Special row-crop cultivator CHOPSTAR-VERSO

Special row-crop cultivator CHOPSTAR-VERSO

  • Hoeing of crusted and stressed soils
  • Weed control in mulch seeding
  • Increased working speeds
  • Big flexibility as well as adaption to crop size
  • High immersing power by rolling tools
  • Very small ,,hoeing belt"

Special row-crop cultivator CHOPSTAR-VERSO

Special row-crop cultivator
CHOPSTAR-VERSO

  • Hoeing of crusted and stressed soils
  • Weed control in mulch seeding
  • Increased working speeds
  • Big flexibility as well as adaption to crop size
  • High immersing power by rolling tools
  • Very small ,,hoeing belt"

The special row-crop cultivator CHOPSTAR-VERSO has a pair of cutting discs and up to 5 vibro tines per hoeing element (of which two angle knives) mounted and can be used in row crops with a row distance of 45 to 80 cm / 17.7" to 31.5" (such as beets, soybeans, field beans, corn, sunflowers, etc.). Through the hollow discs clearing away from the plant as well as adjustable in angle in combination with trailing angle knives can be realised a very small hoeing band. This ensures that young stands can be hoed very early and at the same time narrowly and precisely. Depending on the cultivation conditions and the objective of the hoeing pass, different varities of working tools can be used, e. g. trailed weeder tines, finger weeder stars, roll stars, etc..

 

The camera steering system with the sideshift frame ROW-GUARD and the SECTION-CONTROL- parallelogram hydraulic lifting as well as further additional options can again perfected the precision of the CHOPSTAR-VERSO.

ConceptConcept
AdvantagesAdvantages
Technical dataTechnical data
OptionsOptions
MediaMedia
News|PraxisNews | Practice
ProspekteBrochures
Concept

Concept CHOPSTAR‑VERSO

  • e.g. for beets, soybeans, field beans, rapeseed, corn, sunflowers, sorghum, cereals, ...
  • Possible equipment: 1 pair cutting discs und up to 5 sweeps on different positions; of which up to two angle knives
  • Possible row distance: 45 to 80 cm / 17.7" to 31.5"
  • Trailed elements: trailed weeder tines, rotative weeder elements or finger weeder
  • Sweeps and tines: Einböck special vibrotines, ultraflat sweeps, angle knives, heaping sweeps, ...

 

Concept of row-crop cultivators

The concept of the CHOPSTAR row hoes is its variability and the many possibilities of individual tools for various crops. The same strong and solid frame is used for all row hoes. Almost any row hoe can also be equipped with the automatic camera steering system ROW-GUARD.

 

To our standard hoeing technology

To our special hoeing technology

To our accessories for hoes

Advantages

Advantages CHOPSTAR‑VERSO

Speed, flexibility & perfection: the VERSO advantages at a glance

  • Hoeing in mulch, no-till or strip-till
  • Very high working speed - with the cutting discs, hoeing is possible even at a very early stage of growth
  • Very narrow "hoeing belt" - perfectly prepared for finger weeders or rotative weeders
  • Great flexibility as well as adaptation to crop size
  • Low wear and fuel consumption thanks to the cutting discs
  • High retraction force - CHOPSTAR TWIN concept (cutting discs + angle knives)

Speed, flexibility & perfection: the VERSO advantages at a glance

  • Hoeing in mulch, no-till or strip-till
  • Very high working speed - with the cutting discs, hoeing is possible even at a very early stage of growth
  • Very narrow "hoeing belt" - perfectly prepared for finger weeders or rotative weeders
  • Great flexibility as well as adaptation to crop size
  • Low wear and fuel consumption thanks to the cutting discs
  • High retraction force - CHOPSTAR TWIN concept (cutting discs + angle knives)

"SMART-GRIP" quick adjustment for CHOPSTAR-VERSO
In order to enable the cutting discs and angle knives of the "VERSO" hoeing section to be adapted to different crops quickly, they can be optionally mounted on the SMART-GRIP quick adjustment system. This saves time by quickly adapting the row-crop cultivator to a wide range of conditions while maintaining the best possible grip - thanks to a special quadruple clamping. The angle knives can be rigid or spring mounted.

"SMART-GRIP" quick adjustment for CHOPSTAR-VERSO
In order to enable the cutting discs and angle knives of the "VERSO" hoeing section to be adapted to different crops quickly, they can be optionally mounted on the SMART-GRIP quick adjustment system. This saves time by quickly adapting the row-crop cultivator to a wide range of conditions while maintaining the best possible grip - thanks to a special quadruple clamping. The angle knives can be rigid or spring mounted.

High profitability as well as precision
The VERSO-hoe element is ideally suitable for hoeing in mulch crops as well as a lot of organic matter. Depsite the smallest hoeing belt a very high working speed can be achieved because of the "clearing" cutting discs, which in turn increases the economic efficiency and profitability of the machine enormously. The hoe element can be individually adjusted to the crop size and similar to the TWIN concept an extreme immersing power. Wear and tear as well as the needed fuel requirement can also reduced by the rolling as well as cutting work tools.

High profitability as well as precision
The VERSO-hoe element is ideally suitable for hoeing in mulch crops as well as a lot of organic matter. Depsite the smallest hoeing belt a very high working speed can be achieved because of the "clearing" cutting discs, which in turn increases the economic efficiency and profitability of the machine enormously. The hoe element can be individually adjusted to the crop size and similar to the TWIN concept an extreme immersing power. Wear and tear as well as the needed fuel requirement can also reduced by the rolling as well as cutting work tools.

Individual equipment of the hoeing elements
The hoe elements VERSO 3-60 and VERSO 5-80 for a row distance of 45 to 80 cm / 17.7" to 31.5", has up to 5 tines as well as a pair of cutting discs per hoeing element. The two cutting discs clear soil away from the plant and ensure that the subsequent angle cutters can work in the best possible way. It is particularly suitable as a row-crop cultivator for beets, soybeans, field beans, corn or sunflowers. The angle knives as well as the middle-mounted vibro tines ensure optimum, full-surface cutting between the row at low working depths and therefore perfect weed control. The different trailing tools and sweep options can be found under "Technical data" and under "Options". This large selection of different hoeing tools makes the CHOPSTAR to a row-crop cultivator, which is individually adapted to the crops, various cultivation- or soil conditions.

Individual equipment of the hoeing elements
The hoe elements VERSO 3-60 and VERSO 5-80 for a row distance of 45 to 80 cm / 17.7" to 31.5", has up to 5 tines as well as a pair of cutting discs per hoeing element. The two cutting discs clear soil away from the plant and ensure that the subsequent angle cutters can work in the best possible way. It is particularly suitable as a row-crop cultivator for beets, soybeans, field beans, corn or sunflowers. The angle knives as well as the middle-mounted vibro tines ensure optimum, full-surface cutting between the row at low working depths and therefore perfect weed control. The different trailing tools and sweep options can be found under "Technical data" and under "Options". This large selection of different hoeing tools makes the CHOPSTAR to a row-crop cultivator, which is individually adapted to the crops, various cultivation- or soil conditions.

Arrangement of the hoeing elements - Retraction support of the parallelogram

With the tine hoeing elements (e.g. beet, soybeans, field bean, corn, etc.) from 30 cm / 11.80" row spacing, the hoeing element is placed "under" the elongated parallelogram. It´s advantage is that the hoeing elements and tines are pulled in better even in soils with heavy crusts and hard soils. Due to the long parallelogram, less pressure is needed to push in the tines as if the hoeing elements would be placed "behind" the parallelogram. In addition, an adjustable retraction spring guarantees that the hoeing element gets pushed into the soil and maintains the set working depth.

Arrangement of the hoeing elements - Retraction support of the parallelogram

With the tine hoeing elements (e.g. beet, soybeans, field bean, corn, etc.) from 30 cm / 11.80" row spacing, the hoeing element is placed "under" the elongated parallelogram. It´s advantage is that the hoeing elements and tines are pulled in better even in soils with heavy crusts and hard soils. Due to the long parallelogram, less pressure is needed to push in the tines as if the hoeing elements would be placed "behind" the parallelogram. In addition, an adjustable retraction spring guarantees that the hoeing element gets pushed into the soil and maintains the set working depth.

Highest flexibility as well as fast rebuilding
In order to be able to cultivate at a later hoeing pass, the VERSO hoeing element can be fast rebuilt. The pairs of cutting discs are dismounted and the angle knives are exchanged for standard vibro-tines. On these heaping shares could also be mounted. This fast and uncomplicated rebuilding makes it possible to use the row-crop cultivator as an all-purpose machine in the early stage of the culture as well as in the late stages to the best possible results.
(Attention only possible with options and not in the standard-version)

Highest flexibility as well as fast rebuilding
In order to be able to cultivate at a later hoeing pass, the VERSO hoeing element can be fast rebuilt. The pairs of cutting discs are dismounted and the angle knives are exchanged for standard vibro-tines. On these heaping shares could also be mounted. This fast and uncomplicated rebuilding makes it possible to use the row-crop cultivator as an all-purpose machine in the early stage of the culture as well as in the late stages to the best possible results.
(Attention only possible with options and not in the standard-version)

Hoeing in mulch and no-till crops
The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.

Hoeing in mulch and no-till crops
The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy even after many years of use.

  1. The parallelogramm is fixed with a clamping lever to the frame
  2. Parallelogramm for front-mounted machines
  3. Parallelogramm for rear-mounted machines

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Long parallelogramms with retraction support
The wide parallelogramms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side) stability and accuracy even after many years of use.

  1. The parallelogramm is fixed with a clamping lever to the frame
  2. Parallelogramm for front-mounted machines
  3. Parallelogramm for rear-mounted machines

The long parallelogramms provide enough space to compensate unevenness of the fields on each element, on hills or pans. The retraction support, which you can adjust in three steps, guarantees a better penetration of the hoeing tools, also in hard crusted soils. This allows to work with increased working speed without vibration or jumping of the elements.

Continuously variable adjustment of the working depth

The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

Continuously variable adjustment of the working depth

The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogramm should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

High retraction support of hoeing elements

All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

High retraction support of hoeing elements

All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. This allows a penetration pressure of up to 105 kg on each hoeing element (depending on the equipment, working position and spring preload). These adjustable springs ensure a smooth running of the hoeing elements even at high working speeds and safe penetration even into hard and crusted soils.

Design of the finger weeders

The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the finger weeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the finger weeder - without damaging the crop and especially the roots.

Design of the finger weeders

The finger weeders, which are available as additional option, are used to break up the unworked hoeing belt (area very close to and between the crop plants) and to control weeds in early growth stage. The two stars of the finger weeder are placed parallel on both sides of the row and they are mounted on a separate, spring loaded holder. This ensures excellent adaption to the soil and perfect guidance of the finger weeder - without damaging the crop and especially the roots.

Advantages of camera steering system ROW GUARD

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crops

Advantages of camera steering system ROW GUARD

  • sideshift frame and row-crop cultivator are mounted very closely together
  • one sideshift frame can be used for several row-crop cultivators
  • latest version of hard- and software
  • reliable row recognition in different row-crops
  • best visibility - even in fields with heavy weed infestation and/or small crops

High frame clearance
A frame clearance up to 70 cm / 27.60" makes working in bigger crops like corn, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

High frame clearance
A frame clearance up to 70 cm / 27.60" makes working in bigger crops like corn, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".

 

Further information on camera steering ROW-GUARD
Further information on hydraulic parallelogram lifting SECTION-CONTROL
Further information on finger & rotative weeder

Additional options like the following working tools, SECTION-CONTROL element lifting, camera steering, hilling tools, etc.
Many sophisticated additional options make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil. You can find all possibilities under "Options".

 

Further information on camera steering ROW-GUARD
Further information on hydraulic parallelogram lifting SECTION-CONTROL
Further information on finger & rotative weeder

Advantages of mechanical weed control

  • For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
  • For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
  • For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...

For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".

Advantages of mechanical weed control

  • For the crop: water saving, regulation of weeds, crust breaking, soil aeration,...
  • For the soil: Nutrient mobilization, interruption of capillary effect, fertilizer incorporation,...
  • For the environment: reduction or avoidance of herbicide and active ingredient use, water conservation, biodiversity conservation, biodiversity protection, soil fertility increase,...

For more benefits, tips and interesting facts about tined weeding and hoeing technology, organic tillage, different crop instructions and much more, see our extensive, free "Organic Farming Handbook".

„100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

„100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Technical data

Technical data CHOPSTAR‑VERSO

Technical data special row-crop cultivatorCHOPSTAR-VERSO 3-60

  • Row spacing adjusted between 45 and 60 cm / 17.7" and 23.6"
  • Lower links guided on both sides
  • Rear mounted machines: autom. top link steering with spindle and high-gauge wheels
  • Adjustable retraction support on each parallelogram
  • Farmflex-feeler-wheels adjustable by spindles, ball bearing mounted, ø 300 mm/100 mm / 11.81"/3.94" wide
  • Robust, adjustable parallelogram
  • Vibrotine 40x12 with holder 35x11
  • Full hoe element with 3 vibrotines
  • Half hoeing element with 2 vibrotines

Type/working width

Transport width2 in

m / ft

 

Frame length in m / ft / mounting category

 

Tines

Hoe elementsfrom HP / kW

Weight approx.

  kg / lbs

Rear mount CHOPSTAR-VERSO     
ERV 3-row RIGID11.60 / 5.201.60 / 5.20 / II10430 / 22425 / 937
ERV 4-row RIGID12.00 / 6.602.00 / 6.60 / II13530 / 22500 / 1.102

ERV 5-row RIGID1

2.45 / 8.00

2.45 / 8.00 / II

16

6

30 / 22

575 / 1.268

ERV 6-row RIGID1

3.00 / 9.80 

3.00 / 9.80 / II

19

7

40 / 30

650 / 1.433

ERV 7-row HG33.00 / 9.803.35 / 11.00 / II2250 / 37905 / 1.995

ERV 8-row HG3

3.00 / 9.80

3.80 / 12.50 / II

25

9

60 / 44

980 / 2.161

ERV 12-row HG3

3.00 / 9.80

5.60 / 18.40 / II

37

13

70 / 51

1.360 / 2.998

ERV 15-row HG3,6

3.20 / 10.50

6.95 / 22.80 / II

46

16

90 / 66

1.750 / 3.858

ERV 18-row HG3,7

4.80 / 15.70

8.30 / 27.20 / III

55

19

130 / 96

2.090 / 4.608

ERV 18-row HG4

3.00 / 9.80

8.30 / 27.20 / II

55

19

130 / 96

2.280 / 5.027

ERV 24-row HG3,5

6.70 / 22.00

11.00 / 36.10 / III

73

25

160 / 118

2.650 / 5.842

ERV 24-row HG4

4.00 / 13.10 

11.00 / 36.10 / III

73

25

160 / 118

2.860 / 6.305

 

¹ with support - gauge wheels follow the tractor track

² depending on row spacing

³ hydraulic retraction – triple-frame

4 hydraulic retraction - double folding frame, 4 air wheels 18x8.50 instead of upper-link steering   Cat. II on 18 rows, Cat. III on 24 rows

5 4 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

6 2 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

7 4 gauge wheels instead of upper-link steering

 

Technical data special row-crop cultivatorCHOPSTAR-VERSO 5-80

  • Row distance variable adjustable between 60 and 80 cm / 23.6" and 31.5"
  • Lower links guided on both sides
  • Rear mounted machines: autom. top link steering with spindle and high gauge wheels
  • Adjustable retraction support on each parallelogram
  • Robust, adjustable parallelogram
  • Vibro tines 40x12, very well adjustable in position
  • Full hoeing element with 5 vibro tines
  • Half hoeing element with 3 vibro tines
  • Farmflex-feeler-wheels adjustable by spindles, ball bearing mounted, ø 300 mm/100 mm / 11.81"/3.94" wide
Type/working width

Transport width2 in

m / ft

Frame length in m / ft / mounting category

TinesHoe elements

from

HP / kW

Weight approx.

  kg / lbs

Rear mount CHOPSTAR-VERSO     
EMV 2-row RIGID11.60 / 5.201.60 / 5.20 / II11320 / 15455 / 1.003
EMV 4-row RIGID13.00 / 9.803.00 / 9.80 / II21540 / 30610 / 1.345

EMV 4-row HG3

3.00 / 9.80

3.00 / 9.80 / II

21

5

50 / 37

890 / 1.962

EMV 6-row RIGID1

4.40 / 14.40

4.40 / 14.40 / II

31

7

60 / 44

890 / 1.962

EMV 6-row HG33.00 / 9.80 4.40 / 14.40 / ||31760 / 441.080 / 2.381

EMV 7-row HG3

3.00 / 9.80

5.10 / 16.70 / II

36

8

70 / 51

1.170 / 2.579

EMV 8-row RIGID1

5.80 / 19.00

5.80 / 19.00 / II

41

9

80 / 59

1.090 / 2.403

EMV 8-row HG3

3.20 / 10.50 

5.80 / 19.00 / II

41

9

80 / 59

1.270 / 2.800

EMV 12-row HG3,7

4.80 / 15.70

8.60 / 28.20 / III

61

13

140 / 103

1.950 / 4.299

EMV 12-row HG4

3.00 / 9.80

8.60 / 28.20 / II

61

13

140 / 103

2.180 / 4.806

EMV 16-row HG3,7

6.90 / 22.60

11.40 / 37.40 / III

81

17

160 / 118

2.440 / 5.379

EMV 16-row HG4

4.00 / 13.10

11.40 / 37.40 / III

81

17

160 / 118

2.690 / 5.930

 

¹ with support - gauge wheels follow the tractor track

² depending on row spacing

³ hydraulic retraction – triple-frame

4 hydraulic retraction - double folding frame, 4 air wheels 18x8.50 instead of upper-link steering   Cat. II on 18 rows, Cat. III on 24 rows

5 4 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

6 2 gauge wheels and 1 rubber support wheel on each side wing instead of upper-link steering

7 4 gauge wheels instead of upper-link steering

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

 

Tines and sweeps
Depending on the machine, different tines and sweeps are mounted as standard.
Tines & sweeps overview

 

The following tines and sweeps are available:

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Tines and sweeps
Depending on the machine, different tines and sweeps are mounted as standard.
Tines & sweeps overview

 

The following tines and sweeps are available:

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Strong frame for high loads
Rigid or hydraulically folding machines have a strong frame, on which the parallelograms are mounted. The special Einböck-profile-frame allows a fast and simple assembly of the parallelograms. Because of the special frame-form the frame can stand a very high number of hoeing seasons without any problems. Furthermore, the row spacing can be adjusted quickly and infinitely variable.

  1. Frame for a front-mounted rigid machine
  2. Frame for a rear-mounted rigid machine with upper-link-steering
  3. Frame for a front-mounted machine, hydraulic folding
  4. Frame for a rear-mounted machine, hydraulic folding with upper-link steering
  5. Frame for a rear-mounted machine, with double folding for reduced transport width for large machines

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.)
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)

Hoeing frame in XXL version
Large machines with big working width (e.g. 72-row grain, 24-row beets, 16-row corn) are available in two different versions:

  1. Frame for rear-mounted machine with extra-wide middle-frame (transport width more than 3 m / 9.8 ft.)
  2. Frame for rear-mounted machine with trailing chassis (transport width not more than 3 m / 9.8 ft.)

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.8" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Upper link steering
An automatic upper link steering system is mounted as standard on rear-mounted hoeing machines. This ensures precise hoeing even on hilly conditions and curves. Hoeing on hills with an incline of up to 6 % is possible. Even in curves, the row-crop cultivator runs as close as possible behind the tractor track. Steering is done via gauge wheels. The implement does not need to be carried by the tractor. It is therefore used with position control and swinging lower links (approx. 7 cm / 2.8" each side). With the CHOPSTAR-TWIN, a ROW-GUARD sideshift frame with camera steering or hydraulic steering control is recommended so that the narrowest possible hoeing band can be achieved.

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Bolted or clamped mounting of the working tools
All working tools are bolted or clamped to the frame. 
This has the following advantages for the user: 

  • Always a tight fit (no getting lose) of the working tools, especially during working on the field
  • Set distances or working depth are precisely maintained 
  • No deflection of the connections and minimal wear and tear
  • Durable fixings/clamps withstand many hoeing seasons
  • Fixing of the tools without clearance what results e.g. in exact guidance of the sweeps
  • Allows very precise, infinitely variable adjustment

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Mounting of lower-links on 3-point hitch
Lower links are guided on both sides to provide high stability.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.

Set of wrenches
A set of wrenches, suitable for the screws which are mounted on the row-crop cultivator, are included in the standard delivery. So the few bolted holders can be adjusted easily. Bolted tine-holders, as well as holders for finger weeders, guarantee exact adjustment and precise hoeing.

Options

Options CHOPSTAR‑VERSO

  • Finger weeder
  • Trailed rotative weeder
  • Asymetric arrangement of parallelograms - technical supervision by Einböck recommended!
  • Height adjustable trailed weeder tines, mounted behind the hoe element
  • Different vibro tines, sweep widths and angle knives
  • Warning signs with holder and LED-lights
  • Hydraulic steering support for extremly hilly terrain
  • Hydraulic hand steering with seat
  • Camera steering system ROW-GUARD
  • Pneumatic seeding box P-BOX-STI
  • Further equipment individually adaptable

 

Detail Description

Hydraulic parallelogram lifting SECTION-CONTROL

The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.

 

More details, photos and videos about the SECTION-CONTROL

Hydraulic parallelogram lifting SECTION-CONTROL

The independent hydraulic lifting of each parallelogram has up to 35 cm / 13.80" lift height (depending on machine configuration and soil conditions) and is controllable by GPS or pressure switch.

 

More details, photos and videos about the SECTION-CONTROL

Inter row hoeing with finger & rotative weeder

The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".

 

More details, photos and videos about finger & rotative weeder

Inter row hoeing with finger & rotative weeder

The finger weeders (also called finger hoe) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing belt is worked and thus the crop is additionally "cleaned".

 

More details, photos and videos about finger & rotative weeder

Automatic sideshift frame with camera-guidance

A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Automatic sideshift frame with camera-guidance

A ROW-GUARD sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Large selection of different tines and sweeps

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Further details of tines & sweeps

 

Large selection of different tines and sweeps

  • Standard vibrotines with duckfoot sweeps
  • Einböck special vibrotines with duckfoot sweeps
  • Einböck special ultraflat sweeps
  • S-tines with duckfoot sweeps
  • Duckfoot sweeps made from carbide metal
  • Heaping sweeps & angle knives

Further details of tines & sweeps

 

Adjustable weeder tines
Adjustable weeder tines can be mounted for pulling weeds to the surface and ensure they dry out. They clean the roots of the weeds from soil and at the same time they slightly level the cultivated ares. The outer tines on the element can be exchanged to direct the earth flow either to or away from the crop row (principle of torsion hoe). This also enables a slight hilling effect.

Adjustable weeder tines
Adjustable weeder tines can be mounted for pulling weeds to the surface and ensure they dry out. They clean the roots of the weeds from soil and at the same time they slightly level the cultivated ares. The outer tines on the element can be exchanged to direct the earth flow either to or away from the crop row (principle of torsion hoe). This also enables a slight hilling effect.

Hydraulic upper-link steering support

The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Hydraulic upper-link steering support

The effect of the upper-link steering can be increased hydraulically. At the headland the cylinder always has to be switched to the other direction. It is recommended for slopes over 6 %.

Air wheel instead of Farmflex feeler wheel for sandy and light soil

For professional and precise work of the jockey wheel even on light soils, pneumatic wheels (instead of the standard Farmflex jockey wheels) are available as an option. These ensure that the desired working depth is maintained in very light or sandy soils thanks to a wider tread.

Air wheel instead of Farmflex feeler wheel for sandy and light soil

For professional and precise work of the jockey wheel even on light soils, pneumatic wheels (instead of the standard Farmflex jockey wheels) are available as an option. These ensure that the desired working depth is maintained in very light or sandy soils thanks to a wider tread.

Pneumatic seeding box
Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.

Pneumatic seeding box
Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.

Monitoring camera for row-crop cultivator

The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.

Monitoring camera for row-crop cultivator

The monitoring camera with a special lens for a narrow field of vision is designed for row-crop cultivators. It ensures convenient observation and control of the operation and the hoeing belt via a monitor in the tractor cab. The camera is mounted with a holder on the frame of the hoe.

Warning signs with LED-lights

For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)

Warning signs with LED-lights

For an extra charge, warning signs with LED-lights to the rear and front are available.
(symbol image - different variants depending on the design available)

 


Further tailor-made solutions
For our hoes there are a lot of additional options available. Depending on row distance or other options they might not be available or could not be combined with each other. In addition, there are more options available which are not mentioned here. When you let us know details of your request, we can check the possibility to fulfil your request. To be able to do so, we always need a filled in CHOPSTAR-CHECKLIST.


 

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.

Manual hydraulic steering
In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done. The hydraulic steering is not or only partially usable on machines with finger weeders and hydraulic lifting of the parallelograms.

Hilling discs
For some crops precise and effective hilling is necessary. This is possible with these hilling discs which can be very precisely adjusted. They cannot be combined with following weeder tines, rotative weeder elements or finger weeders.

Hilling discs
For some crops precise and effective hilling is necessary. This is possible with these hilling discs which can be very precisely adjusted. They cannot be combined with following weeder tines, rotative weeder elements or finger weeders.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR

In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Forms for CHOPSTAR/ROLLSTAR/HILLSTAR

In order to specify row-crop cultivators to special customer requirements we need detailed information (crops, row distance, SECTION-CONTROL, etc.) To provide all necessary information, please fill in the corresponding forms you can find at www.einboeck.at/en/forms.

Media

Media CHOPSTAR‑VERSO

Videos special row-crop cultivator CHOPSTAR-VERSO

Videos
special row-crop cultivator
CHOPSTAR-VERSO

Photos special row-crop cultivator CHOPSTAR-VERSO

Photos
special row-crop cultivator
CHOPSTAR-VERSO

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

News | Practice CHOPSTAR‑VERSO

Brochures CHOPSTAR-VERSO

The organic farming handbookThe organic
farming handbook
The FUSION-FARMING handbookThe FUSION-FARMING handbook
Set-up instruction row-crop cultivator CHOPSTAR with SECTION-CONTROLSet-up instruction
Row-crop cultivator CHOPSTAR with SECTION-CONTROL
Brochure Hoeing technologyBrochure
Hoeing technology
Data sheet hoeing technologyData sheet
hoeing technology
TOP

Contact

Kontaktanfrage - ausführlich EN

Formular
Name
Contact details
Upload