Precision row-crop cultivator CHOPSTAR-TWIN - Early and narrow hoeing exactly above the crop row

Precision row-crop cultivator CHOPSTAR-TWIN

  • Hoeing above the row
  • Narrow hoeing strip
  • Early hoeing
  • Disruption of capillary action
  • Breaking of crusts
  • Angle knives with vertical cutting discs

Precision row-crop cultivator CHOPSTAR-TWIN

Precision row-crop cultivator
CHOPSTAR-TWIN

  • Hoeing above the row
  • Narrow hoeing strip
  • Early hoeing
  • Disruption of capillary action
  • Breaking of crusts
  • Angle knives with vertical cutting discs

The CHOPSTAR-TWIN precision hoe was developed for precise hoeing above the row. The hoeing parallelogram does not work between the rows, but is mounted directly above the row. This allows a very narrow hoeing belt, which makes it possible to hoe young crops very early and narrow at the same time.

This is achieved by two cutting disc adjustable in angle in combination with following angle knives: two Farmflex wheels running close to the crop row ensure an exact working depth of the hoeing elements. The CHOPSTAR-TWIN, in combination with the camera steering system ROW-GUARD, is perfectly suited as a precision hoe for special crops, cereals, soybeans, beets, corn, vegetables, herbs, etc.

ConceptConcept
AdvantagesAdvantages
Technical dataTechnical data
OptionsOptions
MediaMedia
News|PraxisNews | Practice
ProspekteBrochures
Concept

Concept CHOPSTAR‑TWIN

  • Precision row-crop cultivator for hoeing over the row
  • Narrow hoeing belt with unworked area less than 5 cm / 1.9''
  • E.g. for corn, soybeas, broad beas, beet,…
  • Row distance: up to 75 cm / 29.5''
  • Equipped with 2 cutting discs and up to 4 tines (2 angle-knives and up to 2 bypass-tines)
  • Following elements: weeder tines, rotative weeder or finger weeder
  • Precision row-crop cultivator for hoeing over the row
  • Narrow hoeing belt with unworked area less than 5 cm / 1.9''
  • E.g. for corn, soybeas, broad beas, beet,…
  • Row distance: up to 75 cm / 29.5''
  • Equipped with 2 cutting discs and up to 4 tines (2 angle-knives and up to 2 bypass-tines)
  • Following elements: weeder tines, rotative weeder or finger weeder

 

Concept of row-crop cultivators

The concept of the CHOPSTAR row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

 

To our standard hoeing technology

To our special hoeing technology

To our accessories for hoes

Advantages

Advantages CHOPSTAR‑TWIN

"SMART-GRIP" quick adjustment for CHOPSTAR-TWIN
In order to enable the cutting discs and angle knives of the "TWIN" hoeing section to be adapted to different crops quickly, they come as a standard feature with the SMART-GRIP quick adjustment system. This saves time by quickly adapting the row-crop cultivator to a wide range of conditions while maintaining the best possible grip - thanks to a special quadruple clamping. The angle knives can be rigid or spring mounted.

"SMART-GRIP" quick adjustment for CHOPSTAR-TWIN
In order to enable the cutting discs and angle knives of the "TWIN" hoeing section to be adapted to different crops quickly, they come as a standard feature with the SMART-GRIP quick adjustment system. This saves time by quickly adapting the row-crop cultivator to a wide range of conditions while maintaining the best possible grip - thanks to a special quadruple clamping. The angle knives can be rigid or spring mounted.

Long parallelogramms with retraction support

The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy after many years of use. The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Long parallelogramms with retraction support

The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy after many years of use. The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Twin-hoeing element with vertical cutting discs and angle knives

The hoeing section is guided by two Farmflex-support wheels left and right of the row. It is equipped with two vertical cutting discs, which are followed by two angle knives. They are mounted on vibro-springs, so it is possible to work very closely and shallow to the crop. The result is that young crops can be hoed earlier, closer to the crop and with higher working speed than with standard row-crop cultivators without burying plants. In ideal conditions a hoeing band of less than 5 cm / 1.90" can be realized. The CHOPSTAR-TWIN can be configured from 30 cm / 11.80" up to 75 cm / 29.50".

Twin-hoeing element with vertical cutting discs and angle knives

The hoeing section is guided by two Farmflex-support wheels left and right of the row. It is equipped with two vertical cutting discs, which are followed by two angle knives. They are mounted on vibro-springs, so it is possible to work very closely and shallow to the crop. The result is that young crops can be hoed earlier, closer to the crop and with higher working speed than with standard row-crop cultivators without burying plants. In ideal conditions a hoeing band of less than 5 cm / 1.90" can be realized. The CHOPSTAR-TWIN can be configured from 30 cm / 11.80" up to 75 cm / 29.50".

Weed control over the full surface

The earlier and the closer to the row hoeing can take place, the easier the weed control in the row can be done (e.g. by finger weeders or rotative weeder elements). This ensures reduced weed pressure and supports a good establishment of the crop.

Weed control over the full surface

The earlier and the closer to the row hoeing can take place, the easier the weed control in the row can be done (e.g. by finger weeders or rotative weeder elements). This ensures reduced weed pressure and supports a good establishment of the crop.

Hoeing in mulch and no-till crops
The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.

Hoeing in mulch and no-till crops
The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.

Continuously variable adjustment of the working depth

The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

Continuously variable adjustment of the working depth

The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

High retraction support of hoeing elements

All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg / 231 lbs on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

High retraction support of hoeing elements

All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg / 231 lbs on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

Design of the finger weeders

The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.

Design of the finger weeders

The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the fingerweeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the fingerweeder - without damaging the crop and especially the roots.

Advantages of camera steering system ROW GUARD 

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Advantages of camera steering system ROW GUARD 

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crop

Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".

 

Further information on camera steering ROW-GUARD
Further information on hydraulic parallelogram lifting SECTION-CONTROL
Further information on finger & rotative weeder

Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".

 

Further information on camera steering ROW-GUARD
Further information on hydraulic parallelogram lifting SECTION-CONTROL
Further information on finger & rotative weeder

Advantages of mechanical weed control

  • For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
  • For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
  • For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...

For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".

Advantages of mechanical weed control

  • For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
  • For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
  • For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...

For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".

 „100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

 „100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Technical data

Technical data CHOPSTAR‑TWIN

  • Depending on the specification and the configuration, as well as the width of the sweeps, the row spacing can be adjusted from 35 cm / 13.80"
  • Lower links guided on both sides
  • Automatic upper link steering with upper link spindle and gauge wheels
  • Adjustable retraction support on each parallelogram
  • Two adjustable Farmflex-feeler wheels, bearing mounted, Ø 300 mm / 11.80" / 65 mm / 2.56" wide per parallelgoram
  • Robust, adjustable parallelogram
  • Vertical cutting discs Ø 220 mm / 8.66" adjustable in angle and in distance to each other
  • Vibrotine 40x12 with holder 35x11 and angle knive 120 mm / 4.70" incl. guiding plate
  • Hoeing parallelogram mounted above the crop row

Type/
working width

Transport width8 in

m / ft

Frame length in m / ft / mounting category

Tines

Hoe element

 from

HP / kW 7

weight approx.

kg / lbs

ETH 5-rows RIGID1

2.30 / 7.50

2.00 / 6.60 / II

10

5

30 / 22

580 / 1.279

ETH 6-rows RIGID9

2.75 / 9.00

2.45 / 8.00 / II

12

6

40 / 30

610 / 1.345

ETH 8-rows HG2

3.00 / 9.80

3.35 / 11.00 / II

16

8

60 / 44

940 / 2.072

ETH 12-rows HG2

3.00 / 9.80

5.15 / 16.90 / II

24

12

70 / 51

1.330 / 2.932

ETH 15-rows HG2,5

3.20 / 10.50

6.50 / 21.30 / II

30

15

90 / 66

1.730 / 3.814

ETH 18-rows HG2,6

4.80 / 15.70

7.85 / 25.80/ III

36

18

130 / 96

2.070 / 4.564

ETH 18-rows HG3

3.05 / 10.00

7.85 / 25.80 / II

36

18

130 / 96

2.260 / 4.982

ETH 24-rows HG2,4

6.70 / 22.00

10.55 / 34.60 / III

48

24

160 / 118

2.650 / 5.842

ETH 24-rows HG3

4.00 / 13.10

10.55 / 34.60 / III

48

24

160 / 118

2.860 / 6.305

 

¹ cannot be used with Row-Guard, intermediate frame with steering wheels included 

2 hydraulic folding - tripple frame

3 hydraulic folding - double fold, 4 pcs. airwheels 18x8.50 instead of upper link steering Cat. II on 18-rows, Cat. III on 24-rows

4 4 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

5 2 gauge wheels instead of upper link steering and 1 rubber wheel on the side wing

6 4 gauge wheels instead of upper link steering

7 HP/kW only valid for machines in base specification

8 Standard version - depending on row spacing

9 intermediate frame with steering wheels included 

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions: 

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.) 
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions: 

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.) 
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.80" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Mounting of lower-links on 3-point hitch

Lower links are guided on both sides to provide high stability.

Mounting of lower-links on 3-point hitch

Lower links are guided on both sides to provide high stability.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.

Options

Options CHOPSTAR‑TWIN

  • Finger weeder
  • Rotation weeder element
  • Asymetric arrangement of parallelograms - technical supervision by Einböck recommended!
  • Height-adjustable weeder tines mounted behind the element
  • Various vibro-tines, sweeps and angle knifes
  • Bypass tines for hoeing the unworked space
  • Warning signs with LED-lights
  • Hydraulic steering pilot for extreme slopes
  • Hydraulic manual steering with seat
  • Camera steering system ROW-GUARD
  • P-BOX seeder for undersowing or fertilizing
  • Other accessories customizable

 

Detail Description

Hydraulic parallelogram lifting SECTION-CONTROL

The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.

 

More details, photos and videos about the SECTION-CONTROL

Hydraulic parallelogram lifting SECTION-CONTROL

The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.

 

More details, photos and videos about the SECTION-CONTROL

Inter row hoeing with finger & rotative weeder

The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".

 

More details, photos and videos about finger & rotative weeder

Inter row hoeing with finger & rotative weeder

The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".

 

More details, photos and videos about finger & rotative weeder

Automatic sideshift frame with camera-guidance

A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Automatic sideshift frame with camera-guidance

A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Large selection of different tines and sweeps

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Further details of tines & sweeps

Large selection of different tines and sweeps

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Further details of tines & sweeps

Bypass-vibrotine
For hoeing the unworked area in between the rows for the CHOPSTAR-TWIN-element.

Bypass-vibrotine
For hoeing the unworked area in between the rows for the CHOPSTAR-TWIN-element.

Hydraulic upper-link steering support

The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper-link steering support

The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Pneumatic seeding box
Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.

Pneumatic seeding box
Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.

Monitoring camera for row-crop cultivator

The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.

Monitoring camera for row-crop cultivator

The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)

Warning signs with LED-lights
For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)


Further tailor-made solutions
For our hoes there are a lot of additional options available. Depending on row distance or other options they might not be available or could not be combined with each other. In addition, there are more options available which are not mentioned here. When you let us know details of your request, we can check the possibility to fulfil your request. To be able to do so, we always need a filled in CHOPSTAR-CHECKLIST.


 

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR

In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR

In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Media

Media CHOPSTAR‑TWIN

Video precision row-crop cultivator CHOPSTAR-TWIN

Video
precision row-crop cultivator
CHOPSTAR-TWIN

Photos precision row-crop cultivator CHOPSTAR-TWIN

Photos
precision row-crop cultivator
CHOPSTAR-TWIN

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

News | Practice CHOPSTAR‑TWIN

Brochures CHOPSTAR-TWIN

The organic farming handbookThe organic
farming handbook
The FUSION-FARMING handbookThe FUSION-FARMING handbook
Set-up instruction row-crop cultivator CHOPSTAR with SECTION-CONTROLSet-up instruction
Row-crop cultivator CHOPSTAR with SECTION-CONTROL
Brochure Hoeing technologyBrochure
Hoeing technology
Data sheet hoeing technologyData sheet
hoeing technology
TOP

Contact

Kontaktanfrage - ausführlich EN

Formular
Name
Contact details
Upload