the grassland care machine GRASS-MANAGER-PRO | EINBÖCK

ConceptGrassland weederGrass-Manager-PRO

 

Advantagesgrassland weederGRASS-MANAGER-PRO

Technical datagrassland weederGRASS-MANAGER-PRO

  • Lower and top link mountings are equipped with hardened bushings - mounting category CAT II
  • Tines ø 8 mm, 490 mm long (serial)
  • Frame hydraulically foldable with single acting cylinder - on 6 m machine
  • Heavy, spring suspended front levelling bar (triangular) working in front of the support wheels
  • Line spacing 2.5 cm
  • Track width 200 cm
  • Tube frame section providing equal working pressure over the full width
  • Sections parallel guided with hydraulic level control
  • Parking support
  • Transport width 3.00 m

Optionsgrassland weederGRASS-MANAGER-PRO

  • Tine loss protection
  • Front mounting frame 
  • Warning signs with holder and LED-lights

Hydraulic pressure regulation for more efficiency

The effect of the hydraulic pressure is a smooth operation in high working speed. The working pressure of the section can be adjusted from the tractor. Furthermore, also the pressure regulation in uneven fields for all sections is an equal tine pressure.

Via the hydraulic system, pressure can be put on the tines. In hard conditions the grassland is aerated ideally. In addition, it is the perfect machine to fight common panicle in the summer. Moreover, pivoting forks with hydraulic level control ensure an improved following to the surface.

 

Hydraulic pressure regulation for more efficiency

The effect of the hydraulic pressure is a smooth operation in high working speed. The working pressure of the section can be adjusted from the tractor. Furthermore, also the pressure regulation in uneven fields for all sections is an equal tine pressure.

Via the hydraulic system, pressure can be put on the tines. In hard conditions the grassland is aerated ideally. In addition, it is the perfect machine to fight common panicle in the summer. Moreover, pivoting forks with hydraulic level control ensure an improved following to the surface.

 

  1. Optimum adaptation to the ground with one hydraulic cylinder per section
  2. Heavy triangular levelling plate for perfect levelling
  3. The frame ensures optimal guidance of the levelling boards above the soil surface
  4. Sections parallel guided with hydraulic level control

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

  1. Optimum adaptation to the ground with one hydraulic cylinder per section
  2. Heavy triangular levelling plate for perfect levelling
  3. The frame ensures optimal guidance of the levelling boards above the soil surface
  4. Sections parallel guided with hydraulic level control

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Detailed Description:

Standard equipment on 12 m machine - unlike other types

  • Track width 220 cm
  • Two double-acting hydr. remotes are required
  • Wheel chocks

Heavy levelling board

A heavy, spring triangular front levelling plate in front of the support wheels evens the mole hills.

Heavy levelling board

A heavy, spring triangular front levelling plate in front of the support wheels evens the mole hills.

Type/
Working width cm
TinesFront levelling
plates
Feller wheelsSectionsfrom
HP/kW

Weight

kg approx. / lbs

with front levelling plates - without seeder    
Grass-Manager-PRO 30012024260/44670 / 1 477
Grass-Manager-PRO 60024046480/591 280 / 2 822
Grass-Manager-PRO 1200 1480888170/1254 450 / 9 811
without front levelling plates - without seeder    
Grass-Manager-PRO 300120-4260/44590 / 1 301
Grass-Manager-PRO 600240-6480/591 100 / 2425
Grass-Manager-PRO 1200 1480-88170/1254 130 / 9105

 

1 trailed

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

Front mounting frame

For the PRO-series there is a front mounting frame available. With this frame an existing rear mounted machine can easily be converted into a front mounted machine. In front the wheels are steerable to ensure a better adoption to a curve.

 

Front mounting frame

For the PRO-series there is a front mounting frame available. With this frame an existing rear mounted machine can easily be converted into a front mounted machine. In front the wheels are steerable to ensure a better adoption to a curve.

 

Folding joints ensures optimal terrain following

The folding joints consist of a hardened bolt with 35 mm (1.38”) Ø and brass bushings which can be greased. By changing the position of the stop bar the wings can even go down. As a result not only the tine sections but also the heavy levelling boards follow the surface.

 

Folding joints ensures optimal terrain following

The folding joints consist of a hardened bolt with 35 mm (1.38”) Ø and brass bushings which can be greased. By changing the position of the stop bar the wings can even go down. As a result not only the tine sections but also the heavy levelling boards follow the surface.

 

Detailed Description:

Line spacing of 2,5 cm / 1”

The line spacing of 2,5 cm is very important for the quality of the operation result. 60 tines on 1.5 m / 4.9 ft working width make a static line distance of 2.5 cm / 1“. Only this distance will provide the desired effect of efficient weeding.

Line spacing of 2,5 cm / 1”

The line spacing of 2,5 cm is very important for the quality of the operation result. 60 tines on 1.5 m / 4.9 ft working width make a static line distance of 2.5 cm / 1“. Only this distance will provide the desired effect of efficient weeding.

Six support wheels for smoothly working

Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

 

Six support wheels for smoothly working

Six support wheels guide the frame also in high working speed smoothly, without shaking and with exact depth guidance across the grassland.

 

tine 490 mm/19.3“ long, Ø 8 mm/0.31“ (serial)

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

tine 490 mm/19.3“ long, Ø 8 mm/0.31“ (serial)

In middle or heavy soil, the tines with 8 mm (0.31”) diameter and 490 mm (19.3”) length should be used. These tines are the most common ones in grassland care.

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic mounts on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring coil of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the prong is not limited.

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic mounts on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring coil of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the prong is not limited.

Hardened Bushings

Hardened bushings on the 3-point mounting ensure a long working life of the mounting.

Hardened Bushings

Hardened bushings on the 3-point mounting ensure a long working life of the mounting.

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

 

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm (0.39”) and a length of 490 mm (19.3”). Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

 

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm (0.39”) and a length of 490 mm (19.3”). Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

Frame made with strong steel

The main frame is made from robust steel pipes and on the edges where the machine is subjected heavy, the frame is reinforced with gusset plates.

 

Frame made with strong steel

The main frame is made from robust steel pipes and on the edges where the machine is subjected heavy, the frame is reinforced with gusset plates.

 

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

 

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm (0.39”) and a length of 490 mm (19.3”). Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

tine 490 mm/19.3“ long STRAIGTH, Ø 10 mm/0.39“

 

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 10 mm (0.39”) and a length of 490 mm (19.3”). Tines adjusted “dragging“ protect the turf in wet or boggy grassland.

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

Spring tines adjustable with a central lever

The aggressiveness of the spring tines can be adjusted with a central lever per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

Brochure grassland weeder GRASS-MANAGER-PRO
Brochure grassland weeder GRASS-MANAGER-PRO
Brochure grassland weeder GRASS-MANAGER-PRO
Downloads Downloads

Videos grassland weeder GRASS-MANAGER-PRO with P-BOX-STI

Videos grassland weeder
GRASS-MANAGER-PRO
with P-BOX-STI

Photos grassland weeder GRASS-MANAGER-PRO

Photos grassland weeder
GRASS-MANAGER-PRO

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

Grassland weeder GRASS-MANAGER-PRO

  • Perfect levelling of molehills
  • Hydraulic level control
  • Big variety of tines
  • Front and rear mounting
  • Extremely solid construction
  • Spring mounted levelling plate

Grassland weeder GRASS-MANAGER-PRO

Grassland weeder
GRASS-MANAGER-PRO

  • Perfect levelling of molehills
  • Hydraulic level control
  • Big variety of tines
  • Front and rear mounting
  • Extremely solid construction
  • Spring mounted levelling plate

The GRASS-MANAGER-PRO is the consequent further developed version of the GRASS-MANAGER that has been proven in years. Every section is mounted on a parallelogram. One hydraulic cylinder per section ensures a perfect adaption to uneven ground and an optimal pressure compensation of the sections. The pressure can easily be adjusted from the tractor. A heavy triangular front levelling plate in front of the support wheels evens the mole hills.

 

The GRASS-MANAGER-PRO is the robust version of the GRASS-MANAGER. It was especially designed for contractors, machinery associations and large scale farms.

A pneumatic seed drill can also be mounted on the GRASS-MANAGER-PRO at any time (PNEUMATICSTAR-PRO-MD).

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP