grassland underseeding machine PNEUMATICSTAR-PRO-STI - for increasing the quality of green forage

Options grassland seeder PNEUMATICSTAR-PRO-STI

Options grassland seederPNEUMATICSTAR-PRO-STI

  • Tine loss protection
  • Retaining plate
  • Holder for control terminal
  • Warning signs with holder and LED-lights

 

Detail Description:

Warning signs
For the grassland seeding with the PNEUMATICSTAR-PRO-STI warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Warning signs
For the grassland seeding with the PNEUMATICSTAR-PRO-STI warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

tine 490 mm/19.3“ long, Ø 8 mm/0.31“

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

tine 490 mm/19.3“ long, Ø 8 mm/0.31“

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

Tines 490mm/19.3“ long, Ø 10 mm/0.39“
For heavily felted grassland or in medium to heavy soil conditions, theses tines with a diameter of 10 mm/0.39“ and a length of 490 mm/19.3“ should be used. These tines are ideal to fight rough stalked meadow grass in summer.

Tines 490mm/19.3“ long, Ø 10 mm/0.39“
For heavily felted grassland or in medium to heavy soil conditions, theses tines with a diameter of 10 mm/0.39“ and a length of 490 mm/19.3“ should be used. These tines are ideal to fight rough stalked meadow grass in summer.

Tines 490 mm/19.3“ long STRAIGHT, Ø 10 mm/0.39“
For stony soil these tines should be used. In order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm/0.39“ and a length of 490/19.3“ mm. Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

Tines 490 mm/19.3“ long STRAIGHT, Ø 10 mm/0.39“
For stony soil these tines should be used. In order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm/0.39“ and a length of 490/19.3“ mm. Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

Technical data grassland seeder PNEUMATICSTAR-PRO-STI

  • Lower and top links are provided with hardened bushings
  • Tines Ø 8 mm, 490 mm long
  • Frame hydraulically foldable
  • The frame ensures optiomal guidance of the levelling boards above the soil surface
  • Heavy, spring suspended front levelling bar (triangular) working in front of the support wheels
  • Line spacing 2.5 cm
  • Track width 200 cm
  • Tube frame section providing equal working pressure over the full width
  • Sections parallel guided with hydraulic level control
  • Parking support with filling steps
  • Airseeder with stirring shaft and separate seeding roller section per hose
  • Electric fan 12 volts
  • Electric cable with large diameter and control unit
  • One seeding roller with fine and one with coarse toothing
  • Seeding roller can be changed without tools
  • Tank made from sheet steel
  • Calibration plate + calibration pan
  • Tank volume 300 l with monitoring window + opening to fully empty the box
  • Adjustment of turning speed of the seeding roller via a ground wheel sensor - automatic switch off at the headland via an upper link sensor
  • Specially designed distribution plates with splash guard
  • Transport width 3.00 m

Type/

Working width cm

Number
of tines

Tankvol./

litres

Support wheels

Seeding rollers 6

Distribution plates

Folding

Sections

from HP/kW

Weight
approx. kg

rigidhydr.

PNEUMATICSTAR-PRO-STI 300 1,3

120

300

4

B,E

8

 

2

60/44

790

PNEUMATICSTAR-PRO-STI 600 1,4

240

300

6

C,E

8

 

4

80/59

1.370

PNEUMATICSTAR-PRO-STI 1200 2,5

480

500

8

D,F

16

 

8

170/125

4.440

 

 

1     Electric double fan 12 Volt

2     hydraulic fan with oil pressure manometer (requirements: pressure free return line, maximum capacity of the oil pump must not exceed 50 litres;

      recommendation: independent hydraulic valve or load sensing system)

3     1 double-acting hydraulic valve necessary

4     1 double-acting and 1 single-acting hydraulic valve necessary

5     3 double-acting hydraulic valves and 1 single-acting hydraulic valve with pressure free return line necessary

6     see photo of the seeding rollers in the concept of P-BOX-STI

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

Detail Description:

Tine 490 mm/19.3“ long, Ø 8 mm/0.31“
In medium or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones for grassland care.

Tine 490 mm/19.3“ long, Ø 8 mm/0.31“
In medium or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones for grassland care.

Increased vibration-effect due to special tine holder

Increased vibration-effect due to special tine holder

Pneumatic Seeder P-BOX-STI
The pneumatic seeding box P-BOX-STI provides adjustment of the seeding rate depending on the actual working speed, as well as the electrical control unit "SPEED-TRONIC". The power-supply comes from the 3-pin plug of the tractor. Machines with 3 m and 6 m working width come standard with a 300 l tank. The seed box is equipped with a stirring shaft and a separate section on the seeding roller for each hose.

Pneumatic Seeder P-BOX-STI
The pneumatic seeding box P-BOX-STI provides adjustment of the seeding rate depending on the actual working speed, as well as the electrical control unit "SPEED-TRONIC". The power-supply comes from the 3-pin plug of the tractor. Machines with 3 m and 6 m working width come standard with a 300 l tank. The seed box is equipped with a stirring shaft and a separate section on the seeding roller for each hose.

Construction 6m machine
Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

Construction 6m machine
Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5,9x3,9x0,2 '' steel tubes and gusset plates reinforce heavily loaded spots of the frame.

Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5,9x3,9x0,2 '' steel tubes and gusset plates reinforce heavily loaded spots of the frame.

Parking support with steps for filling
The filling steps ensure a safe and quick filling of the seed tank.

Parking support with steps for filling
The filling steps ensure a safe and quick filling of the seed tank.

PNEUMATICSTAR-PRO 1200

  • Track width 2.2 m
  • Hydraulic fan with pressure gauge (recommended: Load Sensing System)
  • 1 single acting hydraulic valve with pressure free return line for the fan and 2 double acting hydraulic valves necessary
  • Tank volume 500 l with monitoring window + opening to fully empty the box
  • Wheel chocks

Detail Description:

transport width of 3 m / 9.8''

The sophisticated retraction mechanism together with putting the tines into the lowest angle position makes it possible to reduce the transport width to only 3 m

transport width of 3 m / 9.8''

The sophisticated retraction mechanism together with putting the tines into the lowest angle position makes it possible to reduce the transport width to only 3 m

tank volume of 500 l

For an efficient working and without loosing too much time refilling the tank, a tank with a volume of 500 litres standard.

tank volume of 500 l

For an efficient working and without loosing too much time refilling the tank, a tank with a volume of 500 litres standard.

half-timbered construction

The construction of the main frame enforced by cross braces is a guarantee for a long product life.

half-timbered construction

The construction of the main frame enforced by cross braces is a guarantee for a long product life.

Concept grasslandseederPNEUMATICSTAR-PRO-STI

Brochures grassland seeder PNEUMATICSTAR-PRO-STI
Brochures grassland seeder PNEUMATICSTAR-PRO-STI
Brochures grassland seeder PNEUMATICSTAR-PRO-STI
Downloads Downloads

Video grassland seeder PNEUMATICSTAR-PRO-STI and -MD

Video grassland seeder
PNEUMATICSTAR-PRO-STI
and -MD

Photos grassland seeder PNEUMATICSTAR-PRO-STI

Photos grassland seeder
PNEUMATICSTAR-PRO-STI

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

  1. Heavy-duty triangular levelling bar to level out molehills

  2. Solidly built but flexible frame to perfectly follow the contour of the ground

  3. Hydraulically controlled, parallelogram guided fixed weeder sections

  4. P-BOX with operating monitor for ideal seeding

  5. Distribution plates with splash guard for ideal spreading of the seeds

  6. 10 mm direct spring loaded tines with exact 2,5 cm line spacing

  7. Steps for easy and safe filling of the seeding box

  8. No reconsolidation roller

 The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Advantages grassland seederPNEUMATICSTAR-PRO-STI

Heavy front levelling plante for perfect levelling of mole hills
A heavy triangular levelling plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open. 

Heavy front levelling plante for perfect levelling of mole hills
A heavy triangular levelling plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open. 

Hydraulic pressure regulation
The hydraulic pressure on the parallelograms can be adjusted from the cab via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggresivity is identical on each section over the full working
width. The turf is opened - this helps to control the rough stalked meadow grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly even in uneven terrain.

Hydraulic pressure regulation
The hydraulic pressure on the parallelograms can be adjusted from the cab via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggresivity is identical on each section over the full working
width. The turf is opened - this helps to control the rough stalked meadow grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly even in uneven terrain.

Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working with high working speed. The weeder sections are always parallel to the ground so all tines exert the same downwards pressure.

Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working with high working speed. The weeder sections are always parallel to the ground so all tines exert the same downwards pressure.

No rollers
To combine grassland weeder and rollers in one machine does not provide the desired effect. The centrally placed deflector plates ensure an even distribution of the seeds over the full working width. Furthermore, the operating speed of roller and grassland harrow do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller etablishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out, but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

No rollers
To combine grassland weeder and rollers in one machine does not provide the desired effect. The centrally placed deflector plates ensure an even distribution of the seeds over the full working width. Furthermore, the operating speed of roller and grassland harrow do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller etablishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out, but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

Deflector plates are mounted centrally on the tine sections
The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Deflector plates are mounted centrally on the tine sections
The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with 35 mm Ø and brass bushings which can be greased. The position of the stop bars change the setup of the frame - either it is rigid or the side wings can go down to copy the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.

Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with 35 mm Ø and brass bushings which can be greased. The position of the stop bars change the setup of the frame - either it is rigid or the side wings can go down to copy the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.

Exact line spacing of the tines of 2.5 cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched. 

Exact line spacing of the tines of 2.5 cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched. 

Exact tine position and movement of the directly suspended springtines
The harrow tines are mounted to the harrow sections by plastic tine holders to ensure an exact tine position in driving direction. The spring coil of the tine is mounted below the tine holder to ensure free movement and vibration of the tine. In addition, the tines clean themselves due to the constant movement. A breakage of the tine is almost impossible, because the movement of the tine is not limited or restricted.

Exact tine position and movement of the directly suspended springtines
The harrow tines are mounted to the harrow sections by plastic tine holders to ensure an exact tine position in driving direction. The spring coil of the tine is mounted below the tine holder to ensure free movement and vibration of the tine. In addition, the tines clean themselves due to the constant movement. A breakage of the tine is almost impossible, because the movement of the tine is not limited or restricted.

Tines position adjustable with a lever per section
The aggressivity of the spring tines can be adjusted with a central lever per section in five different positions. The position can vary from dragging to “tip forward of the bend”.

Tines position adjustable with a lever per section
The aggressivity of the spring tines can be adjusted with a central lever per section in five different positions. The position can vary from dragging to “tip forward of the bend”.

"SPEED-TRONIC" Terminal 
The PNEUMATICSTAR-PRO-STI grassland seeder is equipped with the pneumatic box P-BOX-STI. The user-friendly "SPEED-TRONIC" terminal regulates the sowing rate depending on the actual forward speed. The SPEED-TRONIC control unit with electrical quantity adjustment is very easy to use. The necessary speed information can be obtained via various sensors or via the 7-pole signal socket of the tractor.

"SPEED-TRONIC" Terminal 
The PNEUMATICSTAR-PRO-STI grassland seeder is equipped with the pneumatic box P-BOX-STI. The user-friendly "SPEED-TRONIC" terminal regulates the sowing rate depending on the actual forward speed. The SPEED-TRONIC control unit with electrical quantity adjustment is very easy to use. The necessary speed information can be obtained via various sensors or via the 7-pole signal socket of the tractor.

PNEUMATICSTAR-PRO 1200

The PNEUMATICSTAR-PRO 1200 is designed for large-scale farms. The chassis, which is attached to the lower links of the tractor's 3-point hitch, is carried by two large dimensioned wheels. During operation six additional support wheels on the side-wings ensure optimal guidance of the machine in the field. A stable sectional steel tube frame with cross braces ensures smooth operation of the machine, preventing the frame from swinging forward or backward.

PNEUMATICSTAR-PRO 1200

The PNEUMATICSTAR-PRO 1200 is designed for large-scale farms. The chassis, which is attached to the lower links of the tractor's 3-point hitch, is carried by two large dimensioned wheels. During operation six additional support wheels on the side-wings ensure optimal guidance of the machine in the field. A stable sectional steel tube frame with cross braces ensures smooth operation of the machine, preventing the frame from swinging forward or backward.

Grassland seeder PNEUMATICSTAR-PRO-STI

  • Dlectrically driven with SPEED-TRONIC
  • Hydraulic level control
  • Big variety of tines
  • Grooves will be de-thatched
  • Extremely solid construction
  • Spring mounted levelling plate

Grassland seeder PNEUMATICSTAR-PRO-STI

Grassland seeder
PNEUMATICSTAR-PRO-STI

  • Dlectrically driven with SPEED-TRONIC
  • Hydraulic level control
  • Big variety of tines
  • Grooves will be de-thatched
  • Extremely solid construction
  • Spring mounted levelling plate

Like the PNEUMATICSTAR-STI, the PNEUMATICSTAR-PRO-STI also uses the SPEEDTRONIC control unit. The seeding roller is also driven electrically. The machine has 3, 6 or 12 meter working with and a extremely solid construction. A heavy levelling board which is overload-protected by springs, levels molehills in front of the support wheels. It is adjusted “on hold”, which lifts the soil and spreads it loose in the turf. Pores in the soil are not smeared up!

As the support wheels are behind the levelling plate the machine works very smoothly with a high working speed.

 

Mechanical seeding with the PNEUMATICSTAR-PRO-MD!

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP