Grassland seeder PNEUMATICSTAR-STI - for lush grassland | EINBÖCK

Grassland seeder PNEUMATICSTAR-STI

  • Reseeding and underseeding with P-BOX-STI
  • Stimulating the tillering of the grass turf
  • For ideal grassland quality
  • Adapt very good to the soil surface
  • Yield increase
  • Weed out weeds like stalked meadow grass

Grassland seeder PNEUMATICSTAR-STI

Grassland seeder
PNEUMATICSTAR-STI

  • Reseeding and underseeding with P-BOX-STI
  • Stimulating the tillering of the grass turf
  • For ideal grassland quality
  • Adapt very good to the soil surface
  • Yield increase
  • Weed out weeds like stalked meadow grass

The PNEUMATICSTAR is designed for grassland care, seeding, under- and reseeding. The seeding roller is driven mechanically via the support wheel or is electronically controlled by different sensors. It is designed with steady frames and, depending on the working width, the frame is rigid or mechanic or hydraulic folding. Using high-quality materials and through the special, solid construction you can put additional pressure on the 6-row tine sections in hard soil conditions.

 

There are 2 versions of the PNEUMATICSTAR available. MD Version with mechanical drive of the seeding roller and STI with electronic drive of the seeding roller, controlled by the STI terminal.

 

Mechanical seeding with the PNEUMATICSTAR-MD!

Under- and Reseeding with a stronger frame construction: PNEUMATICSTAR-PRO-STI!

ConceptConcept
AdvantagesAdvantages
Technical dataTechnical data
OptionsOptions
MediaMedia
News|PraxisNews | Practice
ProspekteBrochures
Concept

Concept PNEUMATICSTAR‑STI

  1. P-BOX-STI for optimal and computer controlled seeding
  2. The seeding shaft is driven electronically via the SPEED-TRONIC control system in the tractor.
  3. Effective operation due to narrow line spacing of exact 2.5 cm / 1"
  4. Large selection of tines as options = the right tine for every job
  5. Central adjustment of the tine position per field (optional hydraulic adjustment)
  6. Steps for easy and safe filling of the seeding box
  7. No following crumblers
  8. Optionally available front levelling plates

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Advantages

Advantages PNEUMATICSTAR‑STI

Great flexibility of use

Just a few examples of the various ways you can use the machines: re- or new seeding in grassland (1), underseeding in cereals (2) or corn (3), etc.

Great flexibility of use

Just a few examples of the various ways you can use the machines: re- or new seeding in grassland (1), underseeding in cereals (2) or corn (3), etc.

Perfect for under- or reseeding

The pneumatic seeders with integrated stirring-shaft are designed in such a way that each sowing tube has its own seeding wheel section to achieve perfect dosing and uniform output. For working widths wider than 6 m / 19.70 ft. the seeding hoses are split to reach 12 or 16 outlets. Machines up to 6 m / 19.70 ft. working width are standard equipped with an electric double fan. Bigger machines work with a mechanical fan as standard. A hydraulic fan is available as an option.

Perfect for under- or reseeding

The pneumatic seeders with integrated stirring-shaft are designed in such a way that each sowing tube has its own seeding wheel section to achieve perfect dosing and uniform output. For working widths wider than 6 m / 19.70 ft. the seeding hoses are split to reach 12 or 16 outlets. Machines up to 6 m / 19.70 ft. working width are standard equipped with an electric double fan. Bigger machines work with a mechanical fan as standard. A hydraulic fan is available as an option.

Electrical quantity dosage
The grassland seeder PNEUMATICSTAR-STI is equipped with the pneumatic seeder P-BOX-STI as standard. The P-BOX-STI is a pneumatic airseeder with electrical adjustment of the seeding amount. The user-friendly SPEED-TRONIC control unit regulates the seed quantity depending on the actual working speed. The necessary speed info can be obtained via several sensors or via the 7-pole signal plug of the tractor.

Electrical quantity dosage
The grassland seeder PNEUMATICSTAR-STI is equipped with the pneumatic seeder P-BOX-STI as standard. The P-BOX-STI is a pneumatic airseeder with electrical adjustment of the seeding amount. The user-friendly SPEED-TRONIC control unit regulates the seed quantity depending on the actual working speed. The necessary speed info can be obtained via several sensors or via the 7-pole signal plug of the tractor.

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

Deflector plates are mounted centrally on the tine sections

The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Deflector plates are mounted centrally on the tine sections

The deflector plates with splash-guard are placed in the centre of each tine section. They spread the seeds before the last two rows of tine sections to establish optimal seed to soil contact.

Exact line spacing of the tines of 2.5 cm / 1”

The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.

Exact line spacing of the tines of 2.5 cm / 1”

The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.

Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The  spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
 

Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The  spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
 

Tine aggressivity quickly adjustable via central adjustment lever

The aggressivity of the spring loaded tines on the grassland care machine can be adjusted as required via one central adjustment lever per tine section in 5 positions between ''dragging'' or ''on grip''.

Tine aggressivity quickly adjustable via central adjustment lever

The aggressivity of the spring loaded tines on the grassland care machine can be adjusted as required via one central adjustment lever per tine section in 5 positions between ''dragging'' or ''on grip''.

Guaranteed equal tine aggressiveness over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressiveness over the entire frame length. This is particularly important in hard soil conditions.

Guaranteed equal tine aggressiveness over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressiveness over the entire frame length. This is particularly important in hard soil conditions.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft. and 15 m / 49.2 ft. can be folded to a transport width of only 3 m / 9.8 ft. Machines with a working width of 4.5 to 9 m / 14.8 - 29.5 ft. the side wings of the main frame are folded upwards for transport. 9 m / 29.5 ft. machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m / 39.4 ft. this is standard. On all versions a hitching very closely to the tractor is ensured.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft. and 15 m / 49.2 ft. can be folded to a transport width of only 3 m / 9.8 ft. Machines with a working width of 4.5 to 9 m / 14.8 - 29.5 ft. the side wings of the main frame are folded upwards for transport. 9 m / 29.5 ft. machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m / 39.4 ft. this is standard. On all versions a hitching very closely to the tractor is ensured.

Stronger construction from 9 m / 29.5 ft. working width

A larger working width means greater forces acting on a machine. The triangular bracing on machines with shear folding prevents the side wings from swinging and jumping even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

Stronger construction from 9 m / 29.5 ft. working width

A larger working width means greater forces acting on a machine. The triangular bracing on machines with shear folding prevents the side wings from swinging and jumping even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

 „100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

 „100 % made by EINBÖCK in AUSTRIA“

  • In-house development from the idea to serial production
    We have over 85 years experience in designing of agricultural machinery.
  • From practitioner for practitioner 
    75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
  • Suppliers from the region and Central Europe
    Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
  • Manufacturing exclusively in Dorf an der Pram in Upper Austria
    Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
  • Practical testing of all machines on our own test fields
    Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
  • After-sales service
    A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Technical data

Technical data PNEUMATICSTAR‑STI

  • Lower links, quick coupling pendular axle (up to 6 m / 19.7 ft.)
  • Mounting category CAT I up to 5 m / 16.4 ft. / CAT II from 6 m / 19.7 ft.
  • Tines Ø 7 mm, length 490 mm / 19.3", individually changeable
  • Line spacing 2,5 cm / 1"
  • Tine tube with anti-rotation device
  • Parking support (from 3 m / 9.8 ft. working width)
  • Pneumatic seeder P-BOX-STI with electric drive of the stirring shaft and separate seeding roller section per hose
  • Electric fan 12 volts - up to 6 m / 19.7 ft. working width
  • Electric cable with large diameter and control unit - up to 6 m / 19.7 ft. working width
  • Mechanical fan with PTO-shaft - for 9 m / 29.5 ft. and 12 m / 39.4 ft. working width
  • One Seeding roller with fine and one with coarse toothing
  • Seeding roller can be changed without tools
  • Tank made from sheet steel
  • Calibration plate + calibration pan
  • Tank volume 300 litres with tank inspection glass + drainage opening (for PNEUMATICSTAR 600 NR = 500 l)
  • Adjustment of speed of the seeding roller via a ground wheel sensor - automatic switch off at the headland via an upper link sensor
  • Specially designed distribution plates with splash guard
  • Filling steps
  • Transport width ≤ 3 m (9.8 ft.)
Type/
Working width cm / inch
TinesTankvol./litreFeeler wheelsDeflector platesSectionsSeeding rollersfrom
HP / kW

Weight approx.

kg / lbs

PNEUMATICSTAR-STI 200 / 78.70 1

84

300

2

8

1

B,E

25 / 18

260 / 573

PNEUMATICSTAR-STI 300 / 118.10 1

120

300

2

8

2

B,E

30 / 22

350 / 772

PNEUMATICSTAR-STI 500 / 196.90 2

204

300

4

8

3

C,E

50 / 37

580 / 1.279

PNEUMATICSTAR-STI 600 / 236.20 2

240

300

4

8

4

C,E

60 / 44

690 / 1.521

PNEUMATICSTAR-STI 600 / 236.20 SR 2

240

300

4

8

4

C,E

60 / 44

920 / 2.028

PNEUMATICSTAR-STI 900 / 354.30 3,4

360

300

4

12

6

G,H

90 / 66

1.400 / 3.086

PNEUMATICSTAR-STI 900 / 354.30 SR 3

360

300

4

12

6

G,H

90 / 66

1.490 / 3.285

PNEUMATICSTAR-STI 1200 / 472.40 3

480

300

4

16

8

D,F

100 / 74

 1.650 / 3.638

PNEUMATICSTAR-STI 1200 / 472.40 SR 3

480

300

4

16

8

D,F

100 / 74

1.760 / 3.880

 

1 rigid frame, not foldable
2 hydraulic folding
3 hydraulic folding with double folding
4 can be extended up to 12 m / 39.40 ft.
SR = heavy frame (for contractors or communities)

NR = with mechanical fan, also suitable for the distribution of fertilizer (seeding unit as well as distribution plates made from stainless steel), stronger gearbox, no European folding - frame SR version (heavy frame), 500 l tank standard

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

 

Increased vibration-effect due to special tine holder

 

Increased vibration-effect due to special tine holder

 

Tine 490 mm / 19.3” long, Ø 7 mm / 0.28“

This universal tine with a diameter of 7 mm / 0.28“ and a length of 490 mm / 19.3“ is optimal for middle to hard soils. With this tine length, soil unevenness can be perfectly compensated.

Tine 490 mm / 19.3” long, Ø 7 mm / 0.28“

This universal tine with a diameter of 7 mm / 0.28“ and a length of 490 mm / 19.3“ is optimal for middle to hard soils. With this tine length, soil unevenness can be perfectly compensated.

Rubber support wheels for gently operation

Depending on the working width, the grassland- and reseeding weeders are guided by two or four rubber support wheels. Via the support wheels the working depth of the tines is regulated. They are height-adjustable in the half-hole grid.

Rubber support wheels for gently operation

Depending on the working width, the grassland- and reseeding weeders are guided by two or four rubber support wheels. Via the support wheels the working depth of the tines is regulated. They are height-adjustable in the half-hole grid.

Stop bar for perfect soil adaption
By taking away or demounting the stop bar on the wing (only on machines without shear folding) the machine follows the contours of the land surface perfectly.
 

Stop bar for perfect soil adaption
By taking away or demounting the stop bar on the wing (only on machines without shear folding) the machine follows the contours of the land surface perfectly.
 

Mechanical locking in transport position
Frames on machines without shear folding lock mechanically in transport position. The lock is released via a pulling-rope.
(only on machines without shear folding)

Mechanical locking in transport position
Frames on machines without shear folding lock mechanically in transport position. The lock is released via a pulling-rope.
(only on machines without shear folding)

Tine section holders protected by plastic

Hard plastic protection at the connection between the tine section and its holders prevents wear of the steel components and ensures that they do not harm each other. They also ensure good guidance of the tine section, while still allowing adjustment to the terrain.

Tine section holders protected by plastic

Hard plastic protection at the connection between the tine section and its holders prevents wear of the steel components and ensures that they do not harm each other. They also ensure good guidance of the tine section, while still allowing adjustment to the terrain.

Options

Options PNEUMATICSTAR‑STI

  • Tines 490 mm / 19.3 long, ø 8 mm / 0.31"
  • Tines 490 mm / 19.3 long STRAIGHT, ø 8 mm / 0.31"
  • Tines 490 mm / 19.3 long, ø 10 mm / 0.39" (only for version SR)
  • Hydraulic transport lock for shear folding
  • Tine loss protection
  • Hydraulic tine adjustment
  • Spring-mounted front levelling plate
  • Retaining plate
  • Mechanical jogging unit
  • Mechanical fan
  • Hydraulic fan
  • GPS - Sensor instead of ground wheel sensor
  • Radar sensor instead of ground wheel sensor
  • Extension-kit for area-specific grassland reseeding with the “ProActive Sensor from ISARIA"
  • Cable to the 7-pin info plug
  • Alarm when seeding box is getting empty
  • Calibration button
  • Airflow monitoring
  • 500 litre tank and retaining plate
  • Plastic tank instead of the standard steel tank
  • Deflector plate made from stainless steel
  • Warning signs with holder and LED-lights

 

 

Detail Description

Hydraulic tine adjustment – perfect in changing soil conditions

The hydraulic tine adjustment makes adjustment to the GRASS-MANAGER in changing soil conditions easier. Furthermore, folding to the transport position is more convenient as you can easily put the tines into a flat position. The hydraulic tine adjustment can be retrofitted any time.

Hydraulic tine adjustment – perfect in changing soil conditions

The hydraulic tine adjustment makes adjustment to the GRASS-MANAGER in changing soil conditions easier. Furthermore, folding to the transport position is more convenient as you can easily put the tines into a flat position. The hydraulic tine adjustment can be retrofitted any time.

Options P-BOX-STI
For ideal options for the seeding unit P-BOX-STI, like different fan systems or 500l tank, click here.

Options P-BOX-STI
For ideal options for the seeding unit P-BOX-STI, like different fan systems or 500l tank, click here.

Area specific seeding with the "ProActive Sensor from Isaria"

To be able to adjust the seeding rate specifically to certain sub-areas (e.g. for grassland reseeding), the STI control is compatible with Isaria's ProActive Sensor. The two sensor heads of the Isaria ProActive sensor system are integrated in the frame on the front hitch of the tractor. They detect and analyse the crop; on this basis the correct seeding rate for the respective area is precisely determined and adjusted by the STI terminal of the seeding unit.

Area specific seeding with the "ProActive Sensor from Isaria"

To be able to adjust the seeding rate specifically to certain sub-areas (e.g. for grassland reseeding), the STI control is compatible with Isaria's ProActive Sensor. The two sensor heads of the Isaria ProActive sensor system are integrated in the frame on the front hitch of the tractor. They detect and analyse the crop; on this basis the correct seeding rate for the respective area is precisely determined and adjusted by the STI terminal of the seeding unit.

Levelling plate for excellent distribution and levelling of mole hills

In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of mole hills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment)

Levelling plate for excellent distribution and levelling of mole hills

In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of mole hills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment)

Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine

For heavily matted grassland or for middle to hard soil conditions, the tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3" should be used. These grassland tines are also ideal when used to control meadow panicle in summer.

(Only available for frame version SR & PRO)

Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine

For heavily matted grassland or for middle to hard soil conditions, the tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3" should be used. These grassland tines are also ideal when used to control meadow panicle in summer.

(Only available for frame version SR & PRO)

Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“

In case of middle matted grassland or middle soil conditions, the tines with a diameter of 8 mm / 0.31" and a length of 490 mm / 19.3" are preferable. These tines are also the most used.

Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“

In case of middle matted grassland or middle soil conditions, the tines with a diameter of 8 mm / 0.31" and a length of 490 mm / 19.3" are preferable. These tines are also the most used.

Tine 490 mm / 13.9” long STRAIGHT, Ø 8 mm / 0.31”

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 8 mm / 0.31” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet grassland.

Tine 490 mm / 13.9” long STRAIGHT, Ø 8 mm / 0.31”

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 8 mm / 0.31” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet grassland.

Warning signs with LED-lights
For this grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Warning signs with LED-lights
For this grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Plastic tank
Instead of the standard steel tank, a 265 l plastic tank can be installed. This corrosion-resistant design plastic tank is made of the highest quality materials and is thus extremely durable and unbreakable. 

Plastic tank
Instead of the standard steel tank, a 265 l plastic tank can be installed. This corrosion-resistant design plastic tank is made of the highest quality materials and is thus extremely durable and unbreakable. 

Media

Media PNEUMATICSTAR‑STI

Videos grassland seeder PNEUMATICSTAR-STI and -MD

Videos grassland seeder
PNEUMATICSTAR-STI and -MD

Photos grassland seeder PNEUMATICSTAR-MD and PNEUMATICSTAR-STI

Photos grassland seeder
PNEUMATICSTAR-MD
and PNEUMATICSTAR-STI

 

You can’t find the right photo? 

We have a big range of photos in various perspectives and cultures. Contact us here!

Brochures PNEUMATICSTAR-STI

The FUSION-FARMING handbookThe FUSION-FARMING handbook
The grassland care handbookThe Grassland
Care Handbook
Set-up instruction grassland care GRASS-MANAGER-(PRO) & PNEUMATICSTAR-(PRO)Set-up instruction
Grassland care
GRASS-MANAGER-(PRO) &
PNEUMATICSTAR-(PRO)
Brochure Grassland careBrochure
Grassland care
Data sheet grassland technologyData sheet
grassland technology
TOP

Contact

Kontaktanfrage - ausführlich EN

Formular
Name
Contact details
Upload