
 

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)


Further tailor-made solutions
For our hoes there are a lot of additional options available. Depending on row distance or other options they might not be available or could not be combined with each other. In addition, there are more options available which are not mentioned here. When you let us know details of your request, we can check the possibility to fulfil your request. To be able to do so, we always need a filled in CHOPSTAR-CHECKLIST.


 

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with fingerweeders and hydraulic lifting of the parallelograms.

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with fingerweeders and hydraulic lifting of the parallelograms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, section control, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, section control, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Technical dataplate row-crop cultivatorCHOPSTAR-HYBRID

  • Depending on configuration and number of rows, as well as diameter of the horizontal plate, a row spacing between 25 (9.80") - 50 cm (19.70")
    (diameter of horizontal disc 180 mm / 7.10" - 450 mm / 17.70") is possible
  • Lower links guided on both sides
  • Rear mounted machines: autom. upper link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Farmflex-feeler-wheels adjustable by spindles, ball bearing mounted, Ø 300 mm / 11.80" / 100 mm / 3.90" wide
  • Robust, adjustable parallelogram - XL Version
  • Carrier for horizontal disc with shearbolt overload protection
  • Element full with horizontal disc Ø 350 mm / 13.80"
  • Half-element with horizontal disc Ø 250 mm / 9.80"

Advantagesplate row-crop cultivatorCHOPSTAR-HYBRID

Type/ 
Working width

Transport
width in m 1

Profilelength m/
mounting category

Plates

Hoe elements

from
HP/kW 7

Weight (approx. kg)

EHH 6-rows RIGID8

3.00

3.00 / II

7

7

60/44

660

EHH 8-rows HG2

3.00

3.80 / II

9

9

70/51

990

EHH 12-rows HG2

3.05

5.60 / II

13

13

90/66

1.380

EHH 15-rows HG2,5

3.00

6.95 / II

16

16

100/99

1.780

EHH 18-rows HG2,6

4.80

8.30 / III

19

19

130/96

2.120

EHH 18-rows HG3

3.00

8.30 / II

19

19

130/96

2.310

EHH 24-rows HG2,4

6.70

11.00 / III

25

25

160/118

2.700

EHH 24-rows HG3

4.20

11.00 / III

25

25

160/118

2.910

 

1 standard version - depending on row spacing

2 hydraulic folding - tripple frame

3 hydraulic folding - double fold, 4 pcs. airwheels 18x8.50 instead of upper link steering

   Cat. II on 18-rows, Cat. III on 24-rows

4 4 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

5 2 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

6 4 gauge wheels instead of upper link steering

7 HP/kW only valid for machines in base specification

8 intermediate frame with steering wheels included

Advantages of hoeing 
Beside the positive effect for the crop (water saving, weed control, breaking of crusts, soil aeration, ...) hoeing has many additional advantages for the soil (nutrient-mobilization, disruption of capillary action, fertilizer application,...) and for the environment. So you can reduce or eliminate the expenditure of herbicide- and active ingredients, further stretch of water and also species richness are protected and soil fertility is increased.

Advantages of hoeing 
Beside the positive effect for the crop (water saving, weed control, breaking of crusts, soil aeration, ...) hoeing has many additional advantages for the soil (nutrient-mobilization, disruption of capillary action, fertilizer application,...) and for the environment. So you can reduce or eliminate the expenditure of herbicide- and active ingredients, further stretch of water and also species richness are protected and soil fertility is increased.

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6% is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2,80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6% is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2,80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions: 

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3m) 
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3m)

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions: 

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3m) 
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3m)

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side)stability and accuracy even after many years of use.

  1. Parallelogramm with Farmflex feeler wheels (standard)
  2. Parallelogramm with metal gauge wheels (optional)

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side)stability and accuracy even after many years of use.

  1. Parallelogramm with Farmflex feeler wheels (standard)
  2. Parallelogramm with metal gauge wheels (optional)

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for fingerweeders, guarantee exact adjustment and precise hoeing.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for fingerweeders, guarantee exact adjustment and precise hoeing.

Hybrid-hoeing element with horizontal discs
A horizontal disc works the complete area between the rows, so all roots of the weeds are cut. The disc carrier is mounted on the parallelogramm so the disc can rotate freely. Therefore the possibility of clogging is reduced to a minimum as the section cleans itself before organic material can build up too much. Against overload the section is protected by a shearbolt. Optionally the element can be equipped with a steerable metal gauge wheel instead of the Farmflex-wheel, what has a very big advantage. Organic matter is cut in front of the holder of the horizontal disc in order to reduce the risk of clogging even more. The hybrid hoeing section is available for rows up to 50 cm / 19.70". 

  1. Element with horizontal disc
  2. Crop deflector discs (optional)
  3. Crop deflector shields (optional)

Hybrid-hoeing element with horizontal discs
A horizontal disc works the complete area between the rows, so all roots of the weeds are cut. The disc carrier is mounted on the parallelogramm so the disc can rotate freely. Therefore the possibility of clogging is reduced to a minimum as the section cleans itself before organic material can build up too much. Against overload the section is protected by a shearbolt. Optionally the element can be equipped with a steerable metal gauge wheel instead of the Farmflex-wheel, what has a very big advantage. Organic matter is cut in front of the holder of the horizontal disc in order to reduce the risk of clogging even more. The hybrid hoeing section is available for rows up to 50 cm / 19.70". 

  1. Element with horizontal disc
  2. Crop deflector discs (optional)
  3. Crop deflector shields (optional)

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

High retraction support of hoeing elements
All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

High retraction support of hoeing elements
All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

Design of the finger weeders
The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.

Design of the finger weeders
The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.

Advantages of camera steering system ROW GUARD 

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Advantages of camera steering system ROW GUARD 

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Automatic upper link steering
Rear-mounted row-crop cultivators come standard with an automatic upper link steering system. This ensures exact hoeing, also on hills and bends. Even hoeing in hills with up to 6 % inclination is possible. The row-crop cultivator is guided exactly behind the tractor, even if there are a lot of bends. The cultivator is steered via the upper link of the 3-point hitch by metal gauge-wheels, therefore the machine is used with position control on the 3-point linkage and freely swinging lower links (approx. 7 cm each side).

Automatic upper link steering
Rear-mounted row-crop cultivators come standard with an automatic upper link steering system. This ensures exact hoeing, also on hills and bends. Even hoeing in hills with up to 6 % inclination is possible. The row-crop cultivator is guided exactly behind the tractor, even if there are a lot of bends. The cultivator is steered via the upper link of the 3-point hitch by metal gauge-wheels, therefore the machine is used with position control on the 3-point linkage and freely swinging lower links (approx. 7 cm each side).

Gauge wheels on implements with upper link steering
The gauge wheels ensure perfect guidance of the hoe and stability at hilly conditions. The tractor's front wheels are not relieved of load, as the weight of the machine is carried by the gauge wheels. Especially on hilly conditions, the gauge wheels help prevent the implement from drifting. Scrapers ensure that the gauge wheels do not become clogged.

Gauge wheels on implements with upper link steering
The gauge wheels ensure perfect guidance of the hoe and stability at hilly conditions. The tractor's front wheels are not relieved of load, as the weight of the machine is carried by the gauge wheels. Especially on hilly conditions, the gauge wheels help prevent the implement from drifting. Scrapers ensure that the gauge wheels do not become clogged.

High frame clearance
A frame clearance up to 70 cm / 27.6 " makes working in bigger crops like maize, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

High frame clearance
A frame clearance up to 70 cm / 27.6 " makes working in bigger crops like maize, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

Additional options like following weeder tines, section-control element lifting, camera steering system, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all various possibilities under "Options".

Additional options like following weeder tines, section-control element lifting, camera steering system, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all various possibilities under "Options".

Conceptplate row-crop cultivatorCHOPSTAR-HYBRID

  • For mulch till and fields with organic matter
  • For row spacing up to 50 cm / 19,70''
  • Equipped with 1 disc up to 45 cm / 17.70" diameter
  • With farmflex-wheel or metal gauge wheel
  • Protection elements: without protection elements, crop deflector shields or discs
  • For mulch till and fields with organic matter
  • For row spacing up to 50 cm / 19,70''
  • Equipped with 1 disc up to 45 cm / 17.70" diameter
  • With farmflex-wheel or metal gauge wheel
  • Protection elements: without protection elements, crop deflector shields or discs

Concept of row-crop cultivators

The concept of the row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

 

Photos plate row-crop cultivator CHOPSTAR-HYBRID

Photos
plate row-crop cultivator
CHOPSTAR-HYBRID

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

Plate row-crop cultivator CHOPSTAR-HYBRID

  • Inter-row-crop cultivator with horizontal discs
  • Hoeing in mulcht-till
  • Perfect mechanic weed-control
  • Disc hoe
  • Operates short below the surface
  • Suited for special crops

Plate row-crop cultivator CHOPSTAR-HYBRID

Plate row-crop cultivator
CHOPSTAR-HYBRID

  • Inter-row-crop cultivator with horizontal discs
  • Hoeing in mulcht-till
  • Perfect mechanic weed-control
  • Disc hoe
  • Operates short below the surface
  • Suited for special crops

The CHOPSTAR-HYBRID plate hoe is the perfect solution for hoeing weeds in mulch seeded crops. Flat plates are mounted on the hoeing elements and can rotate free. These discs cut through the soil just below the surface. This cuts through the roots of the weeds or hoes the weeds just below the surface and under the mulch layer. Gauge wheels can be optionally mounted in front of the discs, which cut into the soil and mulch layer and guarantee smooth, blockage-free running of the discs.

This disc hoe is also the best choice for use in special crops, in vegetable production and in crops with a lot of organic material, as it can work under the material and the crop is not damaged in the process. Through the flat plates and the cutting gauge wheels mean that the machine does not become blocked when there are a lot of weeds, as it might be the case with tines. The hoeing can therefore be done without any problems.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP