Grassland weeder GRASS-MANAGER

Simple mounting of a seeding box
The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.
 

Exact line spacing of the tines of 2.5 cm / 1”

The line spacing of exact 2.5 cm / 1” has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 60 tines on 1.5 m / 4.9 ft. fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be aerated.

Stable operation
Due to the solid and strong frame construction the operation of machine and frame is very steady, independently from the working speed. Also on hard soil the tined weeder can apply sufficient pressure on the tines without making the frame swing. In addition, the frame is designed to withstand heavy loads and many seasons of operation without any problems.

Exact tine position and movement

The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The  spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.

Tine aggressivity quickly adjustable via central adjustment lever

The aggressivity of the spring loaded tines on the grassland care machine can be adjusted as required via one central adjustment lever per tine section in 5 positions between ''dragging'' or ''on grip''.

Guaranteed equal tine aggressivity over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.

Compact Retraction
Even machines with a working width of 12 m / 39.4 ft. and 15 m / 49.2 ft. can be folded to a transport width of only 3 m / 9.8 ft. Machines with a working width of 4.5 to 9 m  / 14.8 to 29.5 ft. the side wings of the main frame are folded upwards for transport. 9 m / 29.5 ft. machines can be equipped with a double-fold system and a heavy-duty construction, from 12 m / 39.4 ft. this is standard. On all versions a hitching very closely to the tractor is ensured.

Stronger construction from 9 m / 29.5 ft. working width

A larger working width means greater forces acting on a machine. The triangular bracing on machines with shear folding prevents the side wings from swinging and jumping even at higher working speeds. The tine aggressivity can be adjusted depending on the conditions.

 „100 % made by EINBÖCK in AUSTRIA“

• In-house development from the idea to serial production
  We have over 85 years experience in designing of agricultural machinery.
• From practitioner for practitioner 
  75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
• Suppliers from the region and Central Europe
  Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

• Manufacturing exclusively in Dorf an der Pram in Upper Austria
  Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
• Practical testing of all machines on our own test fields
  Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
• After-sales service
  A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.

Increased vibration-effect due to special tine holder

Tine 490 mm / 19.3" long, Ø 7 mm 0.28"

This universal tine with a diameter of 7 mm / 0.28" and a length of 490 mm / 19.3" is optimal for middle to hard soils. With this tine length, soil unevenness can be perfectly compensated.

Rubber support wheels for gently operation

Depending on the working width, the grassland- and reseeding weeders are guided by two or four rubber support wheels. Via the support wheels the working depth of the tines is regulated. They are height-adjustable in the half-hole grid.

Stop bar for perfect adoption to the surface

By taking away or demounting the stop bar on the wing (only on machines without shear folding) the machine follows the contours of the land surface perfectly.

Mechanical locking in transport position

Frames on machines without shear folding lock mechanically in transport position. The lock is released via a pulling-rope.

(only on machines without shear folding)

Tine section holders protected by plastic

Hard plastic protection at the connection between the tine section and its holders prevents wear of the steel components and ensures that they do not harm each other. They also ensure good guidance of the tine section, while still allowing adjustment to the terrain.

Hydraulic tine adjustment – perfect in changing soil conditions

The hydraulic tine adjustment makes adjustment to the GRASS-MANAGER in changing soil conditions easier. Furthermore, folding to the transport position is more convenient as you can easily put the tines into a flat position. The hydraulic tine adjustment can be retrofitted any time.

Pneumatic seeding box
Three different pneumatic seeding boxes are optionally available to seed catch or cover crops, undersown crops or small seeds. The P-BOX-STI is electrically driven, the P-BOX-MD mechanically (each with plastic or steel tank) or the front tank JUMBO-SEED also electrically.

Levelling plate for excellent distribution and levelling of mole hills

In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of mole hills. In addition, it distributes and levels manure and slurry. (Only up to 6 m / 19.7 ft. working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment)

Tines 490 mm / 19.3“ long, Ø 10 mm / 0.39“ instead of standard tine

(only available for heavy frame SR)

For heavily matted grassland or for middle to hard soil conditions, the tines with a diameter of 10 mm / 0.39" and a length of 490 mm / 19.3" should be used. These grassland tines are also ideal when used to control meadow panicle in summer. (Only available for frame version SR & PRO)

Tine 490 mm / 19.3“ long, Ø 8 mm / 0.31“ instead of standard tine

In case of middle matted grassland or middle soil conditions, the tines with a diameter of 8 mm / 0.31" and a length of 490 mm / 19.3" are preferable. These tines are also the most used.

Tine 490 mm / 13.9” long STRAIGHT, Ø 8 mm / 0.31” instead of standard tine

For stony soil, in order not to bring stones to the surface, we recommend the straight tines with a diameter of 8 mm / 0.31” and a length of 490 mm / 19.3”. Tines adjusted “dragging“ protect the turf in wet grassland.

Front mounting frame
For the PRO-series there is a front mounting frame available. With this frame an existing rear mounted machine can easily be converted into a front mounted machine.

Warning signs with LED-lights
For the grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).