The CHOPSTAR-TWIN precision hoe was developed for precise hoeing above the row. The hoeing parallelogram does not work between the rows, but is mounted directly above the row. This allows a very narrow hoeing belt, which makes it possible to hoe young crops very early and narrow at the same time.
This is achieved by two cutting disc adjustable in angle in combination with following angle knives: two Farmflex wheels running close to the crop row ensure an exact working depth of the hoeing elements. The CHOPSTAR-TWIN, in combination with the camera steering system ROW-GUARD, is perfectly suited as a precision hoe for special crops, cereals, soybeans, beets, corn, vegetables, herbs, etc.
Precision row-crop cultivator for hoeing over the row
Narrow hoeing belt with unworked area less than 5 cm / 1.9''
E.g. for corn, soybeas, broad beas, beet,…
Row distance: up to 75 cm / 29.5''
Equipped with 2 cutting discs and up to 4 tines (2 angle-knives and up to 2 bypass-tines)
Following elements: weeder tines, rotative weeder or finger weeder
Precision row-crop cultivator for hoeing over the row
Narrow hoeing belt with unworked area less than 5 cm / 1.9''
E.g. for corn, soybeas, broad beas, beet,…
Row distance: up to 75 cm / 29.5''
Equipped with 2 cutting discs and up to 4 tines (2 angle-knives and up to 2 bypass-tines)
Following elements: weeder tines, rotative weeder or finger weeder
Concept of row-crop cultivators
The concept of the CHOPSTAR row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy after many years of use. The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.
Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy after many years of use. The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.
Twin-hoeing element with vertical cutting discs and angle knives
The hoeing section is guided by two Farmflex-support wheels left and right of the row. It is equipped with two vertical cutting discs, which are followed by two angle knives. They are mounted on vibro-springs, so it is possible to work very closely and shallow to the crop. The result is that young crops can be hoed earlier, closer to the crop and with higher working speed than with standard row-crop cultivators without burying plants. In ideal conditions a hoeing band of less than 5 cm / 1.90" can be realized. The CHOPSTAR-TWIN can be configured from 30 cm / 11.80" up to 75 cm / 29.50".
Twin-hoeing element with vertical cutting discs and angle knives
The hoeing section is guided by two Farmflex-support wheels left and right of the row. It is equipped with two vertical cutting discs, which are followed by two angle knives. They are mounted on vibro-springs, so it is possible to work very closely and shallow to the crop. The result is that young crops can be hoed earlier, closer to the crop and with higher working speed than with standard row-crop cultivators without burying plants. In ideal conditions a hoeing band of less than 5 cm / 1.90" can be realized. The CHOPSTAR-TWIN can be configured from 30 cm / 11.80" up to 75 cm / 29.50".
Weed control over the full surface
The earlier and the closer to the row hoeing can take place, the easier the weed control in the row can be done (e.g. by finger weeders or rotative weeder elements). This ensures reduced weed pressure and supports a good establishment of the crop.
Weed control over the full surface
The earlier and the closer to the row hoeing can take place, the easier the weed control in the row can be done (e.g. by finger weeders or rotative weeder elements). This ensures reduced weed pressure and supports a good establishment of the crop.
Hoeing in mulch and no-till crops The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.
Hoeing in mulch and no-till crops The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.
Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.
Continuously variable adjustment of the working depth
The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.
High retraction support of hoeing elements
All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg / 231 lbs on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.
High retraction support of hoeing elements
All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg / 231 lbs on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.
Design of the finger weeders
The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.
Design of the finger weeders
The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.
sideshift frame and row-crop cultivator are mounted very closely together
one sideshift frame can be used for several row-crop cultivators
latest version of hard- and software
reliable row recognition in different row-crops
best visibility - even in fields with heavy weed infestation and/or small crop
Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc. Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".
Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc. Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".
For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...
For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".
Advantages of mechanical weed control
For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...
For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".
„100 % made by EINBÖCK in AUSTRIA“
In-house development from the idea to serial production We have over 85 years experience in designing of agricultural machinery.
From practitioner for practitioner 75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
Suppliers from the region and Central Europe Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
„100 % made by EINBÖCK in AUSTRIA“
In-house development from the idea to serial production We have over 85 years experience in designing of agricultural machinery.
From practitioner for practitioner 75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
Suppliers from the region and Central Europe Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
Manufacturing exclusively in Dorf an der Pram in Upper Austria Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
Practical testing of all machines on our own test fields Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
After-sales service A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Manufacturing exclusively in Dorf an der Pram in Upper Austria Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
Practical testing of all machines on our own test fields Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
After-sales service A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Technical data
CHOPSTAR‑TWIN
Depending on the specification and the configuration, as well as the width of the sweeps, the row spacing can be adjusted from 35 cm / 13.80"
Lower links guided on both sides
Automatic upper link steering with upper link spindle and gauge wheels
Adjustable retraction support on each parallelogram
Two adjustable Farmflex-feeler wheels, bearing mounted, Ø 300 mm / 11.80" / 65 mm / 2.56" wide per parallelgoram
Robust, adjustable parallelogram
Vertical cutting discs Ø 220 mm / 8.66" adjustable in angle and in distance to each other
Vibrotine 40x12 with holder 35x11 and angle knive 120 mm / 4.70" incl. guiding plate
Hoeing parallelogram mounted above the crop row
Type/ working width
Transport width8 in
m / ft
Frame length in m / ft / mounting category
Tines
Hoe element
from
HP / kW 7
weight approx.
kg / lbs
ETH 5-rows RIGID1
2.30 / 7.50
2.00 / 6.60 / II
10
5
30 / 22
580 / 1.279
ETH 6-rows RIGID9
2.75 / 9.00
2.45 / 8.00 / II
12
6
40 / 30
610 / 1.345
ETH 8-rows HG2
3.00 / 9.80
3.35 / 11.00 / II
16
8
60 / 44
940 / 2.072
ETH 12-rows HG2
3.00 / 9.80
5.15 / 16.90 / II
24
12
70 / 51
1.330 / 2.932
ETH 15-rows HG2,5
3.20 / 10.50
6.50 / 21.30 / II
30
15
90 / 66
1.730 / 3.814
ETH 18-rows HG2,6
4.80 / 15.70
7.85 / 25.80/ III
36
18
130 / 96
2.070 / 4.564
ETH 18-rows HG3
3.05 / 10.00
7.85 / 25.80 / II
36
18
130 / 96
2.260 / 4.982
ETH 24-rows HG2,4
6.70 / 22.00
10.55 / 34.60 / III
48
24
160 / 118
2.650 / 5.842
ETH 24-rows HG3
4.00 / 13.10
10.55 / 34.60 / III
48
24
160 / 118
2.860 / 6.305
¹ cannot be used with Row-Guard, intermediate frame with steering wheels included
2 hydraulic folding - tripple frame
3 hydraulic folding - double fold, 4 pcs. airwheels 18x8.50 instead of upper link steering Cat. II on 18-rows, Cat. III on 24-rows
4 4 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing
5 2 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing
6 4 gauge wheels instead of upper link steering
7 HP/kW only valid for machines in base specification
8 Standard version - depending on row spacing
9 intermediate frame with steering wheels included
Technical data and specifications are approximate and without obligation. Construction and design are subject to change.
Strong frame for high loads Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.
Frame for a front-mounted rigid machine
Frame for a rear-mounted rigid machine with upper-link-steering
Frame for a front-mounted machine, hydraulic folding
Frame for a rear-mounted machine, hydraulic folding with upper-link steering
Frame for a rear-mounted machine, with double folding for reduced transport width for large machines
Strong frame for high loads Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.
Frame for a front-mounted rigid machine
Frame for a rear-mounted rigid machine with upper-link-steering
Frame for a front-mounted machine, hydraulic folding
Frame for a rear-mounted machine, hydraulic folding with upper-link steering
Frame for a rear-mounted machine, with double folding for reduced transport width for large machines
Hoeing frame in XXL version Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:
Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.)
Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)
Hoeing frame in XXL version Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:
Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.)
Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)
Upper link steering An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.
Upper link steering An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.
Bolted or clamped mounting of the working tools All working tools are bolted or clamped to the frame. This has the following advantages for the user:
Always a tight fit (no getting lose) of the working tools, especially during working on the field
Set distances or working depth are precisely maintained
No deflection of the connections and minimal wear and tear
Durable fixings/clamps withstand many hoeing seasons
Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
Allows very precise, infinitely variable adjustment
Bolted or clamped mounting of the working tools All working tools are bolted or clamped to the frame. This has the following advantages for the user:
Always a tight fit (no getting lose) of the working tools, especially during working on the field
Set distances or working depth are precisely maintained
No deflection of the connections and minimal wear and tear
Durable fixings/clamps withstand many hoeing seasons
Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
Allows very precise, infinitely variable adjustment
Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.
Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.
Set of wrenches A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.
Set of wrenches A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.
Options
CHOPSTAR‑TWIN
Finger weeder
Rotation weeder element
Asymetric arrangement of parallelograms - technical supervision by Einböck recommended!
Height-adjustable weeder tines mounted behind the element
The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.
The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.
The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".
The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".
Bypass-vibrotine For hoeing the unworked area in between the rows for the CHOPSTAR-TWIN-element.
Bypass-vibrotine For hoeing the unworked area in between the rows for the CHOPSTAR-TWIN-element.
Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.
Hydraulic upper-link steering support
The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.
Pneumatic seeding box Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.
Pneumatic seeding box Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.
Monitoring camera for row-crop cultivator
The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.
Monitoring camera for row-crop cultivator
The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.
Warning signs with LED-lights For an extra charge, warning signs with LED-lights to the rear and front are available. (symbol image - different variants depending on the design available)
Warning signs with LED-lights For an extra charge, warning signs with LED-lights to the rear and front are available. (symbol image - different variants depending on the design available)
Further tailor-made solutions For our hoes there are a lot of additional options available. Depending on row distance or other options they might not be available or could not be combined with each other. In addition, there are more options available which are not mentioned here. When you let us know details of your request, we can check the possibility to fulfil your request. To be able to do so, we always need a filled in CHOPSTAR-CHECKLIST.
Manual hydraulic steering In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.
Manual hydraulic steering In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.
Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.
Forms for CHOPSTAR/ROLLSTAR/HILLSTAR
In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.
![[Translate to English:] einboeck-aerostar-fusion-header2.jpg](/fileadmin/user_upload/einboeck/_processed_/3/3/csm_einboeck-aerostar-fusion-header2_635cd48a98.jpg "[Translate to English:]")
![[Translate to English:] einboeck_aerostar_aufgesattelt_trailed_semi-porte_hackstriegel_tined_weeder_herse_etrille_header_overview.jpg](/fileadmin/user_upload/einboeck/_processed_/e/a/csm_einboeck_aerostar_aufgesattelt_trailed_semi-porte_hackstriegel_tined_weeder_herse_etrille_header_overview_d06808bb2e.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-3-zinken-pro-hackelement-CHOPSTAR-3-60-Hackgeraet-bis-zu-60-cm-reihenabstand-hackgeraet-fuer-rueben.jpg](/fileadmin/user_upload/einboeck/_processed_/d/7/csm_Hackgeraete-mit-3-zinken-pro-hackelement-CHOPSTAR-3-60-Hackgeraet-bis-zu-60-cm-reihenabstand-hackgeraet-fuer-rueben_a4013a861d.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-5-zinken-pro-hackelement-CHOPSTAR-5-90-Hackgeraet-bis-zu-90-cm-reihenabstand-hackgeraet-fuer-mais.jpg](/fileadmin/user_upload/einboeck/_processed_/9/2/csm_Hackgeraete-mit-5-zinken-pro-hackelement-CHOPSTAR-5-90-Hackgeraet-bis-zu-90-cm-reihenabstand-hackgeraet-fuer-mais_dfa2e55725.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-10-zinke-pro-hackelement-CHOPSTAR-10-150-hackgeraet-bis-zu-150-cm-reihenabstand-hackgeraet-fuer-kuerbis.jpg](/fileadmin/user_upload/einboeck/_processed_/2/b/csm_Hackgeraete-mit-10-zinke-pro-hackelement-CHOPSTAR-10-150-hackgeraet-bis-zu-150-cm-reihenabstand-hackgeraet-fuer-kuerbis_bb23421e53.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraet-CHOPSTAR-TWIN-Titelbild-neu.JPG](/fileadmin/user_upload/einboeck/_processed_/7/6/csm_Hackgeraet-CHOPSTAR-TWIN-Titelbild-neu_ed5b71f07d.jpg "[Translate to English:]")
![[Translate to English:] einboeck-chopstar-prime-slider-2.jpg](/fileadmin/user_upload/einboeck/_processed_/0/4/csm_einboeck-chopstar-prime-slider-2_2fcf86112a.jpg "[Translate to English:]")
![[Translate to English:] Tellerhacke-CHOPSTAR-HYBRID-hacken-in-mulchbestaenden-scheibenhackgeraet.JPG](/fileadmin/user_upload/einboeck/_processed_/e/0/csm_Tellerhacke-CHOPSTAR-HYBRID-hacken-in-mulchbestaenden-scheibenhackgeraet_33368fd765.jpg "[Translate to English:]")
![[Translate to English:] Rollsternhackgeraet-ROLLSTAR-rollhacke-hackgeraet-fuer-dammkulturen.jpg](/fileadmin/user_upload/einboeck/_processed_/7/3/csm_Rollsternhackgeraet-ROLLSTAR-rollhacke-hackgeraet-fuer-dammkulturen_a250a922f0.jpg "[Translate to English:]")
![[Translate to English:] Haeufelgeraet-HILLSTAR-dammkulturpflege-dammkultur-technik.JPG](/fileadmin/user_upload/einboeck/_processed_/5/a/csm_Haeufelgeraet-HILLSTAR-dammkulturpflege-dammkultur-technik_e6bae81a75.jpg "[Translate to English:]")
![[Translate to English:] header-zubehoer-zinken-scharen-1.jpg](/fileadmin/user_upload/einboeck/_processed_/7/7/csm_header-zubehoer-zinken-scharen-1_7e43ecf533.jpg)
![[Translate to English:] header-presse_einboeck_jumbo_stream.jpg](/fileadmin/user_upload/einboeck/_processed_/6/a/csm_header-presse_einboeck_jumbo_stream_5352a3959b.jpg "[Translate to English:]")
![[Translate to English:] feingrubber-VIBROSTAR-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/a/a/csm_feingrubber-VIBROSTAR-menu_883bf3f306.jpg "[Translate to English:]")
![[Translate to English:] leichtgrubber-TAIFUN-header-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/6/4/csm_leichtgrubber-TAIFUN-header-menu_2ad26b131a.jpg "[Translate to English:]")
![[Translate to English:] Universalgrubber-HURRICANE-Slider2-Schwergrubber-Mulchsaatgrubber-b.jpg](/fileadmin/user_upload/einboeck/_processed_/e/0/csm_Universalgrubber-HURRICANE-Slider2-Schwergrubber-Mulchsaatgrubber-b_8da262ecbd.jpg "[Translate to English:]")
![[Translate to English:] Gruenlandpflege-geraete-GRASS-MANAGER-Slider1-Steigerung-gruenfutterqualitaet-gruenlanderneuerung-technik.JPG](/fileadmin/user_upload/einboeck/_processed_/c/a/csm_Gruenlandpflege-geraete-GRASS-MANAGER-Slider1-Steigerung-gruenfutterqualitaet-gruenlanderneuerung-technik_29e7c3c483.jpg "[Translate to English:]")
![[Translate to English:] header-PNEUMATICSTAR-PRO-STI-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/0/6/csm_header-PNEUMATICSTAR-PRO-STI-menu_73bff9a045.jpg "[Translate to English:]")
![[Translate to English:] Mechanisches-Saegeraet-P-BOX-MD-Slider1-Kleinsamen-saemaschine-Zwischenfrucht-saegeraete-b.jpg](/fileadmin/user_upload/einboeck/_processed_/4/0/csm_Mechanisches-Saegeraet-P-BOX-MD-Slider1-Kleinsamen-saemaschine-Zwischenfrucht-saegeraete-b_e646042e38.jpg "[Translate to English:]")
Concept
Advantages
Technical data
Options
Media
News | Practice
Brochures
