Tined weeder AEROSTAR - the classic tined weeder of EINBÖCK

Concepttined weederAEROSTAR

Advantagestined weederAEROSTAR

Technical datatined weederAEROSTAR

AEROSTAR

  • Lower links with quick coupling pendular axle (up to 6 m working width)
  • Mounting category CAT I up to 5 m / CAT II from 6 m
  • Tines ø 7 mm, length 490 mm, individually changeable
  • Tube frame section providing equal working pressure over the full width – 6 rows with central tine adjustment, per section
  • Line spacing 2,5 cm
  • Track width approx. 1,36 - 1,40 m
  • Large, bearing mounted rubber support wheels
  • The side sections fold in automatically through parallel guidance
  • Parking support (only for machines with hydraulic folding)
  • For machines with shear-retraction two double-acting hydr. remotes are required
  • Transport width 1,5 – 3 m (AEROSTAR 1800 - 6 m)
  • Sturdy tube frame, adjustable rubber support wheels and tine angle

 

AEROSTAR trailed

 

  • Tines ø 7 mm, length 490 mm, individually changeable
  • Suspended beams with hydraulic level control per section
  • Line spacing 2.5 cm
  • Tube frame section providing equal working pressure over the full width – 6 rows with central tine adjustment, per section
  • Requires three double-acting hydr. remotes (1x with floating position)
  • Exact hydraulic installation
  • Wheel chocks
  • Parking support
  • Lower links CAT II and III
  • Wheels 10.0/75-15.3 AW on AEROSTAR 1800
  • Wheels 13.0/55-16 AW on AEROSTAR 2400
  • Track width 1,75 - 2,25 m (adjustable in 10 cm steps)
  • Transport width 3 m

Optionstined weederAEROSTAR

  • Tine holder for row crops
  • Protection against loss in case of tine breakage, per section
  • For machines with shear-retraction working in light and sandy soils we recommend:
    Inside twin wheels 18x8.50-8
    Outside single wheels 18x8.50-8
  • Hydraulic tine adjustment
  • Hydraulic transport device
  • Spring-mounted front levelling plate with fixing of the section to the weeder fork
  • Extended infinitely variable adjustment of the track width (up to 2,15 m / 7,05 ft)
  • Section extensions 30 cm
  • Warning signs with holder and LED-lights
  • Pneumatic seeding box P-BOX
Brochures tined weeder AEROSTAR
Brochures tined weeder AEROSTAR
Brochures tined weeder AEROSTAR
Downloads Downloads

Direct spring-loaded tines
All Einböck-Tined weeders are equipped with direct spring-loaded tines.

These have many advantages:

  • Tines swivel - ensuring effective weed control also in the row without harming the crop
  • Highest adjustment range of the tine pressure on the market - enables gentle blind weeding  and aggressive crust breaking
  • Vibration ensures self-cleaning of tines - guarantees operation without clogging
  • Weeds are uprooted from soil and dirt - fast drying out prevents re-growth
  • State of the art tine guidance system - ensures weed control over the full surface

Direct spring-loaded tines
All Einböck-Tined weeders are equipped with direct spring-loaded tines.

These have many advantages:

  • Tines swivel - ensuring effective weed control also in the row without harming the crop
  • Highest adjustment range of the tine pressure on the market - enables gentle blind weeding  and aggressive crust breaking
  • Vibration ensures self-cleaning of tines - guarantees operation without clogging
  • Weeds are uprooted from soil and dirt - fast drying out prevents re-growth
  • State of the art tine guidance system - ensures weed control over the full surface

Type/

Working width cm / ft

SectionsWheels

Tines

from hp/kW

Weight

approx. kg / lbs

RIGID, not fondable     

AEROSTAR 150 / 4.9

1 x 1,52

60

15/11

190 / 420

AEROSTAR 210 / 6.6

1 x 2,12

84

20/25

200 / 441

AEROSTAR 300 / 9.8

2 x 1,52

120

30/22

280 / 617

Hydraulic folding     

AEROSTAR 450 / 14.8

3 x 1,52

180

40/29

500 / 1002

AEROSTAR 510 / 16.4

1 x 2,1 / 2 x 1,52

204

50/37

520 / 1146

AEROSTAR 600 / 19.7

4 x 1,52

240

60/44

620 / 1367

AEROSTAR 600 / 19.7 3

4 x 1,54

240

60/44

740 / 1631

AEROSTAR 750 / 24.6

5 x 1,54

300

65/48

850 / 1874

AEROSTAR 810 / 26.2

4 x 1,5 / 1 x 2,14

324

70/51

870 / 1918

AEROSTAR 900 / 29.5 N 4

6 x 1,54

360

70/51

980 / 2161

AEROSTAR 900 / 29.5 1

6 x 1,54

360

80/59

1 170 / 2579

AEROSTAR 1200 / 39.4 1

8 x 1,54

480

90/66

1 310 / 2888
AEROSTAR 1350 / 44.2 1,29 x 1,54540110/811 350 / 2976

AEROSTAR 1500 / 49.2 1,2

10 x 1,54

600

130/95

1 600 / 3527
AEROSTAR 1800 / 59.0 1,212 x 1,56720180/132 490 / 5490

 

1     with shear-retraction

2     transport height approx. 4,6 m - hydr. transport lock

3     can be extended to 9 m

4     can be reduced to 6 m

 

Type/
Working width cm / ft
SectionsWheelsTinesfrom
hp/kW
Weight
approx. kg / lbs
AEROSTAR 1800 / 593 x 1,8 / 6 x 2,14720180/1333.950 / 8708
AEROSTAR 2400 / 793 x 1,8 / 6 x 2,1 / 4 x 1,56960200/1475.460 / 12037

 

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

 

Videos tined weeder AEROSTAR

Videos tined weeder AEROSTAR

  1. Increased tine vibration due to special plastic holders
  2. One central lever per section to adjust the tine position
  3. Solid steel tube frame
  4. Effective operation because of narrow line spacing of 2.5 cm
  5. Wide range of tines as options = the right tines for every job
  6. Large frame clearance

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

  1. Increased tine vibration due to special plastic holders
  2. One central lever per section to adjust the tine position
  3. Solid steel tube frame
  4. Effective operation because of narrow line spacing of 2.5 cm
  5. Wide range of tines as options = the right tines for every job
  6. Large frame clearance

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Detailed description

Line spacing of 2.5 cm / 0,9"
The line spacing  has a decisive influence on the working effect and quality of the operation. With a 6-row arrangement of 60 tines per 1.5 m / 59" field, an effective line spacing of 2.50 cm / 0,9" is achieved. The basic requirement for efficient weed control is the smallest possible line spacing. 

Line spacing of 2.5 cm / 0,9"
The line spacing  has a decisive influence on the working effect and quality of the operation. With a 6-row arrangement of 60 tines per 1.5 m / 59" field, an effective line spacing of 2.50 cm / 0,9" is achieved. The basic requirement for efficient weed control is the smallest possible line spacing. 

 

The right tine

tine 380 mm / 15 “long, Ø 6,5 mm / 0.26 “

The tine with a diameter of 6.5 mm / 0.26“ and a length of 380 mm / 15“ is particularly suitable for medium soil.

 

tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

This standard universal tine with a diameter of 7 mm / 0.28“  and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field. This tine is the first choice in small grain farming.

 

tine 490 mm 19.3” long, Ø 6,5 mm 0.26 “

The tine with a diameter of 6.5 mm / 0.26“ and a length of 490 mm / 19.3“ is designed for very light soil conditions.

 

tine 490 /19.3“ mm long, Ø 8 mm 0.32“

For tough soil conditions the tine with a diameter of 8 mm /0.32“ and a length of 490 mm / 19.3“ should be used. This tine is the most commonly used in grassland cultivation.

 

tine 490 / 13.9” mm long straight, Ø 8 mm / 0.32”

For rocky soil we recommend this straight tine so that the rocks are not moved to the surface. It has a diameter of 8 mm / 0.32“ and a length of 490 mm / 13.9“.

 

tine 600 mm 23.6“ long, Ø 7 0.28“ mm

This tine (standard for AEROSTAR-EXACT) with a diameter of 7 mm / 0.28“ and a length of 600 mm / 23.6“ is well suited for special crops. It also compensates for uneven soil very well.

DetailDescription

 

Precise tine position and tine movement
The tines on the weeder are fixed to the sections by plastic holders to prevent them from twisting so the tine is alignmented in the exactly working direction.
The spring coil of the tine is mounted below the holder to ensure free tine movement and vibration out of the spring coil. As movement of the tine is not limited or restricted, breakage is very unlikely.

Precise tine position and tine movement
The tines on the weeder are fixed to the sections by plastic holders to prevent them from twisting so the tine is alignmented in the exactly working direction.
The spring coil of the tine is mounted below the holder to ensure free tine movement and vibration out of the spring coil. As movement of the tine is not limited or restricted, breakage is very unlikely.

Hydraulic tine adjustment
The AEROSTAR tined weeder can be equipped with hydraulic tine adjustment. The hydraulic tine adjustment ensures equal aggressivity over the full working widht in changing soil conditions and uneven fields. It is a preliminary stage to the AEROSTAR-EXACT, which is designed for special crops (and e.g. blind weeding).

Hydraulic tine adjustment
The AEROSTAR tined weeder can be equipped with hydraulic tine adjustment. The hydraulic tine adjustment ensures equal aggressivity over the full working widht in changing soil conditions and uneven fields. It is a preliminary stage to the AEROSTAR-EXACT, which is designed for special crops (and e.g. blind weeding).

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

This standard universal tine with a diameter of 7 mm / 0.28“  and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field. This tine is the first choice in small grain farming.

tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

This standard universal tine with a diameter of 7 mm / 0.28“  and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field. This tine is the first choice in small grain farming.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, even in higher working speeds. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems. 

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, even in higher working speeds. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems. 

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”. A hydraulic adjustment of the tines is also available.

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”. A hydraulic adjustment of the tines is also available.

Warning signs with holder and LED-lights
These are available to the front as well as to the rear.
(Symbol image - divers variants depending on the design)

Warning signs with holder and LED-lights
These are available to the front as well as to the rear.
(Symbol image - divers variants depending on the design)

Large frame clearance
A large frame clearance is guaranteed by the position of the sections and the frame. This ensures operation without damaging the crop even when the plants are higher.

Large frame clearance
A large frame clearance is guaranteed by the position of the sections and the frame. This ensures operation without damaging the crop even when the plants are higher.

Support wheels for individual track spacing and unevenness
The ball-bearing mounted support wheels are adjustable in in height in a half-breadboard. As an option the wheel base of the support wheels is infinitely variable up to 2,15 m. The support wheels take over the depth control and prevent the spring tines from penetrating too deeply in light soil conditions. The AEROSTAR therefore adapts perfectly to uneven ground.

 

Support wheels for individual track spacing and unevenness
The ball-bearing mounted support wheels are adjustable in in height in a half-breadboard. As an option the wheel base of the support wheels is infinitely variable up to 2,15 m. The support wheels take over the depth control and prevent the spring tines from penetrating too deeply in light soil conditions. The AEROSTAR therefore adapts perfectly to uneven ground.

 

Pneumatic seeding box P-BOX
Two different pneumatic seeding boxes are available for easy distribution of cover crops or for re-seeding. The P-BOX-STI with electric drive (picture) or P-BOX-MD with mechanical drive (picture) of the seeding roller.

Pneumatic seeding box P-BOX
Two different pneumatic seeding boxes are available for easy distribution of cover crops or for re-seeding. The P-BOX-STI with electric drive (picture) or P-BOX-MD with mechanical drive (picture) of the seeding roller.

Plastic support on U-frame - no wear and tear on steel tubes
On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

Plastic support on U-frame - no wear and tear on steel tubes
On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

AEROSTAR trailed

  • Drawbar mounting with ø 50 mm pin and hydr. lifting instead of lower link mounting
  • Hydraulic tine adjustment - position fixed with bolts (per section)
  • Wide wheels
  • Support wheels for sensitive or blind weeding (1x per section)
  • Pneumatic trailer brake
  • Warning signs with holder and LED-lights

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be folded to a transport width of only 3 m / 9.8 ft (except 18 m machines). Machines with a working width of 4.5 to 9 m the side wings of the mainframe are folded upwards for transport. 9 m machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m this is standard. On all versions a hitching very closely to the tractor is ensured.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be folded to a transport width of only 3 m / 9.8 ft (except 18 m machines). Machines with a working width of 4.5 to 9 m the side wings of the mainframe are folded upwards for transport. 9 m machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m this is standard. On all versions a hitching very closely to the tractor is ensured.

Simple mounting of a seeding box
The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.

Simple mounting of a seeding box
The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.

Stronger construction from 9 m working width
A larger working width means greater forces acting on a machine. The triangular bracing on machines with double folding prevents the side wings from swinging and rocking even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

Stronger construction from 9 m working width
A larger working width means greater forces acting on a machine. The triangular bracing on machines with double folding prevents the side wings from swinging and rocking even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

AEROSTAR trailed

Sturdy tube frame
A solid tube frame prevents the tine weeder from swinging and ensures a long life of the harrow.
 

Sturdy tube frame
A solid tube frame prevents the tine weeder from swinging and ensures a long life of the harrow.
 

Perfect adjustment with the suspend beams – system
All sections of the semi pull type version of the AEROSTAR are attached to suspend beams. These beams are hydraulically controlled (hydraulic level adjustment). This suspended beam system can adapt to uneven terrain in an excellent way. On soil with very hard crust the double-acting cylinders of the beams will allow you to put additional pressure on the sections.

Perfect adjustment with the suspend beams – system
All sections of the semi pull type version of the AEROSTAR are attached to suspend beams. These beams are hydraulically controlled (hydraulic level adjustment). This suspended beam system can adapt to uneven terrain in an excellent way. On soil with very hard crust the double-acting cylinders of the beams will allow you to put additional pressure on the sections.

Always 3 m transport width
All tine weeders achieve a transport width of only 3m.

Always 3 m transport width
All tine weeders achieve a transport width of only 3m.

Practical turning on the headlands by simple lifting mechanism
At working widths of more than 18 m, the additional outer wheels do not have contact with the ground during folding into the transport position. And while upturning they cannot damage the crop. 
 

Practical turning on the headlands by simple lifting mechanism
At working widths of more than 18 m, the additional outer wheels do not have contact with the ground during folding into the transport position. And while upturning they cannot damage the crop. 
 

Tined weeder AEROSTAR

  • perfect weeding effect
  • heavy-duty construction
  • optimal soil adaptation
  • boosts soil vitality and activity
  • big range of versatility
  • large variety of equipment

Tined weeder AEROSTAR

Tined weeder AEROSTAR

  • perfect weeding effect
  • heavy-duty construction
  • optimal soil adaptation
  • boosts soil vitality and activity
  • big range of versatility
  • large variety of equipment

Worldwide thousandfold proven - the classic weeder AEROSTAR has become an integral part of mechanical crop protection. For over 3 decades the weeder has continuously been developed and so it has become an excellent alternative for chemical weed control. The moving field sections of the AEROSTAR adapt perfectly to the various soil conditions, regardless of the working width. This guarantees an optimum working result. For sensitive, special crops or blind weeding the AEROSTAR can be equipped with extra long tines and a hydraulic tine adjustment. It then represents a preliminary stage to the AEROSTAR-EXACT, which has been further optimised in this respect.

 

Interested in the follow-up model of the AEROSTAR - click here for information about the AEROSTAR-EXACT!

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP