The GRASS-MANAGER-PRO is the consequent further developed version of the GRASS-MANAGER that has been proven in years. Every section is mounted on a parallelogram. One hydraulic cylinder per section ensures a perfect adaption to uneven ground and an optimal pressure compensation of the sections. The pressure can easily be adjusted from the tractor. A heavy triangular front levelling plate in front of the support wheels evens the mole hills.
The GRASS-MANAGER-PRO is the robust version of the GRASS-MANAGER. It was especially designed for contractors, machinery associations and large scale farms.
A pneumatic seed drill can also be mounted on the GRASS-MANAGER-PRO at any time (PNEUMATICSTAR-PRO-MD).
8 mm / 0.31" or 10 mm / 0.39" direct spring-loaded tines with exact 2.5 cm / 1" line spacing
No following crumblers
The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.
Advantages
GRASS‑MANAGER‑PRO
Heavy front levelling plate for perfect levelling of mole hills
A heavy triangular plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open.
Heavy front levelling plate for perfect levelling of mole hills
A heavy triangular plate in front of the support wheels levels out the mole hills. The soil is distributed evenly on the surface, there is no reconsolidation of the ground and the pores of the soil remain open.
Hydraulic pressure regulation The hydraulic pressure on the parallelograms can be adjusted from the tractor cabin via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggressivity is identical on each section over the full working width. The turf is aerated - this helps to control the rough meadow-grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly also in uneven terrain.
Hydraulic pressure regulation The hydraulic pressure on the parallelograms can be adjusted from the tractor cabin via the tractor's hydraulic system. This means that the tine pressure can be easily increased or reduced depending on the soil conditions. The tine aggressivity is identical on each section over the full working width. The turf is aerated - this helps to control the rough meadow-grass in summer. The hydraulic levelling system guarantees an equal pressure on each weeder section and the tines to follow the contour of the ground perfectly also in uneven terrain.
Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working at high working speed. The weeder sections are always parallel to the ground so all tines have the same pressure.
Parallelogram-guided weeder sections
The hydraulic levelling system with parallelograms works very smoothly even when working at high working speed. The weeder sections are always parallel to the ground so all tines have the same pressure.
Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with Ø 35 mm / 1.38” and brass bushings which can be greased. The position of the stop bars changes the setup of the frame - either it is rigid or the side wings can go down to follow the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.
Ideal adjustment of the frame to follow the contour of the ground
The joints are equipped with hardened bolts with Ø 35 mm / 1.38” and brass bushings which can be greased. The position of the stop bars changes the setup of the frame - either it is rigid or the side wings can go down to follow the contour of the surface even better. Not only the tine sections, but also the heavy levelling boards can follow the surface of the ground.
Simple mounting of a seeding box
The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.
Simple mounting of a seeding box
The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.
Exact line spacing of the tines of 2.5 cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.
Exact line spacing of the tines of 2.5 cm / 1”
The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.
Stable operation Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.
Stable operation Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.
Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
Tine aggressivity quickly adjustable via central adjustment lever
The aggressivity of the spring loaded tines on the grassland care machine can be adjusted as required via one central adjustment lever per tine section in 5 positions between ''dragging'' or ''on grip''.
Tine aggressivity quickly adjustable via central adjustment lever
The aggressivity of the spring loaded tines on the grassland care machine can be adjusted as required via one central adjustment lever per tine section in 5 positions between ''dragging'' or ''on grip''.
Guaranteed equal tine aggressivity over the entire working width
The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.
Guaranteed equal tine aggressivity over the entire working width
The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.
Six feeler wheels for smooth operation
Six feeler wheels guide the frame smoothly over the grassland with precise depth control and ensure operation without shaking of the frame even when working in high speed.
Six feeler wheels for smooth operation
Six feeler wheels guide the frame smoothly over the grassland with precise depth control and ensure operation without shaking of the frame even when working in high speed.
„100 % made by EINBÖCK in AUSTRIA“
In-house development from the idea to serial production We have over 85 years experience in designing of agricultural machinery.
From practitioner for practitioner 75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
Suppliers from the region and Central Europe Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
„100 % made by EINBÖCK in AUSTRIA“
In-house development from the idea to serial production We have over 85 years experience in designing of agricultural machinery.
From practitioner for practitioner 75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
Suppliers from the region and Central Europe Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.
Manufacturing exclusively in Dorf an der Pram in Upper Austria Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
Practical testing of all machines on our own test fields Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
After-sales service A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Manufacturing exclusively in Dorf an der Pram in Upper Austria Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
Practical testing of all machines on our own test fields Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
After-sales service A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.
Technical data
GRASS‑MANAGER‑PRO
Lower and upper links are equipped with hardened bushings - mounting category CAT II
Tines ø 8 mm / 0.31", 490 mm / 19.29" long, individually changeable
Frame hydraulically foldable with single acting cylinder - on 6 m / 19.7 ft. machine
Heavy, spring suspended front levelling bar (triangular) working in front of the support wheels
Line spacing 2.5 cm / 1"
Track width 200 cm / 78.7"
Tine tube with anti-rotation device
Sections parallel guided with hydraulic level control
Parking support
Transport width 3 m / 9.8 ft.
Type/ Working width cm / inch
Tines
Front levelling plates
Feller wheels
Sections
from HP / kW
Weight approx.
kg / lbs
with front levelling plates - without seeder
GRASS-MANAGER-PRO 300 / 118.10
120
2
4
2
60 / 44
670 / 1.477
GRASS-MANAGER-PRO 600 / 236.20
240
4
6
4
80 / 59
1.280 / 2.822
GRASS-MANAGER-PRO XXL 1
480
8
8
8
170 / 125
4.200 / 9.259
without front levelling plates - without seeder
GRASS-MANAGER-PRO 300 / 118.10
120
-
4
2
60 / 44
590 / 1.301
GRASS-MANAGER-PRO 600 / 236.20
240
-
6
4
80 / 59
1.100 / 2.425
GRASS-MANAGER-PRO XXL 1
480
-
8
8
170 / 125
4.030 / 8.885
1 trailed
Technical data and specifications are approximate and without obligation. Construction and design are subject to change.
Detaillierte Beschreibung
Increased vibration-effect due to special tine holder
Increased vibration-effect due to special tine holder
Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“
In case of middle matted grassland or middle soil conditions, the tines with a diameter of 8 mm / 0.31" and a length of 490 mm / 19.3" are preferable. These tines are also the most used.
Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“
In case of middle matted grassland or middle soil conditions, the tines with a diameter of 8 mm / 0.31" and a length of 490 mm / 19.3" are preferable. These tines are also the most used.
Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5.9x3.9x0.2'' steel tubes and gusset plates reinforce heavily loaded spots of the frame.
Strong frame for long service-life
The main frame is made from 150x100x6 mm / 5.9x3.9x0.2'' steel tubes and gusset plates reinforce heavily loaded spots of the frame.
Hardened bushings Hardened bushings on the 3-point mounting ensure a long working life of the mounting.
Hardened bushings Hardened bushings on the 3-point mounting ensure a long working life of the mounting.
Options
GRASS‑MANAGER‑PRO
Tines 490 mm / 19.30" long, ø 10 mm / 0.39"
Tines 490 mm / 19.30" long STRAIGHT, ø 10 mm / 0.39"
Pneumatic seeding box Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.
Pneumatic seeding box Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.
Tine 490 mm / 19.3“ long STRAIGHT, Ø 10 mm / 0.39“
For heavily weeded areas and stony soils, in order not to necessarily deposit the stones on the soil surface, we recommend these straight tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3". "Dragging" tines are gentle on the turf in wet or boggy grassland. (Only available for frame version SR & PRO).
Tine 490 mm / 19.3“ long STRAIGHT, Ø 10 mm / 0.39“
For heavily weeded areas and stony soils, in order not to necessarily deposit the stones on the soil surface, we recommend these straight tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3". "Dragging" tines are gentle on the turf in wet or boggy grassland. (Only available for frame version SR & PRO).
Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine
For heavily matted grassland or for middle to hard soil conditions, the tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3" should be used. These grassland tines are also ideal when used to control meadow panicle in summer. (Only available for frame version SR & PRO)
Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine
For heavily matted grassland or for middle to hard soil conditions, the tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3" should be used. These grassland tines are also ideal when used to control meadow panicle in summer. (Only available for frame version SR & PRO)
Front mounting frame With this frame an existing rear mounted machine can easily be converted into a front mounted machine. In front the wheels are steerable to ensure a better adoption to a curve.
Front mounting frame With this frame an existing rear mounted machine can easily be converted into a front mounted machine. In front the wheels are steerable to ensure a better adoption to a curve.
Warning signs with LED-lights For the grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).
Warning signs with LED-lights For the grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).
![[Translate to English:] einboeck-aerostar-fusion-header2.jpg](/fileadmin/user_upload/einboeck/_processed_/3/3/csm_einboeck-aerostar-fusion-header2_635cd48a98.jpg "[Translate to English:]")
![[Translate to English:] einboeck_aerostar_aufgesattelt_trailed_semi-porte_hackstriegel_tined_weeder_herse_etrille_header_overview.jpg](/fileadmin/user_upload/einboeck/_processed_/e/a/csm_einboeck_aerostar_aufgesattelt_trailed_semi-porte_hackstriegel_tined_weeder_herse_etrille_header_overview_d06808bb2e.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-3-zinken-pro-hackelement-CHOPSTAR-3-60-Hackgeraet-bis-zu-60-cm-reihenabstand-hackgeraet-fuer-rueben.jpg](/fileadmin/user_upload/einboeck/_processed_/d/7/csm_Hackgeraete-mit-3-zinken-pro-hackelement-CHOPSTAR-3-60-Hackgeraet-bis-zu-60-cm-reihenabstand-hackgeraet-fuer-rueben_a4013a861d.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-5-zinken-pro-hackelement-CHOPSTAR-5-90-Hackgeraet-bis-zu-90-cm-reihenabstand-hackgeraet-fuer-mais.jpg](/fileadmin/user_upload/einboeck/_processed_/9/2/csm_Hackgeraete-mit-5-zinken-pro-hackelement-CHOPSTAR-5-90-Hackgeraet-bis-zu-90-cm-reihenabstand-hackgeraet-fuer-mais_dfa2e55725.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraete-mit-10-zinke-pro-hackelement-CHOPSTAR-10-150-hackgeraet-bis-zu-150-cm-reihenabstand-hackgeraet-fuer-kuerbis.jpg](/fileadmin/user_upload/einboeck/_processed_/2/b/csm_Hackgeraete-mit-10-zinke-pro-hackelement-CHOPSTAR-10-150-hackgeraet-bis-zu-150-cm-reihenabstand-hackgeraet-fuer-kuerbis_bb23421e53.jpg "[Translate to English:]")
![[Translate to English:] Hackgeraet-CHOPSTAR-TWIN-Titelbild-neu.JPG](/fileadmin/user_upload/einboeck/_processed_/7/6/csm_Hackgeraet-CHOPSTAR-TWIN-Titelbild-neu_ed5b71f07d.jpg "[Translate to English:]")
![[Translate to English:] einboeck-chopstar-prime-slider-2.jpg](/fileadmin/user_upload/einboeck/_processed_/0/4/csm_einboeck-chopstar-prime-slider-2_2fcf86112a.jpg "[Translate to English:]")
![[Translate to English:] Tellerhacke-CHOPSTAR-HYBRID-hacken-in-mulchbestaenden-scheibenhackgeraet.JPG](/fileadmin/user_upload/einboeck/_processed_/e/0/csm_Tellerhacke-CHOPSTAR-HYBRID-hacken-in-mulchbestaenden-scheibenhackgeraet_33368fd765.jpg "[Translate to English:]")
![[Translate to English:] Rollsternhackgeraet-ROLLSTAR-rollhacke-hackgeraet-fuer-dammkulturen.jpg](/fileadmin/user_upload/einboeck/_processed_/7/3/csm_Rollsternhackgeraet-ROLLSTAR-rollhacke-hackgeraet-fuer-dammkulturen_a250a922f0.jpg "[Translate to English:]")
![[Translate to English:] Haeufelgeraet-HILLSTAR-dammkulturpflege-dammkultur-technik.JPG](/fileadmin/user_upload/einboeck/_processed_/5/a/csm_Haeufelgeraet-HILLSTAR-dammkulturpflege-dammkultur-technik_e6bae81a75.jpg "[Translate to English:]")
![[Translate to English:] header-zubehoer-zinken-scharen-1.jpg](/fileadmin/user_upload/einboeck/_processed_/7/7/csm_header-zubehoer-zinken-scharen-1_7e43ecf533.jpg)
![[Translate to English:] header-presse_einboeck_jumbo_stream.jpg](/fileadmin/user_upload/einboeck/_processed_/6/a/csm_header-presse_einboeck_jumbo_stream_5352a3959b.jpg "[Translate to English:]")
![[Translate to English:] feingrubber-VIBROSTAR-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/a/a/csm_feingrubber-VIBROSTAR-menu_883bf3f306.jpg "[Translate to English:]")
![[Translate to English:] leichtgrubber-TAIFUN-header-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/6/4/csm_leichtgrubber-TAIFUN-header-menu_2ad26b131a.jpg "[Translate to English:]")
![[Translate to English:] Universalgrubber-HURRICANE-Slider2-Schwergrubber-Mulchsaatgrubber-b.jpg](/fileadmin/user_upload/einboeck/_processed_/e/0/csm_Universalgrubber-HURRICANE-Slider2-Schwergrubber-Mulchsaatgrubber-b_8da262ecbd.jpg "[Translate to English:]")
![[Translate to English:] Gruenlandpflege-geraete-GRASS-MANAGER-Slider1-Steigerung-gruenfutterqualitaet-gruenlanderneuerung-technik.JPG](/fileadmin/user_upload/einboeck/_processed_/c/a/csm_Gruenlandpflege-geraete-GRASS-MANAGER-Slider1-Steigerung-gruenfutterqualitaet-gruenlanderneuerung-technik_29e7c3c483.jpg "[Translate to English:]")
![[Translate to English:] header-PNEUMATICSTAR-PRO-STI-menu.jpg](/fileadmin/user_upload/einboeck/_processed_/0/6/csm_header-PNEUMATICSTAR-PRO-STI-menu_73bff9a045.jpg "[Translate to English:]")
![[Translate to English:] Mechanisches-Saegeraet-P-BOX-MD-Slider1-Kleinsamen-saemaschine-Zwischenfrucht-saegeraete-b.jpg](/fileadmin/user_upload/einboeck/_processed_/4/0/csm_Mechanisches-Saegeraet-P-BOX-MD-Slider1-Kleinsamen-saemaschine-Zwischenfrucht-saegeraete-b_e646042e38.jpg "[Translate to English:]")
Concept
Advantages
Technical data
Options
Media
News | Practice
Brochures
DE
EN
FR
SI
RU
DK
NO
EE
