pneumatic seeding box P-BOX-MD - small seed drill for catch crops

Conceptpneumatic seeding boxP-BOX-MD

Advantagespneumatic seeding boxP-BOX-MD

Optionspneumatic seeding boxP-BOX-MD

  • Ground drive via an air wheel
  • Ground drive pendular
  • Mechanical jogging unit
  • Cable to tractor 8 m instead of 3 m
  • Hectare-counter electronic
  • Retaining plate
  • Tank support
  • 500 litre tank
  • Mechanical fan
  • Hydraulic fan
  • Airflow monitoring
  • Tank level sensor
  • 90° angle unit for flexible shaft
  • Electric adjustment of seeding quantity
  • P-BOX-MD with seeding unit made from stainless steel
  • Steps for filling
  • Deflector plate made from stainless steel

Technical datapneumatic seeding boxP-BOX-MD

  • P-BOX-MD = constant seeding rate, automatically adjusted to the working speed via a ground drive
  • Bottom drive through air wheel
  • Stirring shaft
  • Mounting console
  • Calibration plate + calibration pan
  • Electric cable with large diameter and control unit
  • Specially designed distribution plates with splash guard
  • Bottom drive with flexible shaft 2,1 m long
  • Seeding roller with separate section per hose
  • One seeding roller with fine and one with coarse toothing
  • Seeding roller can be changed without tools
  • Tank made from sheet steel
  • Monitoring window + opening to fully empty the box
  • 6 m machine with electric fan, 12 volts and 24 m hose
  • 12 m machines with mechanical fan and PTO-shaft and 40 m hose

Type/
Working width cm

Working width
(maximum 3)

Tank volume in litre

Deflector plates

Seeding rollers 4

Weight kg approx.

P-BOX-MD 600 1

6.00 m

300

8

B, E

86

P-BOX-MD 1200 2

12.00 m

300

16

F, D

105

 

1     with the 6.00 m machine heavy seeds can be spread up to 3.00 m

      for distribution of heavy seeds on 6.00 m working width there is the choice between hydr. or mech. fan

2     with mechanical fan

3     for small seeds (grass, clover, etc.)

4    see photo seeding rollers (advantages)

 

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types.

Flexible drive shaft

The flexible drive shaft flanged to the rubber support wheel or tail wheel transfers the power to an infi nitely variable oil-immersed gearbox, which powers the seeding roller and the stirring shaft by a chain drive.

 

  • Serial: Bottom drive with air wheel, fix mounted to the frame.
  • Optional: Bottom drive with air wheel, which is pressed on a roller.
  • Optional: Suspended bottom drive with 90° angle unit through trailing tail wheel instead of standard version.
  1. Quantity dosage dependent on speed
  2. Mechanical bottom drive with trailing tall wheel without sensors
  3. seeding roller with coarse and a fine toothing

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

  1. Quantity dosage dependent on speed
  2. Mechanical bottom drive with trailing tall wheel without sensors
  3. seeding roller with coarse and a fine toothing

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Detail Description

For every seed the correct seeding roller

We offer a wide range of seeding rollers which can be ordered. One seeding roller with fine and one with coarse toothing are part of the standard equipment. The seeding rollers are suited for the following seeds depending on seeding quantity, working width and working speed.

For every seed the correct seeding roller

We offer a wide range of seeding rollers which can be ordered. One seeding roller with fine and one with coarse toothing are part of the standard equipment. The seeding rollers are suited for the following seeds depending on seeding quantity, working width and working speed.

500 litres seed tank

On request the airseeders are available with a 500 litres seed tank (with tank support and extra-large opening).

500 litres seed tank

On request the airseeders are available with a 500 litres seed tank (with tank support and extra-large opening).

Detail Description

Splash guard for exact distribution

The deflector plates are equipped with a splash guard to make sure the seeds are evenly distributed. The holder of the plate can be adjusted infinitely variable.

Splash guard for exact distribution

The deflector plates are equipped with a splash guard to make sure the seeds are evenly distributed. The holder of the plate can be adjusted infinitely variable.

Retaining plate

For heavy seeds we recommend the retaining plate mounted above the stirring shaft and the seeding roller.

Retaining plate

For heavy seeds we recommend the retaining plate mounted above the stirring shaft and the seeding roller.

Large-dimensioned chain

A large-dimensioned chain with tightener transfers the power from the oil-immersed gear box to the seeding roller and the stirring shaft.

Large-dimensioned chain

A large-dimensioned chain with tightener transfers the power from the oil-immersed gear box to the seeding roller and the stirring shaft.

Outlets are adjustable

The standard P-BOX has 8 sections on the seeding roller, but with special rollers in combination with sealing plugs the outlets can be reduced. You can also use distributer heads for doubling the outlets (e.g. 16 outlets from eight sections). If a P-BOX is mounted for example on a 9 m Einböck GRASS-MANAGER or AEROSTAR, you need a seeding roller with 6 sections and 2 sealing plugs.

Outlets are adjustable

The standard P-BOX has 8 sections on the seeding roller, but with special rollers in combination with sealing plugs the outlets can be reduced. You can also use distributer heads for doubling the outlets (e.g. 16 outlets from eight sections). If a P-BOX is mounted for example on a 9 m Einböck GRASS-MANAGER or AEROSTAR, you need a seeding roller with 6 sections and 2 sealing plugs.

Mechanic jogging

We also offer a mechanic jogging unit for sticky seeds.

Mechanic jogging

We also offer a mechanic jogging unit for sticky seeds.

No seeding of subareas

In case there are areas you do not want to seed, you can disconnect the flexible shaft from the gearbox by taking away the bolt where the shaft enters the gearbox.

Option: If you want to do so without leaving the tractor seat, you can get an electric adjustment of the seeding quantity, which allows you to adjust the seeding quantity to “0“.

 

 

300 litres seed tank

The standard seed tank has a capacity of 300 litres. A stirring shaft prevents the seed mix from separating and from bridging in the tank. (Optional: 500 litres tank)

300 litres seed tank

The standard seed tank has a capacity of 300 litres. A stirring shaft prevents the seed mix from separating and from bridging in the tank. (Optional: 500 litres tank)

Airflow monitoring

The optional airflow monitoring checks the fan and warns of clogged seed hoses.

 

Tank level monitoring

 

Electronic hectare Counter

 

Control unit for quantity adjustment

With this control unit, that can easily be mounted in the tractor cabin with a velcro, you can switch on/off the electric fan.

 

Types of fans

The air stream blowing the seeds to the deflector plates is produced either by an electric, hydraulic, shaft-driven or a special fan, which is attached directly to the PTO shaft of the tractor.

  • Mechanic fan with PTO shaft (more than 6 m working width)
  • Electronic double fan 12 Volt (until 6 m working width)
  • Hydraulic fan with oil pressure manometer (optional: requirements: pressure free return line, maximum capacity of the oil pump must not exceed 50 litres per minute; recommendation: independent hydraulic valve or load sensing system)
  • Mechanic fan (optional)

Fast changing of the seeding rollers

The seeding roller can be changed without any tools.

Fast changing of the seeding rollers

The seeding roller can be changed without any tools.

Distance of the stripper

A lever adjusts the distance of the stripper according to the seed diameter.

Distance of the stripper

A lever adjusts the distance of the stripper according to the seed diameter.

Seeding roller

The seeding roller distributes the seeds into the eight divided and separated outlets. From there it is transported pneumatically via the PVC seed hoses to the deflector plates from where it is exactly spread over the entire working width. Since the seeds are blown pneumatically, wind does not matter as much as it would with mechanical seeders.

Seeding roller

The seeding roller distributes the seeds into the eight divided and separated outlets. From there it is transported pneumatically via the PVC seed hoses to the deflector plates from where it is exactly spread over the entire working width. Since the seeds are blown pneumatically, wind does not matter as much as it would with mechanical seeders.

Second Seeding roller

The 2nd seeding roller is always with the machine in its own container.

Second Seeding roller

The 2nd seeding roller is always with the machine in its own container.

Rubber Sealing

The rubber sealing ensures the tank is properly closed - this is necessary for an optimal operation. The opening lid can be mounted with opening to the left or to the right.

Rubber Sealing

The rubber sealing ensures the tank is properly closed - this is necessary for an optimal operation. The opening lid can be mounted with opening to the left or to the right.

Pneumatic seeding box P-BOX-MD

  • Mechanic drive
  • Perfect adjustment of seeding quantity
  • Different types of fans
  • Infinitely variable oil-immersed gearbox
  • Exact and precise seeding
  • Can be mounted on any machine

Pneumatic seeding box P-BOX-MD

Pneumatic seeding
box P-BOX-MD

  • Mechanic drive
  • Perfect adjustment of seeding quantity
  • Different types of fans
  • Infinitely variable oil-immersed gearbox
  • Exact and precise seeding
  • Can be mounted on any machine
Brochures pneumatic seeding box P-BOX-MD
Brochures pneumatic
seeding box P-BOX-MD
Brochures pneumatic seeding box P-BOX-MD
Downloads Downloads

Videos pneumatic seeding box P-BOX-MD

Videos pneumatic
seeding box P-BOX-MD

Photos pneumatic seeding box P-BOX-MD

Photos pneumatic
seeding box P-BOX-MD

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

The P-BOX-MD is an air seeder which can be mounted easily and fast to any machine (tined weeders, cultivators, hoes, disc harrows...). It is able to seed all standard seeds and their mixtures up to a size of 5 mm. It is driven by a rubber wheel or a following tail wheel.

With the P-BOX-MD (and also with the P-BOX-STI) it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. Depending on the seeding rate and working speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.

It can easily be retrofitted on Einböck machines and also on machines of other manufacturers.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP