concept tined weederAEROSTAR

advantages tined weeder AEROSTAR

technical data tined weeder AEROSTAR

Lower link category I off 5 m / Kat. II off 6 m
Tines Ø 7 mm / 0.28“, 490 mm / 19.3“ long
No frame distortions
Central tine adjustment (5 positions)
Line spacing 2.5 cm / 1“ (center to center of tine)
Large bearing mounted rubber support wheels, distance approx. 1.36 - 1.45 m / 4.46 - 4.76 ft, Dimension 16x6.50/8 (18.8.50/8 on shear-retraction in the centre)
The side sections fold in automatically through parallel guidance (shear retraction - see page 11)
Parking support
For machines with shear-retraction two double acting hydr. valves are necessary
Transport width 1.50 m - 3.00 m / 4.9 ft - 9.8 ft

options tined weeder AEROSTAR

brochures tined weeder AEROSTAR

Downloads

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic mounts on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring coil of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the prong is not limited.

Exact tine position and movement

Type/ Working width cm / ft	Number of tines	Lower link category	Feelers	Folding action		Transport width/height in m - ft	Sectors	hp/kW	Weight approx. kg / lbs
Type/ Working width cm / ft	Number of tines	Lower link category	Feelers	rigid	hydr.	Transport width/height in m - ft	Sectors	hp/kW	Weight approx. kg / lbs
AEROSTAR 150 / 4.9	60	I/22	2	•		1,5/1,25 - 4.9/4.1	1	15/11	190 / 420
AEROSTAR 200 / 6.6	84	I/22	2	•		2/1,25 - 6.6/4.1	1	20/25	200 / 441
AEROSTAR 300 / 9.8	120	I/28	2	•		3/1,25 - 9.8/4.1	2	30/22	280 / 617
AEROSTAR 450 / 14.8	180	I/28	2		•	2,6/1,65 - 8.5/5.4	3	40/29	480 / 1.058
AEROSTAR 500 / 16.4	204	I/28	2		•	2,6/1,95 - 8.5/6.4	3	50/37	510 / 1.124
AEROSTAR 600 / 19.7	240	II/28	2		•	3/2,25 - 9.8/7.4	4	60/44	620 / 1.367
AEROSTAR 600 / 19.7	240	II/28	4		•	3/2,25 - 9.8/7.4	4	60/44	740 / 1.631
AEROSTAR 750 / 24.6	300	II/28	4		•	2,6/3,15 - 8.5/10.7	5	65/48	850 / 1.874
AEROSTAR 800 / 26.2	324	II/28	4		•	2,6/3,45 - 8.5/11.3	5	70/51	870 / 1.918
AEROSTAR 900 / 29.5 ¹	360	II/28	4		•	3/3,75 - 9.8/12.3	6	70/51	980 / 2160
AEROSTAR 900 / 29.5 ^2,3	360	II/28	4		•	3/3,30 - 9.8/10.8	6	80/59	1.170 / 2.580
AEROSTAR 1200 / 39.4 ^3,4	480	II/28	4		•	3/3,30 - 9.8/10.8	8	80/59	1.310 / 2.888
AEROSTAR 1500 / 49.2 ^3,4,6	600	II/28	4		•	3/4,25 - 9.8/13.9	10	90/66	1.600 / 3.527

¹ can be reduced to 6 m / 19.7 ft working width

² can be increased up to 12 m / 39.4 ft working width

³ shear retraction (see page 11)

⁴ can be reduced to 9 m / 29.5 ft respectively 12 m / 39.4 ft working width

⁵ can be increased up to 9 m / 29,5 ft working width

⁶ transport high 4,6 m

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

Additional grassland plates mounted on the tines
Additional control valve: for machines with shear-retraction needed, if tractor has only one double

videos tined weeder AEROSTAR

Increased tine vibration due to special plastic holders
One central lever per section to adjust the tine positions
Stable steel tube frame
Effective working method trough narrow line spacing
Big range of tines

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Increased tine vibration due to special plastic holders
One central lever per section to adjust the tine positions
Stable steel tube frame
Effective working method trough narrow line spacing
Big range of tines

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

AEROSTAR pull-type (18-24m)

Tines Ø 7 mm / 0.28“, 490 mm / 19.3“ long
Parking chocks
Front parking support
Suspended beams with hydraulic level control
Lower link category II and III
3 double acting hydraulic remotes necessary (1 of them with floating position)
Tire track width adjustable from 1,75 to 2,25 m / 68 to 88“ in 10-cm- / 4“-steps

Type/

Working width in cm / ft

Transport- (m / ft)

height length width

hp/kW

Number
of tines

Sections

Wheels

Weight
approx. kg / lbs

AEROSTAR 1800 / 59

2.95 / 9.7

6.50 / 21.3

3.00 / 9.8

120/88

720

3950 / 8708

AEROSTAR 2400 / 79

2.95 / 9.7

9.20 / 30.2

3.00 / 9.8

140/103

960

5460 / 12037

Hydraulic tine adjustment

The hydraulic tine adjustment will make using the AEROSTAR in changing soil conditions a more effective and productive tool. It is a preliminary stage to the AEROSTAR-EXACT, which is specially designed for these crops.

Hydraulic tine adjustment

photos tined weeder AEROSTAR

Download

High flexibility of working widths

The working widths range from 1,5-15 m / 4.9-49.2 ft (mounted) and from 18-24 m / 59-79 ft (trailed).

High flexibility of working widths

The working widths range from 1,5-15 m / 4.9-49.2 ft (mounted) and from 18-24 m / 59-79 ft (trailed).

Tine raising-bar

For cultivating rows of still very small plants Einböck has developed a tine raising-bar that will raise the tines above the rows so that the young plants are not damaged.

Tine raising-bar

For cultivating rows of still very small plants Einböck has developed a tine raising-bar that will raise the tines above the rows so that the young plants are not damaged.

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Supporting wheels for individual wheel base and ground elevations

The bearing mounted rubber support wheels are height-adjustable in half-hole increments. The wheel base between the middle wheels is 1.45 m / 4.76 ft. The adjustment can be extended infinitely variable up to 2 m / 6.6 ft. The support wheels take over the depth guidance and prevent the tines from invading too deep into the soil. Furthermore, the AEROSTAR adapts perfectly to uneven soil.

Supporting wheels for individual wheel base and ground elevations

Retro-fitting of a seeder like the P-BOX pneumatic seeder is possible at any time

Line spacing of 2,5 cm / 1”

The line spacing of 2,5 cm is very important for the quality of the operation result. 60 tines on 1.5 m / 4.9 ft working width make a static line distance of 2.5 cm / 1“. Only this distance will provide the desired effect of efficient weeding.

Line spacing of 2,5 cm / 1”

tine 380 mm / 15 “long, Ø 6,5 mm / 0.26 “

tine 490 / 13.9” mm long straight, Ø 8 mm / 0.32”

The right tine

tine 380 mm / 15 “long, Ø 6,5 mm / 0.26 “

The tine with a diameter of 6.5 mm / 0.26“ and a length of 380 mm / 15“ is particularly suitable for medium soil.

tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

This standard universal tine with a diameter of 7 mm / 0.28“ and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field. This tine is the first choice in small grain farming.

tine 490 mm 19.3” long, Ø 6,5 mm 0.26 “

The tine with a diameter of 6.5 mm / 0.26“ and a length of 490 mm / 19.3“ is designed for very light soil conditions.

tine 490 /19.3“ mm long, Ø 8 mm 0.32“

For tough soil conditions the tine with a diameter of 8 mm /0.32“ and a length of 490 mm / 19.3“ should be used. This tine is the most commonly used in grassland cultivation.

tine 490 / 13.9” mm long straight, Ø 8 mm / 0.32”

For rocky soil we recommend this straight tine so that the rocks are not moved to the surface. It has a diameter of 8 mm / 0.32“ and a length of 490 mm / 13.9“.

tine 600 mm 23.6“ long, Ø 7 0.28“ mm

This tine with a diameter of 7 mm / 0.28“ and a length of 600 mm / 23.6“ is well suited for special crops. It also compensates for uneven soil very well. This is the least aggressive tine offered.

Plastic fork support - no wear of steel tubes

The fork supports are made of hard plastic. Between connection and fork the field prevent the wear of the steel components.

Plastic fork support - no wear of steel tubes

The fork supports are made of hard plastic. Between connection and fork the field prevent the wear of the steel components.

AEROSTAR trailed (18-24m)

Wheels 13.0/55-16 instead of 10.0/75-15.3 AW (standard equipment at AEROSTAR 24 m / 79 ft)
Drawbar attachment ø 50 mm / 2“ via hydraulic parallelogram instead of lower link arms

Compact Retraction

Even a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be reduced to a transport width of only 3 m / 9.8 ft.

At machines with a working width of 4.5 to 9 m the lateral wings are folded upwards.
Tine weeders with 9 m working width have a shear retraction and a heavy-duty construction. Machines with 9 m are available with a normal share–system (with normal frame) and with a shear retraction (stronger construction).

Compact Retraction

Even a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be reduced to a transport width of only 3 m / 9.8 ft.

Stronger construction from 9 m working width

Larger working widths, especially with shear retraction, are made possible through a large angular support brace that will keep the frame from swinging even at higher speeds and aggressive tine position.

Stronger construction from 9 m working width

AEROSTAR trailed

adjustment with the suspend beams - system

Sturdy tube frame
A solid tube frame prevents the tine weeder from soaring.

Perfect adjustment with the suspend beams - system

All sections of the semi pull type version of the AEROSTAR are attached to suspend beams. These beams are hydraulically controlled (hydraulic level adjustment).

This suspended beam system can adapt to any unevenness in the terrain in an excellent way. On strongly crusted soil the double-acting cylinders of the beams will let you exert pressure on the sections.

Always 3 m transport width

All tine weeders achieve a transport width of only 3m.

Functionally positioned support wheels

At working widths of more than 18 m, the additional outer wheels do not have contact with the ground during folding into the transport position. And while upturning they cannot damage the crop.

Tined weeder AEROSTAR

perfect weeding effect
heavy-duty construction
optimal soil adaptation

boosts soil vitality and activity
big range of versatility
large variety of equipment