Grassland seeder PNEUMATICSTAR - also as underseeding machine | EINBÖCK

Grassland seeder PNEUMATICSTAR-MD

  • Under- or reseeding with the P-BOX-MD
  • Promotes aeration of the soil
  • For optimum feed quality
  • Closing gaps in the grass turf
  • Perfect soil adaption
  • Increases earnings

Grassland seeder PNEUMATICSTAR-MD

Grassland seeder
PNEUMATICSTAR-MD

  • Under- or reseeding with the P-BOX-MD
  • Promotes aeration of the soil
  • For optimum feed quality
  • Closing gaps in the grass turf
  • Perfect soil adaption
  • Increases earnings

The PNEUMATICSTAR is designed for grassland care, seeding, under- and reseeding. The seeding roller is driven mechanically via the support wheel or is electronically controlled by different sensors. It is designed with steady frames and, depending on the working width, the frame is rigid or mechanic or hydraulic folding. Using high-quality materials and through the special, solid construction you can put additional pressure on the 6-row tine sections in hard soil conditions.

 

There are 2 versions of the PNEUMATICSTAR available. MD Version with mechanical drive of the seeding roller and STI with electronic drive of the seeding roller, controlled by the STI terminal.

 

Simply sow electronically with the PNEUMATICSTAR-STI!

Under- and Reseeding with a stronger frame construction: PNEUMATICSTAR-PRO-MD!

ConceptConcept
AdvantagesAdvantages
Technical dataTechnical data
OptionsOptions
MediaMedia
News|PraxisNews | Practice
ProspekteBrochures
Concept

Concept PNEUMATICSTAR‑MD

  1. P-BOX-MD for optimal and accurate seeding
  2. The seeding shaft is driven mechanically via a flexible shaft on a support wheel on the implement
  3. Effective operation due to narrow line spacing of exact 2.5 cm / 1"
  4. Large selection of tines as options = the right tine for every job
  5. Central adjustment of the tine position per field (optional hydraulic adjustment)
  6. Steps for easy and safe filling of the seeding box
  7. No following crumblers
  8. Optionally available front levelling plates

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Advantages

Advantages PNEUMATICSTAR‑MD

Great flexibility of use

Just a few examples of the various ways you can use the machines: re- or new seeding in grassland (1), underseeding in cereals (2) or corn (3), etc.

Great flexibility of use

Just a few examples of the various ways you can use the machines: re- or new seeding in grassland (1), underseeding in cereals (2) or corn (3), etc.

Perfect for under- or reseeding

The pneumatic seeders with integrated stirring-shaft are designed in such a way that each sowing tube has its own seeding wheel section to achieve perfect dosing and uniform output. For working widths wider than 6 m / 19.70 ft. the seeding hoses are split to reach 12 or 16 outlets. Machines up to 6 m / 19.70 ft. working width are standard equipped with an electric double fan. Bigger machines work with a mechanical fan as standard. A hydraulic fan is available as an option.

Perfect for under- or reseeding

The pneumatic seeders with integrated stirring-shaft are designed in such a way that each sowing tube has its own seeding wheel section to achieve perfect dosing and uniform output. For working widths wider than 6 m / 19.70 ft. the seeding hoses are split to reach 12 or 16 outlets. Machines up to 6 m / 19.70 ft. working width are standard equipped with an electric double fan. Bigger machines work with a mechanical fan as standard. A hydraulic fan is available as an option.

Driven by a rubber wheel

On the grassland weeder PNEUMATICSTAR-MD the pneumatic seeding box P-BOX-MD is mounted. On the P-BOX-MD the seeding roller is mechanically driven via a flexible shaft, which transfers the actual ground speed from a ground wheel to the seeding roller. The seeds are distributed pneumatically via hoses to the deflector plates, which spread the seeds evenly. The seeding rate is adjusted via a lever which is mounted on the stepless gearbox of the P-BOX-MD.
 

Driven by a rubber wheel

On the grassland weeder PNEUMATICSTAR-MD the pneumatic seeding box P-BOX-MD is mounted. On the P-BOX-MD the seeding roller is mechanically driven via a flexible shaft, which transfers the actual ground speed from a ground wheel to the seeding roller. The seeds are distributed pneumatically via hoses to the deflector plates, which spread the seeds evenly. The seeding rate is adjusted via a lever which is mounted on the stepless gearbox of the P-BOX-MD.
 

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

Deflector plates are mounted centrally on the tine sections

The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Deflector plates are mounted centrally on the tine sections

The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Exact line spacing of the tines of 2.5 cm / 1”

The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.

Exact line spacing of the tines of 2.5 cm / 1”

The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The  spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The  spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.

Spring tines adjustable with a central handle

The aggressivity of the spring tines can be adjusted with a central handle per section in five different positions. The positions can vary from "dragging" to “tip forward of the bend”.

Spring tines adjustable with a central handle

The aggressivity of the spring tines can be adjusted with a central handle per section in five different positions. The positions can vary from "dragging" to “tip forward of the bend”.

Guaranteed equal tine aggressivity over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.

Guaranteed equal tine aggressivity over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be folded to a transport width of only 3 m / 9.8 ft. Machines with a working width of 4.5 to 9 m the side wings of the main frame are folded upwards for transport. 9 m / 29.5 ft. machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m / 39.4 ft. this is standard. On all versions a hitching very closely to the tractor is ensured.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft and 15 m / 49.2 ft can be folded to a transport width of only 3 m / 9.8 ft. Machines with a working width of 4.5 to 9 m the side wings of the main frame are folded upwards for transport. 9 m / 29.5 ft. machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m / 39.4 ft. this is standard. On all versions a hitching very closely to the tractor is ensured.

Stronger construction from 9 m / 29.5 ft. working width

A larger working width means greater forces acting on a machine. The triangular bracing on machines with shear folding prevents the side wings from swinging and jumping even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

Stronger construction from 9 m / 29.5 ft. working width

A larger working width means greater forces acting on a machine. The triangular bracing on machines with shear folding prevents the side wings from swinging and jumping even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

 „100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

     „100 % made by EINBÖCK in AUSTRIA“

    • In-house development from the idea to serial production
      We have over 85 years experience in designing of agricultural machinery.
    • From practitioner for practitioner 
      75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
    • Suppliers from the region and Central Europe
      Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
      • Manufacturing exclusively in Dorf an der Pram in Upper Austria
        Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
      • Practical testing of all machines on our own test fields
        Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
      • After-sales service
        A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
      • Manufacturing exclusively in Dorf an der Pram in Upper Austria
        Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
      • Practical testing of all machines on our own test fields
        Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
      • After-sales service
        A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
      Technical data

      Technical data PNEUMATICSTAR‑MD

      • Lower links, quick coupling pendular axle / up to 6 m / 19.7 ft.
      • Mounting category CAT I up to 5 m / 16.4 ft / CAT II from 6 m / 19.7 ft.
      • Tines Ø 7 mm / 0.28", length 490 mm / 19.3", individually changeable
      • Line spacing 2.5 cm / 1"
      • Tine tube with anti-rotation device
      • Parking support (from 3 m / 9.8 ft. working width)
      • Pneumatic seeder P-BOX-MD with mechanic drive and separate seeding roller section per hose
      • Electric fan 12 volt - up to 6 m / 19.7 ft. working width
      • Mechanical fan with PTO-shaft - for 9 m / 29.5 ft and 12 m / 39.4 ft. working width
      • One seeding roller with fine and one with coarse toothing
      • Seeding roller can be changed without tools
      • Tank made from sheet steel
      • Calibration plate + calibration pan
      • Tank volume 300 litres with tank inspection glass + drainage opening (for PNEUMATICSTAR 600 NR = 500 l)
      • Adjustment of the seeding rate via a flexible cable, driven by a ground wheel through a stepless gearbox
      • Specially designed distribution plates with splash guard
      • Steps for filling
      • Transport width 2 m – 3 m (6.6 ft. - 9.8 ft.)
      Type
      Working width cm
      TinesFeeler wheelsDeflector platesSectionsSeeding rollersfrom
      HP/kW
      Weight kg
      approx.

      PNEUMATICSTAR-MD 200 1

      84

      2

      8

      1

      B,E

      25/18

      260

      PNEUMATICSTAR-MD 300 1

      120

      2

      8

      2

      B,E

      30/22

      350

      PNEUMATICSTAR-MD 500 2

      204

      4

      8

      3

      C,E

      50/37

      580

      PNEUMATICSTAR-MD 600 2

      240

      4

      8

      4

      C,E

      60/44

      690

      PNEUMATICSTAR-MD 600 SR 2

      240

      4

      8

      4

      C,E

      60/44

      920

      PNEUMATICSTAR-MD 600 NR 2

      240

      4

      8

      4

      C,F

      80/59

      1 100

      PNEUMATICSTAR-MD 900 3,4

      360

      4

      12

      6

      G,H

      90/66

      1 400

      PNEUMATICSTAR-MD 900 SR 3

      360

      4

      12

      6

      G,H

      90/66

      1 490

      PNEUMATICSTAR-MD 1200 3

      480

      4

      16

      8

      D,F

      100/74

      1 650

      PNEUMATICSTAR-MD 1200 SR 3

      480

      4

      16

      8

      D,F

      100/74

      1 760

       

      1 rigid frame, not foldable
      2 hydraulic folding
      3 hydraulic folding with double folding
      4 can be extended up to 12 m / 39.40 ft.
      SR = heavy frame (for contractors or communities)

      NR = with mechanical fan, also suitable for the distribution of fertilizer (seeding unit as well as distribution plates made from stainless steel), stronger gearbox, no European folding - frame SR version (heavy frame), 500 l tank standard

       

      Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

       

      Increased vibration-effect due to special tine holder

      Increased vibration-effect due to special tine holder

      Tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

      This standard universal tine with a diameter of 7 mm / 0.28“ and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field.

      Tine 490 mm / 19.3” long, Ø 7 mm 0.28 “

      This standard universal tine with a diameter of 7 mm / 0.28“ and a length of 490 mm / 19.3“ is ideal for medium to heavy soil conditions. This tine length can also compensate uneven spots in the field.

      Rubber support wheels for gently operation

      Depending on the working width, the grassland- and reseeding weeders are guided by two or four rubber support wheels. Via the support wheels the working depth of the tines is regulated. They are height-adjustable in the half-hole grid.

      Rubber support wheels for gently operation

      Depending on the working width, the grassland- and reseeding weeders are guided by two or four rubber support wheels. Via the support wheels the working depth of the tines is regulated. They are height-adjustable in the half-hole grid.

      Stop bar for perfect adoption to the surface

      By taking away or demounting the stop bar on the wing (only on machines without shear folding) the machine follows the contours of the land surface perfectly.

      Stop bar for perfect adoption to the surface

      By taking away or demounting the stop bar on the wing (only on machines without shear folding) the machine follows the contours of the land surface perfectly.

      Mechanical locking in transport position
      Frames on machines without shear folding lock mechanically in transport position. The lock is released via a pulling-rope.
      (only on machines without shear folding)

      Mechanical locking in transport position
      Frames on machines without shear folding lock mechanically in transport position. The lock is released via a pulling-rope.
      (only on machines without shear folding)

      Plastic support on U-frame
      On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

      Plastic support on U-frame
      On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

      Options

      Options PNEUMATICSTAR‑MD

      • Tines 490 mm / 19.3 long, ø 8 mm / 0.31"
      • Tines 490 mm / 19.3 long STRAIGHT, ø 8 mm / 0.31"
      • Tines 490 mm / 19.3 long, ø 10 mm / 0.39" (only for version SR)
      • Hydraulic transport lock
      • Tine loss protection
      • Hydraulic tine adjustment
      • Adjustable spring-mounted front levelling plate
      • Retaining plate
      • Mechanical jogging unit
      • Electronic hectare counter
      • 500 litre tank
      • Plastic tank instead of the standard steel tank
      • Mechanical fan
      • Hydraulic fan
      • Electric adjustment of seeding quantity
      • Airflow monitoring
      • Alarm when seeding box is getting empty
      • Seeding unit made from stainless steel
      • Deflector plate made from stainless steel
      • Warning signs with holder and LED-lights

       

      Detailed Description

      Hydraulic tine adjustment – perfect in changing soil conditions

      The hydraulic tine adjustment makes adjustment to the GRASS-MANAGER in changing soil conditions easier. Furthermore, folding to the transport position is more convenient as you can easily put the tines into a flat position. The hydraulic tine adjustment can be retrofitted any time.

      Hydraulic tine adjustment – perfect in changing soil conditions

      The hydraulic tine adjustment makes adjustment to the GRASS-MANAGER in changing soil conditions easier. Furthermore, folding to the transport position is more convenient as you can easily put the tines into a flat position. The hydraulic tine adjustment can be retrofitted any time.

      Options P-BOX-MD
      For ideal options for the seeding unit P-BOX-MD, like different fan systems or 500 l tank, click here.

      Options P-BOX-MD
      For ideal options for the seeding unit P-BOX-MD, like different fan systems or 500 l tank, click here.

      Levelling plate for excellent distribution and levelling of mole hills

      In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of mole hills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment)

      Levelling plate for excellent distribution and levelling of mole hills

      In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of mole hills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment)

      Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine

      (only available for heavy frame SR)
      For heavily felted grassland or in medium to heavy soil conditions, theses tines  with a diameter of 10 mm / 0.39“ and a length of 490 mm / 19.3“ should be used. These tines are ideal to fight rough meadow-grass in summer. The following reseeding indicates an increase in basic feed quality.

      Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine

      (only available for heavy frame SR)
      For heavily felted grassland or in medium to heavy soil conditions, theses tines  with a diameter of 10 mm / 0.39“ and a length of 490 mm / 19.3“ should be used. These tines are ideal to fight rough meadow-grass in summer. The following reseeding indicates an increase in basic feed quality.

      Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“

      In middle or heavy soil, the tines with 8 mm / 0.31” diameter and 490 mm / 19.3” length should be used. These tines are the most common ones in grassland care.

      Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“

      In middle or heavy soil, the tines with 8 mm / 0.31” diameter and 490 mm / 19.3” length should be used. These tines are the most common ones in grassland care.

      Tine 490 mm / 13.9” long STRAIGHT, Ø 8 mm / 0.31”
      For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 8 mm / 0.31” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet grassland.

      Tine 490 mm / 13.9” long STRAIGHT, Ø 8 mm / 0.31”
      For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 8 mm / 0.31” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet grassland.

      Warning signs with LED-lights
      For this grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

      Warning signs with LED-lights
      For this grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

      Plastic tank
      Instead of the standard steel tank, a 265 l plastic tank can be installed. This corrosion-resistant design plastic tank is made of the highest quality materials and is thus extremely durable and unbreakable. 

      Plastic tank
      Instead of the standard steel tank, a 265 l plastic tank can be installed. This corrosion-resistant design plastic tank is made of the highest quality materials and is thus extremely durable and unbreakable. 

      Media

      Media PNEUMATICSTAR‑MD

      Video grassland seeder PNEUMATICSTAR-MD and -STI

      Video grassland seeder
      PNEUMATICSTAR-MD
      and -STI

      Photos grassland seeder PNEUMATICTAR-MD

      Photos grassland seeder
      PNEUMATICTAR-MD

       

      You can’t find the right photo?

      We have a big range of photos in various perspectives and cultures. Contact us here!

      Brochures PNEUMATICSTAR-MD

      The grassland care handbookThe Grassland
      Care Handbook
      Set-up instruction grassland care GRASS-MANAGER-(PRO) & PNEUMATICSTAR-(PRO)Set-up instruction
      Grassland care
      GRASS-MANAGER-(PRO) &
      PNEUMATICSTAR-(PRO)
      Brochure Grassland careBrochure
      Grassland care
      Data sheet grassland technologyData sheet
      grassland technology
      TOP

      Contact

      Kontaktanfrage - ausführlich

      Formular
      Name
      Contact details
      Upload