grassland reseeding machine PNEUMATICSTAR-PRO-MD - as machine for grassland rehabilitation| EINBÖCK

Conceptgrassland seederPNEUMATICSTAR-PRO-MD

Advantagesgrassland seederPNEUMATICSTAR-PRO-MD

Technical datagrassland weederPNEUMATICSTAR-PRO-MD

  • Lower and top links are provided with hardened bushings - mounting category II
  • Tines Ø 8 mm, 490 mm long
  • Frame hydraulically foldable
  • The frame ensures optiomal guidance of the levelling boards above the soil surface
  • Heavy, spring suspended front levelling bar (triangular) working in front of the support wheels
  • Line spacing 2.5 cm
  • Track width 200 cm
  • Parking support with filling steps
  • Airseeder with stirring shaft and separate seeding roller section per hose
  • Electric fan 12 volts
  • Electric cable with large diameter and control unit
  • One Seeding roller with fine and one with coarse toothing
  • Seeding roller can be changed without tools
  • Tank made from sheet steel
  • Calibration plate + calibration pan
  • Tank volume 300 l with monitoring window + opening to fully empty the box
  • Drive of seeding roller through bottom drive and variable adjustable oil bath gearbox
  • Specially designed distribution plates with splash guard
  • Transport width 3.00 m

Optionsgrassland seederPNEUMATICSTAR-PRO-MD

  • Protection against loss in case of tine breakage
  • Retaining plate
  • Mechanical jogging
  • Hectare counter electronic
  • 500 l tank
  • Mechanical fan
  • Hydraulic fan
  • Electric adjustment of seeding quantity
  • Airflow monitoring
  • Tank level sensor
  • P-BOX MD - Seeding unit made from stainless steel
  • Deflector plate made from stainless steel
  • Warning signs with holder and LED-lights

Heavy front levelling plante for perfect levelling of mole hills
A heavy triangular levelling plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open. 

Heavy front levelling plante for perfect levelling of mole hills
A heavy triangular levelling plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open. 

Type/

Working width cm

Tines

Front levelling plates

Feeler wheels

Deflector platesSections

Seeding rollers 6

from HP/kW

Weight
kg approx.

With front levelling plates - with seeding box      

PNEUMATICSTAR-PRO-MD 300 1,3

120

2

4

8

2

B,E

60/44

790

PNEUMATICSTAR-PRO-MD 600 1,4

240

4

6

8

4

C,E

80/59

1 370

PNEUMATICSTAR-PRO-MD 1200 2,5

480

8

8

16

8

D,F

170/125

4 440

Without front levelling plates - with seeding box     

PNEUMATICSTAR-PRO-MD 300 1,3

120-482B,E60/44690

PNEUMATICSTAR-PRO-MD 600 1,4

240-684C,E80/591 200

PNEUMATICSTAR-PRO-MD 1200 2,5

480-8168D,F170/1254 280

 

Abbr.Description
1Electric double fan 12 Volt
2

hydraulic fan with oil pressure manometer (requirements: pressure free return line, maximum capacity of the oil pump must not exceed 50 litres;

recommendation: independent hydraulic valve or load sensing system)

31 double-acting hydraulic valve necessary
41 double-acting and 1 single-acting hydraulic valve necessary
53 double-acting hydraulic valves and 1 single-acting hydraulic valve with pressure free return line necessary
6see photo of the seeding rollers on concept of P-BOX-STI

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

 

Detail Description:

Hydraulic pressure regulation
The hydraulic pressure on the parallelograms can be adjusted from the cab via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggresivity is identical on each section over the full working
width. The turf is opened - this helps to control the rough stalked meadow grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly even in uneven terrain.

Hydraulic pressure regulation
The hydraulic pressure on the parallelograms can be adjusted from the cab via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggresivity is identical on each section over the full working
width. The turf is opened - this helps to control the rough stalked meadow grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly even in uneven terrain.

Warning signs with holder and LED-lights
For the grassland seeding with the PNEUMATICSTAR-PRO-MD warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Warning signs with holder and LED-lights
For the grassland seeding with the PNEUMATICSTAR-PRO-MD warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

 

 

Detail Description:

Tine 490 mm/19.3“ long, Ø 8 mm/0.31“
In medium or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones for grassland care.

Tine 490 mm/19.3“ long, Ø 8 mm/0.31“
In medium or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones for grassland care.

Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working with high working speed. The weeder sections are always parallel to the ground so all tines exert the same downwards pressure.
 

Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working with high working speed. The weeder sections are always parallel to the ground so all tines exert the same downwards pressure.
 

  1. Heavy-duty triangular levelling bar to level out molehills

  2. Solidly built but flexible frame to perfectly follow the contour of the ground

  3. Hydraulically controlled, parallelogram guided fixed weeder sections

  4. P-BOX for ideal seeding

  5. Distribution plates with splash guard for ideal spreading of the seeds

  6. 10 mm direct spring loaded tines with exact 2,5 cm line spacing

  7. Steps for easy and safe filling of the seeding box

  8. No reconsolidation roller

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

tine 490 mm/19.3“ long, Ø 8 mm/0.31“ (serial)

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

tine 490 mm/19.3“ long, Ø 8 mm/0.31“ (serial)

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

No rollers
To combine grassland weeder and rollers in one machine does not provide the desired effect. The centrally placed deflector plates ensure an even distribution of the seeds over the full working width. Furthermore, the operating speed of roller and grassland harrow do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller etablishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out, but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

No rollers
To combine grassland weeder and rollers in one machine does not provide the desired effect. The centrally placed deflector plates ensure an even distribution of the seeds over the full working width. Furthermore, the operating speed of roller and grassland harrow do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller etablishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out, but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

Increased vibration-effect due to special tine holder

Increased vibration-effect due to special tine holder

tine 490 mm/19.3“ long, Ø 10 mm/0.39“

For heavily felted grassland or in medium to heavy soil conditions, theses tines with a diameter of 10 mm / 0.39“ and a length of 490 mm / 19.3“ should be used. These tines are ideal to fight rough stalked meadow grass in summer.

tine 490 mm/19.3“ long, Ø 10 mm/0.39“

For heavily felted grassland or in medium to heavy soil conditions, theses tines with a diameter of 10 mm / 0.39“ and a length of 490 mm / 19.3“ should be used. These tines are ideal to fight rough stalked meadow grass in summer.

Deflector plates are mounted centrally on the tine sections
The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Deflector plates are mounted centrally on the tine sections
The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Pneumatic seeder P-BOX-MD
With the pneumatic seeding box P-BOX-MD the speed is transmitted to the seed drill via a ground wheel. The wheel is well protected against earth and stones by a special protection. The seed rate is adjusted via an adjusting lever on the infinitely variable drive of the P-BOX-MD. Machines with 3m and 6m width are equipped with a 300 l tank. The seed drill is equipped with a stirring shaft and a separate section on the seeding roller per hoses.

Pneumatic seeder P-BOX-MD
With the pneumatic seeding box P-BOX-MD the speed is transmitted to the seed drill via a ground wheel. The wheel is well protected against earth and stones by a special protection. The seed rate is adjusted via an adjusting lever on the infinitely variable drive of the P-BOX-MD. Machines with 3m and 6m width are equipped with a 300 l tank. The seed drill is equipped with a stirring shaft and a separate section on the seeding roller per hoses.

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

For stony soil these tines should be used. In order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm / 0.39” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

For stony soil these tines should be used. In order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm / 0.39” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with 35 mm / 1.38” Ø and brass bushings which can be greased. The position of the stop bars change the setup of the frame - either it is rigid or the side wings can go down to copy the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.

 

Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with 35 mm / 1.38” Ø and brass bushings which can be greased. The position of the stop bars change the setup of the frame - either it is rigid or the side wings can go down to copy the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.

 

Construction 6m machine 
Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

Construction 6m machine 
Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

Exact line spacing of the tines of 2.5cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched. 

Exact line spacing of the tines of 2.5cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched. 

Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5,9x3,9x0,2'' steel tubes and gusset plates reinforce heavily loaded spots of the frame.

Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5,9x3,9x0,2'' steel tubes and gusset plates reinforce heavily loaded spots of the frame.

Exact tine position and movement of the directly suspended springtines
The harrow tines are mounted to the harrow sections by plastic tine holders to ensure an exact tine position in driving direction. The spring coil of the tine is mounted below the tine holder to ensure free movement and vibration of the tine. In addition, the tines clean themselves due to the constant movement. A breakage of the tine is almost impossible, because the movement of the tine is not limited or restricted.

Exact tine position and movement of the directly suspended springtines
The harrow tines are mounted to the harrow sections by plastic tine holders to ensure an exact tine position in driving direction. The spring coil of the tine is mounted below the tine holder to ensure free movement and vibration of the tine. In addition, the tines clean themselves due to the constant movement. A breakage of the tine is almost impossible, because the movement of the tine is not limited or restricted.

Parking support with steps for filling
The filling steps ensure a safe and quick filling of the seed tank.

Parking support with steps for filling
The filling steps ensure a safe and quick filling of the seed tank.

Tines position adjustable with a lever per section
The aggressivity of the spring tines can be adjusted with a central lever per section in five different positions. The position can vary from dragging to “tip forward of the bend”.

Tines position adjustable with a lever per section
The aggressivity of the spring tines can be adjusted with a central lever per section in five different positions. The position can vary from dragging to “tip forward of the bend”.

PNEUMATICSTAR-PRO-STI 1200

  • Track width 2.2 m
  • Hydr. fan with pressure gauge (recommended: Load Sensing System)
  • 1 single acting hydr. valve with pressure free return line for the fan and 2 double acting hydr. valves necessary
  • Tank volume 500 l with monitoring window + opening to fully empty the box
  • Wheel chocks

Detaillierte Beschreibung:

Driven by a rubber wheel 
The grassland seeder PNEUMATICSTAR-PRO-MD is equipped with the pneumatic seeder P-BOX-MD as standard. The P-BOX-MD is an air seeder. It is able to seed all standard seeds and their mixtures up to a size of 5 mm. It is driven by a rubber wheel or a following tail wheel.

Driven by a rubber wheel 
The grassland seeder PNEUMATICSTAR-PRO-MD is equipped with the pneumatic seeder P-BOX-MD as standard. The P-BOX-MD is an air seeder. It is able to seed all standard seeds and their mixtures up to a size of 5 mm. It is driven by a rubber wheel or a following tail wheel.

transport width of 3 m

The sophisticated retraction mechanism together with putting the tines into the lowest angle position makes it possible to reduce the transport width to only 3 m

 

 

transport width of 3 m

The sophisticated retraction mechanism together with putting the tines into the lowest angle position makes it possible to reduce the transport width to only 3 m

 

 

PNEUMATICSTAR-PRO 1200

The PNEUMATICSTAR-PRO 1200 is designed for large-scale farms. The chassis, which is attached to the lower links of the tractor's 3-point hitch, is carried by two large dimensioned wheels. During operation six additional support wheels on the side-wings ensure optimal guidance of the machine in the field. A stable sectional steel tube frame with cross braces ensures smooth operation of the machine, preventing the frame from swinging forward or backward.

PNEUMATICSTAR-PRO 1200

The PNEUMATICSTAR-PRO 1200 is designed for large-scale farms. The chassis, which is attached to the lower links of the tractor's 3-point hitch, is carried by two large dimensioned wheels. During operation six additional support wheels on the side-wings ensure optimal guidance of the machine in the field. A stable sectional steel tube frame with cross braces ensures smooth operation of the machine, preventing the frame from swinging forward or backward.

Tank volume of 500 l

For an efficient working and without loosing too much time refilling the tank, a tank with a volume of 500 litres standard.

Tank volume of 500 l

For an efficient working and without loosing too much time refilling the tank, a tank with a volume of 500 litres standard.

half-timbered construction

The construction of the main frame enforced by cross braces is a guarantee for a long product life.

half-timbered construction

The construction of the main frame enforced by cross braces is a guarantee for a long product life.

Brochures grassland seeder PNEUMATICSTAR-PRO-MD
Brochures grassland seeder PNEUMATICSTAR-PRO-MD
Brochures grassland seeder PNEUMATICSTAR-PRO-MD
Downloads Downloads

Video grassland seeder PNEUMATICSTAR-PRO-MD and -STI

Video grassland seeder
PNEUMATICSTAR-PRO-MD
and -STI

Photos grassland seeder PNEUMATICSTAR-PRO-MD

Photos grassland seeder
PNEUMATICSTAR-PRO-MD

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Grassland seeder PNEUMATICSTAR-PRO-MD

  • Hydraulic level control
  • Exact application of seeds
  • Grooves will be de-thatched
  • Extremely solid construction
  • Spring mounted levelling plate
  • Levelling plate adjusts “on hold

Grassland seeder PNEUMATICSTAR-PRO-MD

Grassland seeder
PNEUMATICSTAR-PRO-MD

  • Hydraulic level control
  • Exact application of seeds
  • Grooves will be de-thatched
  • Extremely solid construction
  • Spring mounted levelling plate
  • Levelling plate adjusts “on hold

The PNEUMATICSTAR-PRO-MD is constructed as professional/pro-machine (than PNEUMATICSTAR-MD orPNEUMATICSTAR-STI) for Grassland restoration. The machine has 3, 6 or 12 meter working with and a extremely solid construction. A heavy levelling board which is overload-protected by springs, levels molehills in front of the support wheels. It is adjusted “on hold”, which lifts the soil and spreads it loose in the turf. Pores in the soil are not smeared up!

As the support wheels are behind the levelling plate the machine works very smoothly with a high working speed.

 

Electronic seeding is possible with the PNEUMATICSTAR-PRO-STI!

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP