pneumatic seeding box P-BOX-STI - for the easy application of green areas

Conceptpneumatic seeding boxP-BOX-STI

Video pneumatic seeding box P-BOX-STI

Video pneumatic
seeding box P-BOX-STI

Photos pneumatic seeding box P-BOX-STI

Photos pneumatic seeding box P-BOX-STI

  1. Constant seeding rate
  2. Electric drive and speed control of the seeding roller - "SPEED TRONIC" terminal (control unit in the tractor cabin)
  3. Different seeding rollers for distribution of many seed varieties
  4. Electric double fan (up to 6m; electric power supply via 3-pin socket) or mechanical fan (from 6m); option: hydraulic fan

 

The photos and images show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

  1. Constant seeding rate
  2. Electric drive and speed control of the seeding roller - "SPEED TRONIC" terminal (control unit in the tractor cabin)
  3. Different seeding rollers for distribution of many seed varieties
  4. Electric double fan (up to 6m; electric power supply via 3-pin socket) or mechanical fan (from 6m); option: hydraulic fan

 

The photos and images show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Advantagespneumatic seeding boxP-BOX-STI

Optionspneumatic seeding boxP-BOX-STI

  • Several assembly sets for Einböck cultivators, weeders, etc.)
  • Wheel sensor for ground wheel
  • Tail wheel with speed sensor
  • GPS - speed sensor
  • 7-pole cable
  • Upper link sensor
  • Radar sensor
  • Extension-kit for area-specific grassland reseeding with the “Isaria-Sensor from Co. Fritzmeier”
  • Tank level sensor
  • Calibration button
  • Airflow monitoring
  • Cable extension 5 m for control or sensors
  • Mechanic jogging unit
  • Retaining plate
  • Tank support
  • 500 litre tank
  • Mechanical fan
  • Hydraulic fan
  • P-BOX-STI with seeding unit made from stainless steel
  • Deflector plate made from stainless steel
  • Holder for control terminal
  • Steps for filling

Technical datapneumatic seeding boxP-BOX-STI

  • P-BOX-STI = constant seeding rate, automatically adjusted to the working speed eitherby a wheel-, GPS-, radar-sensor or via the 7-pin info plug of the tractor - electron. controlled
  • Stirring shaft
  • Mounting console
  • Calibration plate + calibration pan
  • Electric cable with large diameter and control unit
  • Specially designed distribution plates with splash guard
  • Seeding roller with separate section per hose
  • One seeding roller with fine and one with coarse toothing
  • Seeding roller can be changed without tools
  • Tank made from sheet steel
  • Monitoring window + opening to fully empty the box
  • 6 m machine with electric fan, 12 volts and 24 m hose
  • 12 m machines with mechanic fan and PTO shaft und 40 m hose

Many possible applications and machine combinations
Such as the application of intercrops (picture), catch crops, winter greening, new seeding, reseeding, fertilization, etc.
Mounted on: weeder (picture), row crop cultivators, cultivators, subsoilers, etc.

Many possible applications and machine combinations
Such as the application of intercrops (picture), catch crops, winter greening, new seeding, reseeding, fertilization, etc.
Mounted on: weeder (picture), row crop cultivators, cultivators, subsoilers, etc.

Type/
Working width cm

Working width (maximum 3)

Tank volume in litre

Deflector plates

Seeding rollers 4

Weight kg approx.

P-BOX-STI 600 1

6.00 m

300

8

B, E

86

P-BOX-STI 1200 2

12.00 m

300

16

D, F

105

 

1    for seeding of grain on 6.00 m working width a mechanical fan is needed

2    with mechanical fan

3    with fine seeds

4    see photo seeding rollers (advantages)

 

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types.

 

    Detail Description

    "SPEED-TRONIC" operating monitor in the tractor cabin developed by Einböck

    • Automatic computer-controlled constant seeding rate
    • Intuitive, graphical and colourful menu navigation in many different languages (> 15)
    • Large 5 inch colour display
    • Many individual settings
    • Raised buttons ensure an easy operation even while drivining; no slipping of the fingers and "blind" operation is possible
    • Resistant to dust and water
    • Compact and robust case

    "SPEED-TRONIC" operating monitor in the tractor cabin developed by Einböck

    • Automatic computer-controlled constant seeding rate
    • Intuitive, graphical and colourful menu navigation in many different languages (> 15)
    • Large 5 inch colour display
    • Many individual settings
    • Raised buttons ensure an easy operation even while drivining; no slipping of the fingers and "blind" operation is possible
    • Resistant to dust and water
    • Compact and robust case

    Necessary speed sensor
    Different sensors are available for speed detection.

    1. Via the 7-pin signal socket the values of the tractor can be taken over (e.g. speed information and linkage signal come from the tractor)
    2. Ground wheel sensor for support wheel (different versions depending on wheel and machine) - additional top link or linkage sensor required
    3. The GPS sensor is mounted on the filling lid of the box to precisely determine the speed - additional top link or linkage sensor required
    4. Sensor mounted on a following tail-wheel (different versions depending on wheel and machine) - additional top link or linkage sensor required (not shown)
    5. Radar sensor - additional top link or linkage sensor required (not shown).

    Necessary speed sensor
    Different sensors are available for speed detection.

    1. Via the 7-pin signal socket the values of the tractor can be taken over (e.g. speed information and linkage signal come from the tractor)
    2. Ground wheel sensor for support wheel (different versions depending on wheel and machine) - additional top link or linkage sensor required
    3. The GPS sensor is mounted on the filling lid of the box to precisely determine the speed - additional top link or linkage sensor required
    4. Sensor mounted on a following tail-wheel (different versions depending on wheel and machine) - additional top link or linkage sensor required (not shown)
    5. Radar sensor - additional top link or linkage sensor required (not shown).

    DetailDescription

    Many individual functions of the "SPEED-TRONIC" control:

    • Automatic calibration function (optional with a calibration button directly on the machine)
    • Automatic switch-off of the seeding roller at the headland
    • Pre-dosing function
    • Hectare counter of daily and total area
    • Operating hours counter (daily and total hours)

    Many individual functions of the "SPEED-TRONIC" control:

    • Automatic calibration function (optional with a calibration button directly on the machine)
    • Automatic switch-off of the seeding roller at the headland
    • Pre-dosing function
    • Hectare counter of daily and total area
    • Operating hours counter (daily and total hours)

    Various other sensors
    Many other optional sensors are available for increased safety, efficiency and accuracy at work

    1. Upper link sensor: the seeding shaft is automatically switched off when the implement is raised
    2. Linkage sensor: the seeding shaft is automatically switched off when the implement is lifted (mounting example)
    3. Airflow monitoring: this detects if one or more seeding hoses are clogged. In this case an acoustic and visual error message show up on the operating terminal
    4. Level sensor: it warns when the seeds in the tank are coming to an end. This sensor works independently of vibrations.

    Various other sensors
    Many other optional sensors are available for increased safety, efficiency and accuracy at work

    1. Upper link sensor: the seeding shaft is automatically switched off when the implement is raised
    2. Linkage sensor: the seeding shaft is automatically switched off when the implement is lifted (mounting example)
    3. Airflow monitoring: this detects if one or more seeding hoses are clogged. In this case an acoustic and visual error message show up on the operating terminal
    4. Level sensor: it warns when the seeds in the tank are coming to an end. This sensor works independently of vibrations.

    Stripper distance
    A lever adjusts the distance of the stripper according to the diameter of the seeds.

    Stripper distance
    A lever adjusts the distance of the stripper according to the diameter of the seeds.

    Exact seeding of different seed varieties
    The seeding shaft is driven by an electric motor which communicates with various sensors (listed in the options). This ensures that the set seeding rate is accurately applied even when working different speeds. On machines up to 6m the air flow is generated by an electric double fan. For machines bigger than 6 m working width a mechanical fan is used as standard (picture). A hydraulic fan is available as an option.

    Exact seeding of different seed varieties
    The seeding shaft is driven by an electric motor which communicates with various sensors (listed in the options). This ensures that the set seeding rate is accurately applied even when working different speeds. On machines up to 6m the air flow is generated by an electric double fan. For machines bigger than 6 m working width a mechanical fan is used as standard (picture). A hydraulic fan is available as an option.

    500 litre tank
    Seeding machines with a 500 litre tank are standard equipped with tank stabilizers, retaining plate and extra large filling opening (Attention: mounting on GRASS-MANAGER or various Einböck devices is only limited possible.)

    500 litre tank
    Seeding machines with a 500 litre tank are standard equipped with tank stabilizers, retaining plate and extra large filling opening (Attention: mounting on GRASS-MANAGER or various Einböck devices is only limited possible.)

    Seed hopper 300 l
    The standard seed tank has a capacity of 300 litres. A stirring shaft prevents the seed mix from separating and from bridging in the tank. (Optional: 500 litres tank)

    Seed hopper 300 l
    The standard seed tank has a capacity of 300 litres. A stirring shaft prevents the seed mix from separating and from bridging in the tank. (Optional: 500 litres tank)

    The right seeding roller for every seed
    From the wide range of seeding rollers one seeding roller with fine and one with coarse toothing are part of the standard equipment. This guarantees that the appropriate seeding roller can be used for different seeds. Further seeding rollers (9 in total) are available. Special seeding rollers can also be offered.

    The right seeding roller for every seed
    From the wide range of seeding rollers one seeding roller with fine and one with coarse toothing are part of the standard equipment. This guarantees that the appropriate seeding roller can be used for different seeds. Further seeding rollers (9 in total) are available. Special seeding rollers can also be offered.

    Calibration button on the seed tank
    A calibration button on the tank enables the calibration test to be carried out directly on the machine.

    Calibration button on the seed tank
    A calibration button on the tank enables the calibration test to be carried out directly on the machine.

    Protected chain drive instead of belts
    A large-dimensioned chain with tightener transfers the power from the electric motor to the seeding roller and the stirring shaft.

    Protected chain drive instead of belts
    A large-dimensioned chain with tightener transfers the power from the electric motor to the seeding roller and the stirring shaft.

    Splash guard for exact distribution
    The deflector plates are equipped with a height-adjustable splash guard to make sure the seeds are evenly distributed. The holder of the plate can be adjusted infinitely variable. In addition, the splash guard is fixed in a slotted hole so it can be adjusted to different types of seed.

    Splash guard for exact distribution
    The deflector plates are equipped with a height-adjustable splash guard to make sure the seeds are evenly distributed. The holder of the plate can be adjusted infinitely variable. In addition, the splash guard is fixed in a slotted hole so it can be adjusted to different types of seed.

    Retaining plate
    For heavy seeds we recomment the retaining plate mounted above the stirring shaft and the seeding roller.

    Retaining plate
    For heavy seeds we recomment the retaining plate mounted above the stirring shaft and the seeding roller.

    Types of fans
    The air stream blowing the seeds to the deflector plates is produced either by an electric, hydraulic, PTO-driven or a special fan, which is
    attached directly to the PTO shaft of the tractor.
    1. Mechanic fan with PTO shaft (more than 6 m working width)
    2. Electric double fan 12 Volt (until 6 m working width)
    3. Hydraulic fan with oil pressure manometer (optional requirements: pressure free return line, maximum capacity of the oil pump must not exceed 50 litres per minute; recommendation: independent hydraulic valve or load sensing system)
    4. Mechanic fan, directly attached to the PTO-shaft of the tractor (optional)

    Types of fans
    The air stream blowing the seeds to the deflector plates is produced either by an electric, hydraulic, PTO-driven or a special fan, which is
    attached directly to the PTO shaft of the tractor.
    1. Mechanic fan with PTO shaft (more than 6 m working width)
    2. Electric double fan 12 Volt (until 6 m working width)
    3. Hydraulic fan with oil pressure manometer (optional requirements: pressure free return line, maximum capacity of the oil pump must not exceed 50 litres per minute; recommendation: independent hydraulic valve or load sensing system)
    4. Mechanic fan, directly attached to the PTO-shaft of the tractor (optional)

    Spreading of many seed varieties
    Field bean, buckwheat, peas (x), fodder pro KM, barley, grassland pro B+NA, oats (x), clover, gold of pleasure, linseed, lupins, lucerne, poppy seed, oil radish, phazelia, rape, rye (x), red clover, turnip rape, slug pellet, mustard, soya bean, sunflower (x), soy vetch, triticale (x), white clover, wheat (x),. ..
    Attention - not all seed varieties can be sown with the standard equipment. For all species marked with (x) the following options must be ordered: Mechanical or hydraulic fan instead of electric fan as well as retaining plate. For the P-BOX-MD a reinforced gearbox is also necessary. Ask your Einböck consultant for further information

    Spreading of many seed varieties
    Field bean, buckwheat, peas (x), fodder pro KM, barley, grassland pro B+NA, oats (x), clover, gold of pleasure, linseed, lupins, lucerne, poppy seed, oil radish, phazelia, rape, rye (x), red clover, turnip rape, slug pellet, mustard, soya bean, sunflower (x), soy vetch, triticale (x), white clover, wheat (x),. ..
    Attention - not all seed varieties can be sown with the standard equipment. For all species marked with (x) the following options must be ordered: Mechanical or hydraulic fan instead of electric fan as well as retaining plate. For the P-BOX-MD a reinforced gearbox is also necessary. Ask your Einböck consultant for further information

    Tank stabilizers
    Tank stabilisers are recommended when the box is mounted on implements with high vibrations during operation (e.g. disc harrows). These are fitted as standard on 500l tanks.

    Tank stabilizers
    Tank stabilisers are recommended when the box is mounted on implements with high vibrations during operation (e.g. disc harrows). These are fitted as standard on 500l tanks.

    Second seeding roller
    The 2nd seeding roller is safely stored in a storage box on the machine and therefore always with you. So the seeding roller can be changed quickly for different seed types. 

    Second seeding roller
    The 2nd seeding roller is safely stored in a storage box on the machine and therefore always with you. So the seeding roller can be changed quickly for different seed types. 

    Quick change of the seeding rollers without tools
    The seeding rollers are installed in an easily accessible position and can be changed quickly and without tools.

    Quick change of the seeding rollers without tools
    The seeding rollers are installed in an easily accessible position and can be changed quickly and without tools.

    Mechanic jogging unit
    A mechanic jogging unit can be installed to avoid bridging. This is only necessary for seeds that have a particular tendency to bridge.

    Mechanic jogging unit
    A mechanic jogging unit can be installed to avoid bridging. This is only necessary for seeds that have a particular tendency to bridge.

    Rubber Sealing
    The rubber sealing ensures the tank is properly closed - this is necessary for an optimal operation. The opening lid can be mounted with opening to the left or to the right.

    Rubber Sealing
    The rubber sealing ensures the tank is properly closed - this is necessary for an optimal operation. The opening lid can be mounted with opening to the left or to the right.

    Weather independent and accurate sowing through hoses and seeding roller
    The seeding roller distributes the seeds into eight separated outlets. There they are transported pneumatically via PVC sowing hoses to the deflector plates which are adjustable in angle. In the over seeding method the seed is precisely distributed over the entire working width. In contrast to rotary broadcasters, seeding with the P-BOX system is insensitive to wind.

    Weather independent and accurate sowing through hoses and seeding roller
    The seeding roller distributes the seeds into eight separated outlets. There they are transported pneumatically via PVC sowing hoses to the deflector plates which are adjustable in angle. In the over seeding method the seed is precisely distributed over the entire working width. In contrast to rotary broadcasters, seeding with the P-BOX system is insensitive to wind.

    Mounting kits and steps for filling for Einböck machines
    For Einböck machines such as tine weeders, row crop cultivators, rotary hoe, rotive weeder, cultivator, grassland weeder, etc. a mounting kit including steps for filling are available. Due to the universal mounting bracket, the seeding boxes can also be mounted on many machines of other producers.

    Mounting kits and steps for filling for Einböck machines
    For Einböck machines such as tine weeders, row crop cultivators, rotary hoe, rotive weeder, cultivator, grassland weeder, etc. a mounting kit including steps for filling are available. Due to the universal mounting bracket, the seeding boxes can also be mounted on many machines of other producers.

    Calibration plate and calibration pan
    A calibration plate and calibration pan ensure simple and uncomplicated adjustment and calibration of the seed box. The parking position on the box guarantees quick accessability.

    Calibration plate and calibration pan
    A calibration plate and calibration pan ensure simple and uncomplicated adjustment and calibration of the seed box. The parking position on the box guarantees quick accessability.

    Seed tank made of sheet metal
    The tank of the P-BOX is made of sheet metal, which is environmentally friendly and cannot become brittle. Due to the excellent quality of the powder coating, the colour does not fade even after many years. In addition, the steel tank withstands shocks and can be easily bent out or repaired if damage occurs.

    Seed tank made of sheet metal
    The tank of the P-BOX is made of sheet metal, which is environmentally friendly and cannot become brittle. Due to the excellent quality of the powder coating, the colour does not fade even after many years. In addition, the steel tank withstands shocks and can be easily bent out or repaired if damage occurs.

    Area specific seeding with the "ProActive Sensor from Isaria"
    To be able to adjust the seeding rate specifically to certain sub-areas (e.g. for grassland reseeding), the STI control is compatible with Isaria's ProActive Sensor. The two sensor heads of the ISARIA ProActive sensor system are integrated in the frame on the front hitch of the tractor. They detect and analyse the crop; on this basis the correct seeding rate for the respective area is precisely determined and adjusted by the STI terminal of the seeding unit.

    Area specific seeding with the "ProActive Sensor from Isaria"
    To be able to adjust the seeding rate specifically to certain sub-areas (e.g. for grassland reseeding), the STI control is compatible with Isaria's ProActive Sensor. The two sensor heads of the ISARIA ProActive sensor system are integrated in the frame on the front hitch of the tractor. They detect and analyse the crop; on this basis the correct seeding rate for the respective area is precisely determined and adjusted by the STI terminal of the seeding unit.

    Electrical and mechanical drive monitoring
    A sensor monitors the drive of the seeding rollers. In addition a yellow indicator finger shows whether the seed roller is turning. This way it can be continuously checked whether the electric motor drives the chain and  also the seeding roller.

    Electrical and mechanical drive monitoring
    A sensor monitors the drive of the seeding rollers. In addition a yellow indicator finger shows whether the seed roller is turning. This way it can be continuously checked whether the electric motor drives the chain and  also the seeding roller.

    Monitoring window
    A visibly placed monitoring window helps the operator to check the level of the seeds left in the tank at any time from the tractor cab.

    Monitoring window
    A visibly placed monitoring window helps the operator to check the level of the seeds left in the tank at any time from the tractor cab.

    Robust substructure
    The seeding unit, constructed by Einböck and manufactured in-house, is designed for long life. Precise welds executed by welding robots ensure a perfect setup and smallest tolerance for years of trouble-free work.

    Robust substructure
    The seeding unit, constructed by Einböck and manufactured in-house, is designed for long life. Precise welds executed by welding robots ensure a perfect setup and smallest tolerance for years of trouble-free work.

    Outlets can be adapted as required
    The P-BOX-STI and P-BOX-MD are equipped with eight outlets as standard. But with special seeding rollers in combination with sealing plugs the outlets can be reduced. You can also use distributer heads for doublig the outlets (e.g. 16 outlets from eight sections). If a P-BOX is mounted for example on a 9 m GRASS-MANAGER or AEROSTAR, you need a seeding roller with 6 sections, 2 sealing plugs and 6 distributors.

    Outlets can be adapted as required
    The P-BOX-STI and P-BOX-MD are equipped with eight outlets as standard. But with special seeding rollers in combination with sealing plugs the outlets can be reduced. You can also use distributer heads for doublig the outlets (e.g. 16 outlets from eight sections). If a P-BOX is mounted for example on a 9 m GRASS-MANAGER or AEROSTAR, you need a seeding roller with 6 sections, 2 sealing plugs and 6 distributors.

    Draining outlet with flexible drain hose
    As the seed tank is often not emptied completely, excess seed can be drained from the tank via a flexible drain hose. By placing it directly above the seeding roller the tank is emptied almost without residue.

    Draining outlet with flexible drain hose
    As the seed tank is often not emptied completely, excess seed can be drained from the tank via a flexible drain hose. By placing it directly above the seeding roller the tank is emptied almost without residue.

    Simple mounting on Einböck implements and other makes
    The seeding box P-BOX can be easily and simply mounted on many Einböck machines as well as on machines of other manufacturers. For Einböck machines there are also mounting kits and steps for filling available.

    Simple mounting on Einböck implements and other makes
    The seeding box P-BOX can be easily and simply mounted on many Einböck machines as well as on machines of other manufacturers. For Einböck machines there are also mounting kits and steps for filling available.

    Pneumatic seeding box P-BOX-STI

    • SPEED-TRONIC included
    • wide range of seeding rollers
    • different types of fans
    • precise monitoring with several sensors
    • exact and precise seeding
    • can be mounted on any machine

    Pneumatic seeding box P-BOX-STI

    Pneumatic seeding
    box P-BOX-STI

    • SPEED-TRONIC included
    • wide range of seeding rollers
    • different types of fans
    • precise monitoring with several sensors
    • exact and precise seeding
    • can be mounted on any machine

    The P-BOX-STI is a pneumatic airseeder with electrical quantity dosage. The user-friendly SPEED-TRONIC control unit regulates the seed quantity depending on the factual working speed. The necessary speed info can be obtained via several sensors or via the 7-pole signal socket of the tractor.

    With the P-BOX-STI (and also with the P-BOX-MD) it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. Depending on the seeding rate and working speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.

    It can easily be retrofitted on Einböck machines and also on machines of other manufacturers.

    ConceptConceptConcept
    AdvantagesAdvantagesAdvantages
    Technical dataTechnical dataTechnical data
    OptionsOptionsOptions
    MediaMediaMedia
    TOP