Advantages cultivator TAIFUN

Technical data cultivator TAIFUN

Taifun 2,5 m – 7 m

Large spring tine Vulcanus 50x13, 525 mm clearance with standard share 53 mm
Solid frame construction
Tine arrangement on 4-beams
Line spacing 15 cm
Spring double drag tines between the last tine row and the rear roller – demountable without tools
Parking position for double drag tine on the frame, when they are not in use
Rear rollers parallelogram-guided and height adjustable in the half breadboard
All rollers with ball-bearings
Transport width 2.60 m
One double-acting hydraulic valve is required
Mounting CAT II+III with hardened bushings

Options cultivator TAIFUN

TAIFUN 2,5m - 7m

Semi-trailed version with chassis instead of mounted version (standard weight + 1 150 kg)
Brake axle for mounting of air brake
Air compressor
Steerable support wheels running in front of the wing (only for TAIFUN 600 and 700)
Protection cover for tines for street transportation on both sides
Steps for filling
Spring-tine Herkules

TAIFUN trailed 8m, 9m and 12m

VIBRO-BOARD, hydraulically adjustable
Duckfoot sweep 200 mm instead of or additionally to the standard share
Protection cover for tines for road transport on both sides
Vulcanus tine

Brochures cultivator TAIFUN

Downloads

Type/ Working width cm	Double drag tines	No. of beams/ tines	Mounting category	HP/kW	Weight approx. kg
TAIFUN 250 F ¹	4	4/17	II	70/52	940
TAIFUN 250 R ¹	4	4/17	II	70/52	960
TAIFUN 250 ST ¹	4	4/17	II	70/52	850
TAIFUN 250 FZ ¹	4	4/17	II	70/52	1.070
TAIFUN 250 RZ ¹	4	4/17	II	70/52	1.090
TAIFUN 250 RP 47 ^1,4	4	4/17	II	70/52	1.130

TAIFUN 300 F ¹	5	4/20	II	90/66	1.050
TAIFUN 300 R ¹	5	4/20	II	90/66	1.070
TAIFUN 300 ST ¹	5	4/20	II	90/66	960
TAIFUN 300 FZ ¹	5	4/20	II	90/66	1.130
TAIFUN 300 RZ ¹	5	4/20	II	90/66	1.240
TAIFUN 300 RP 47 ^1,4	5	4/20	II	90/66	1.250

TAIFUN 400 F	6	4/26	II+III	110/81	1.660
TAIFUN 400 R	6	4/26	II+III	110/81	1.690
TAIFUN 400 ST	6	4/26	II+III	110/81	1.530
TAIFUN 400 FZ	6	4/26	II+III	110/81	1.880
TAIFUN 400 RZ	6	4/26	II+III	110/81	1.900
TAIFUN 400 RP 47 ⁴	6	4/26	II+III	110/81	1.960

TAIFUN 500 F	8	4/34	II+III	130/95	1.880
TAIFUN 500 R	8	4/34	II+III	130/95	1.920
TAIFUN 500 ST	8	4/34	II+III	130/95	1.740
TAIFUN 500 FZ	8	4/34	II+III	130/95	2.140
TAIFUN 500 RZ	8	4/34	II+III	130/95	2.190
TAIFUN 500 RP 47 ⁴	8	4/34	II+III	130/95	2.260

TAIFUN 600 F	10	4/40	II+III	160/118	2.050
TAIFUN 600 R	10	4/40	II+III	160/118	2.090
TAIFUN 600 ST	10	4/40	II+III	160/118	1.880
TAIFUN 600 FZ	10	4/40	II+III	160/118	2.370
TAIFUN 600 RZ	10	4/40	II+III	160/118	2.400
TAIFUN 600 RP 47 ⁴	10	4/40	II+III	160/118	2.450

TAIFUN 700 F	12	4/46	II+III	190/140	2.490
TAIFUN 700 R	12	4/46	II+III	190/140	2.570
TAIFUN 700 ST	12	4/46	II+III	190/140	2.260
TAIFUN 700 FZ	12	4/46	II+III	190/140	2.880
TAIFUN 700 RZ	12	4/46	II+III	190/140	2.920
TAIFUN 700 RP 47 ⁴	12	4/46	II+III	190/140	3.000

¹ rigid, not foldable

² semi-mounted

³ Attention: Transport height approx. 4,30 m

⁴ if semi-mounted, RP 58 recommended (instead of RP 47)

Rear roller:

F Flat rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

R Round rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

ST 1-row weeder tines, ø 12 mm incl. 4 support wheels (18x8.5-8) (if rigid only 2 support wheels)

FZ Front flat rod roller ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RZ Front round rod ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RP 47 Ring packer roller ø 470 mm with leveller and trailed weeder tines, 2-rows, ø 10 mm

RP 58 Ring packer roller ø 575 mm with leveller and trailed weeder tines, 1-row, ø 12 mm

DN Double nova roller ø 575 mm

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types

Videos cultivator TAIFUN

Concept cultivator TAIFUN

Tube-in-tube construction

The tube-in-tube construction of the frame guarantees longevity and stability.

Tube-in-tube construction

The tube-in-tube construction of the frame guarantees longevity and stability.

Big frame clearance

The big frame clearance (up to 580 mm) guarantees clogg free working and a perfect work result even in a big amount of organic matter.

Big frame clearance

The big frame clearance (up to 580 mm) guarantees clogg free working and a perfect work result even in a big amount of organic matter.

P-BOX for catch crop sowing

With the P-BOX-MD or the P-BOX-STI it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. (steht nicht auf der Homepage) Depending on the seeding rate and - speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.

The seed is conveyed pneumatically via hoses to the distribution plates which spread the seeds precisely. Depending on the version of the box the metering roller is driven by an electric motor or mechanically by a flexible cable with various ground drive variants.

P-BOX for catch crop sowing

Photos cultivator TAIFUN

Download

4-beam construction
Various tines and sweeps
15 cm / 5,9'' line spacing; 60 cm / 23,6'' line distance
Clearance up to 580 mm / 22,8''
Double drag tines
Working depth easily adustable via half breadboard
Large selection of rear rollers and trailed weeder tines

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

4-beam construction
Various tines and sweeps
15 cm / 5,9'' line spacing; 60 cm / 23,6'' line distance
Clearance up to 580 mm / 22,8''
Double drag tines
Working depth easily adustable via half breadboard
Large selection of rear rollers and trailed weeder tines

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

Spring Tine Vulcanus 50x13 mm, clearance 525 mm'

The spring tine Vulcanus (standard) is made from 50x13 mm spring steel (clearance 525 mm9. The Vulcanus tine is recommended for light and medium soil for seedbed preparation after ploughing up to a working depth of 15 cm. For this operation the use of duckfoot shares up to a working depth of 10 cm is also possible.

The strong spring tines Vulcanus, made from high-quality spring steel and mounted on four beams, are designed for long service life.

Narrow share

The narrow share (standard equipment) is 53 mm wide and is recommended for operations deeper than 10 cm

Duckfoot sweep

The duckfoot sweep with a width of 200 mm is suitable for complete tillage of the full surface in low depth.

Both shares are 6 mm thick.

Spring Tine Vulcanus 50x13 mm, clearance 525 mm'

The strong spring tines Vulcanus, made from high-quality spring steel and mounted on four beams, are designed for long service life.

Narrow share

The narrow share (standard equipment) is 53 mm wide and is recommended for operations deeper than 10 cm

Duckfoot sweep

The duckfoot sweep with a width of 200 mm is suitable for complete tillage of the full surface in low depth.

Both shares are 6 mm thick.

Supporting wheels front

For an even smoother running and depth guidance at bigger working widths (from 6m)

Supporting wheels front

For an even smoother running and depth guidance at bigger working widths (from 6m)

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

100% even tine allocation

An even tine allocation ensures clogg free working, full area cutting of the surface and a calm dragging behaviour.

100% even tine allocation

An even tine allocation ensures clogg free working, full area cutting of the surface and a calm dragging behaviour.

2 folding cylinders

Two folding cylinders provide a triangular strut and even folding on both sides. This is useful in hilly terrain. Both cylinders are latched by lock-blocks.

2 folding cylinders

Two folding cylinders provide a triangular strut and even folding on both sides. This is useful in hilly terrain. Both cylinders are latched by lock-blocks.

TAIFUN trailed 8m, 9m and 12m

Hercules tine 70x12, 580 mm clearance
Heavy frame, semi-mounted
Coupling CAT III with hardened bushings.
Both sides guided lower link pins
Drawbar adjustable in length and holder for hydr. hoses
Tine arrangement on 4-beams
Line spacing 15 cm
Spring double drag tines between the last tine row and the rear roller – demountable without tools
Adjustment of the working depth via with half-hole grid breadboard on the rear roller
All rollers with ball-bearings
Parking position for double drag tines
Parking support with wheel chocks
3 double-acting hydraulic valves necessary
Front support wheel - height adjustable
Braking axle for mounting of air brake

TAIFUN 800 RP 58 ²	13	4/54	III	200/147	7.500
TAIFUN 800 DN ²	13	4/54	III	200/147	7.750
TAIFUN 900 RP 58 ^2,3	15	4/60	III	240/176	7.900
TAIFUN 900 DN ^2,3	15	4/60	III	240/176	8.180
TAIFUN 1200 RP 58 ²	20	4/80	III	340/250	9.200
TAIFUN 1200 DN ²	20	4/80	III	340/250	9.550

¹ rigid, not foldable

² semi-mounted

³ Attention: Transport height approx. 4,30 m

⁴ if semi-mounted, RP 58 recommended (instead of RP 47)

Levelling plate „dragging“ or „on hold“

The levelling plate is clamped on the front of the frame and can be adjusted in height through bolts. The levelling plate crushes clods and can be adjusted “dragging” or “on hold”. It levels the soil and covers the tractor-track. The operation of the working tools is extremely smooth and the working depth is maintained exactly. In spring the levelling plate is especially recommended for seedbed preparation.

Levelling plate „dragging“ or „on hold“

Pivoting Sideplate

The parallelogram-guided sideplate prevents ridging during seedbed preparation.

Pivoting Sideplate

The parallelogram-guided sideplate prevents ridging during seedbed preparation.

Lubricatable joint bearings with hardened bushings

Lower links and upper links with rotation locks and hardened bushings

Lubricatable joint bearings with hardened bushings

Lower links and upper links with rotation locks and hardened bushings

Spring Tine Herkules 70x12 mm, clearance 580 mm

The Herkules tine (option) is made of 70x12 mm spring tine steel (clearance 580 mm). The tine is recommended for seedbed preparation after ploughing up to a working depth of 15 cm in heavy soil (also stones). For this operation a use of duckfoot shares is also possible. This tine is also recommended for the first stubble operation in light and medium soil up to a working depth of 6 cm.

The sweep is mounted with two bolts, this is a big advantage in stony and heavy conditions.

Spring Tine Herkules 70x12 mm, clearance 580 mm

The sweep is mounted with two bolts, this is a big advantage in stony and heavy conditions.

Working depth precisely adjustable

The working depth of the cultivator can be adjusted via bread board on the parallel guided rear rollers. Additionally the working pressure of each roller or the angle of the trailed weeder tines to the soil can be adjusted with a spindle. All the pressure is on the rear roller. The machine works very calmly because all the weight of the cultivator is on the rear roller unit.

Working depth precisely adjustable

Chassis

For the TAIFUN with heavy rollers we recommend a chassis instead of the mounted version, since the heavy weight of the machine might harm the 3-point linkage of the tractor and increases soil compaction on the headland.

Chassis

The right roller

Tool-free adjustable and spring-mounted double drag tines

Double drag tines guarantee an even levelling between the last row of tines and the rear rollers or weeder tines. This is an advantage because the rear roller can evenly restore the soil contact over the entire working width. They can be dismounted without tools and kept safe directly on the frame.

Tool-free adjustable and spring-mounted double drag tines

Warning signs and light

Warning signs are available front and rear. Symbolic image (depends on type of TAIFUN)

Warning signs and light

Warning signs are available front and rear. Symbolic image (depends on type of TAIFUN)

Front round rod - / rear serrated roller

1-row weeder tines Ø 12 mm incl. 4 support wheels (18x8.5-8) at rigid version only 2 support wheels

Ring packer roller Ø 470 mm with spring stripper between the rings

Ring packer roller Ø 575 mm with spring stripper between the rings

Flat rod roller

Good crumbling on medium soil

Round rod roller

Good crumbling on medium soil and good load capacity on light soil

Front flat rod – / rear serrated roller

Good crumbling on heavy soil

Front round rod - / rear serrated roller

Good crumbling on medium to heavy soil, good load capacity on sandy soil

1-row weeder tines Ø 12 mm incl. 4 support wheels (18x8.5-8) at rigid version only 2 support wheels

Instead of rollers it is possible to work with a single-row weeder in combination with support wheels

Ring packer roller Ø 470 mm with spring stripper between the rings

The wedge-shaped reconsolidation roller compacts the soil in deeper areas and closes all cavities while the topsoil stays loose and is finely crumbled. Its high load capacity makes it suitable for all different types of soil. Spring scrapers between the rings help to avoid blockage.

Trailed weeder tines

The standard two-row trailed weeder on the F, R, FZ, RZ or RP 47 roller can be replaced on request by a single-row weeder.

For trailed TAIFUN

Ring packer roller Ø 575 mm with spring stripper between the rings

Similar to RP 47, but with a diameter of 575 mm for high load capacity with heavy machines. The single-row weeder is standard at 8, 9 und 12 m working width.

Double-Nova-roller Ø 575 mm

Through the U-steel rings, which are getting filled with soil on purpose, soil rolls on soil. This soil-conserving reconsolidation ensures a rough surface structure. Because of its high load capacity it is suited perfectly for all soil conditions. The single-row weeder is standard at 8, 9 und 12 m working width.

Further rollers on request

Spring tines

Better mixing, self-cleaning and soil extraction of the weed root. Creating an optimal soil structure (fine soil – heavy soil)

Spring tines

Better mixing, self-cleaning and soil extraction of the weed root. Creating an optimal soil structure (fine soil – heavy soil)

TAIFUN trailed 8m, 9m and 12m

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Sophisticated folding mechanism

In spite of its size, the semi-mounted TAIFUN fold to a transport width of only 3 m with a sophisticated folding mechanism. The mass centre is in front of the chassis, so there is more pressure on the rear axle of the towing vehicle.

Sophisticated folding mechanism

Cultivator TAIFUN

A classic for glyphosate-free farming
Ultra-shallow soil cultivation
Universally applicable

Full-area cutting possible
Specifically improving the soil quality
Various machine configurations possible

Cultivator TAIFUN

Cultivator
TAIFUN

A classic for glyphosate-free farming
Ultra-shallow soil cultivation
Universally applicable

Full-area cutting possible
Specifically improving the soil quality
Various machine configurations possible

The Einböck universal cultivator TAIFUN is a multi-purpose, highly efficient machine. The TAIFUN is a classic machine for seedbed preparation due to its high and spacious frame construction – especially for areas with winter greening. The incorporation of liquid manure and organic fertilizer, as well as light stubble turning or second stubble cultivation and the combat of couch grass are ideal jobs for the TAIFUN.

To the seedbed cultivator VIBROSTAR or universal cultivator HURRICANE!

Leichtgrubber-TAIFUN-Slider1-Federzinkengrubber-Stoppelsturz.JPG

Leichtgrubber-TAIFUN-Slider2-Federzinkengrubber-Stoppelsturz.JPG

Leichtgrubber-TAIFUN-Slider3-Federzinkengrubber-Stoppelsturz.JPG

Leichtgrubber-TAIFUN-Sliderneu1.2-Federzinkengrubber-Stoppelsturz.JPG

Leichtgrubber-TAIFUN-Slider5-Federzinkengrubber-Stoppelsturz.JPG

Concept

Advantages

Technical data

Options

Media

Concept cultivator TAIFUN

4-beam construction
Various tines and sweeps
15 cm / 5,9'' line spacing; 60 cm / 23,6'' line distance
Clearance up to 580 mm / 22,8''
Double drag tines
Working depth easily adustable via half breadboard
Large selection of rear rollers and trailed weeder tines

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

4-beam construction
Various tines and sweeps
15 cm / 5,9'' line spacing; 60 cm / 23,6'' line distance
Clearance up to 580 mm / 22,8''
Double drag tines
Working depth easily adustable via half breadboard
Large selection of rear rollers and trailed weeder tines

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

Advantages cultivator TAIFUN

Tube-in-tube construction

The tube-in-tube construction of the frame guarantees longevity and stability.

Tube-in-tube construction

The tube-in-tube construction of the frame guarantees longevity and stability.

Big frame clearance

The big frame clearance (up to 580 mm) guarantees clogg free working and a perfect work result even in a big amount of organic matter.

Big frame clearance

The big frame clearance (up to 580 mm) guarantees clogg free working and a perfect work result even in a big amount of organic matter.

100% even tine allocation

An even tine allocation ensures clogg free working, full area cutting of the surface and a calm dragging behaviour.

100% even tine allocation

An even tine allocation ensures clogg free working, full area cutting of the surface and a calm dragging behaviour.

2 folding cylinders

Two folding cylinders provide a triangular strut and even folding on both sides. This is useful in hilly terrain. Both cylinders are latched by lock-blocks.

2 folding cylinders

Two folding cylinders provide a triangular strut and even folding on both sides. This is useful in hilly terrain. Both cylinders are latched by lock-blocks.

Lubricatable joint bearings with hardened bushings

Lower links and upper links with rotation locks and hardened bushings

Lubricatable joint bearings with hardened bushings

Lower links and upper links with rotation locks and hardened bushings

Working depth precisely adjustable

Tool-free adjustable and spring-mounted double drag tines

Spring tines

Better mixing, self-cleaning and soil extraction of the weed root. Creating an optimal soil structure (fine soil – heavy soil)

Spring tines

Better mixing, self-cleaning and soil extraction of the weed root. Creating an optimal soil structure (fine soil – heavy soil)

TAIFUN trailed 8m, 9m and 12m

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Sophisticated folding mechanism

Technical data cultivator TAIFUN

Taifun 2,5 m – 7 m

Large spring tine Vulcanus 50x13, 525 mm clearance with standard share 53 mm
Solid frame construction
Tine arrangement on 4-beams
Line spacing 15 cm
Spring double drag tines between the last tine row and the rear roller – demountable without tools
Parking position for double drag tine on the frame, when they are not in use
Rear rollers parallelogram-guided and height adjustable in the half breadboard
All rollers with ball-bearings
Transport width 2.60 m
One double-acting hydraulic valve is required
Mounting CAT II+III with hardened bushings

Type/ Working width cm	Double drag tines	No. of beams/ tines	Mounting category	HP/kW	Weight approx. kg
TAIFUN 250 F ¹	4	4/17	II	70/52	940
TAIFUN 250 R ¹	4	4/17	II	70/52	960
TAIFUN 250 ST ¹	4	4/17	II	70/52	850
TAIFUN 250 FZ ¹	4	4/17	II	70/52	1.070
TAIFUN 250 RZ ¹	4	4/17	II	70/52	1.090
TAIFUN 250 RP 47 ^1,4	4	4/17	II	70/52	1.130

TAIFUN 300 F ¹	5	4/20	II	90/66	1.050
TAIFUN 300 R ¹	5	4/20	II	90/66	1.070
TAIFUN 300 ST ¹	5	4/20	II	90/66	960
TAIFUN 300 FZ ¹	5	4/20	II	90/66	1.130
TAIFUN 300 RZ ¹	5	4/20	II	90/66	1.240
TAIFUN 300 RP 47 ^1,4	5	4/20	II	90/66	1.250

TAIFUN 400 F	6	4/26	II+III	110/81	1.660
TAIFUN 400 R	6	4/26	II+III	110/81	1.690
TAIFUN 400 ST	6	4/26	II+III	110/81	1.530
TAIFUN 400 FZ	6	4/26	II+III	110/81	1.880
TAIFUN 400 RZ	6	4/26	II+III	110/81	1.900
TAIFUN 400 RP 47 ⁴	6	4/26	II+III	110/81	1.960

TAIFUN 500 F	8	4/34	II+III	130/95	1.880
TAIFUN 500 R	8	4/34	II+III	130/95	1.920
TAIFUN 500 ST	8	4/34	II+III	130/95	1.740
TAIFUN 500 FZ	8	4/34	II+III	130/95	2.140
TAIFUN 500 RZ	8	4/34	II+III	130/95	2.190
TAIFUN 500 RP 47 ⁴	8	4/34	II+III	130/95	2.260

TAIFUN 600 F	10	4/40	II+III	160/118	2.050
TAIFUN 600 R	10	4/40	II+III	160/118	2.090
TAIFUN 600 ST	10	4/40	II+III	160/118	1.880
TAIFUN 600 FZ	10	4/40	II+III	160/118	2.370
TAIFUN 600 RZ	10	4/40	II+III	160/118	2.400
TAIFUN 600 RP 47 ⁴	10	4/40	II+III	160/118	2.450

TAIFUN 700 F	12	4/46	II+III	190/140	2.490
TAIFUN 700 R	12	4/46	II+III	190/140	2.570
TAIFUN 700 ST	12	4/46	II+III	190/140	2.260
TAIFUN 700 FZ	12	4/46	II+III	190/140	2.880
TAIFUN 700 RZ	12	4/46	II+III	190/140	2.920
TAIFUN 700 RP 47 ⁴	12	4/46	II+III	190/140	3.000

¹ rigid, not foldable

² semi-mounted

³ Attention: Transport height approx. 4,30 m

⁴ if semi-mounted, RP 58 recommended (instead of RP 47)

Rear roller:

F Flat rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

R Round rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

ST 1-row weeder tines, ø 12 mm incl. 4 support wheels (18x8.5-8) (if rigid only 2 support wheels)

FZ Front flat rod roller ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RZ Front round rod ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RP 47 Ring packer roller ø 470 mm with leveller and trailed weeder tines, 2-rows, ø 10 mm

RP 58 Ring packer roller ø 575 mm with leveller and trailed weeder tines, 1-row, ø 12 mm

DN Double nova roller ø 575 mm

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types

Spring Tine Vulcanus 50x13 mm, clearance 525 mm'

The strong spring tines Vulcanus, made from high-quality spring steel and mounted on four beams, are designed for long service life.

Narrow share

The narrow share (standard equipment) is 53 mm wide and is recommended for operations deeper than 10 cm

Duckfoot sweep

The duckfoot sweep with a width of 200 mm is suitable for complete tillage of the full surface in low depth.

Both shares are 6 mm thick.

Spring Tine Vulcanus 50x13 mm, clearance 525 mm'

The strong spring tines Vulcanus, made from high-quality spring steel and mounted on four beams, are designed for long service life.

Narrow share

The narrow share (standard equipment) is 53 mm wide and is recommended for operations deeper than 10 cm

Duckfoot sweep

The duckfoot sweep with a width of 200 mm is suitable for complete tillage of the full surface in low depth.

Both shares are 6 mm thick.

TAIFUN trailed 8m, 9m and 12m

Hercules tine 70x12, 580 mm clearance
Heavy frame, semi-mounted
Coupling CAT III with hardened bushings.
Both sides guided lower link pins
Drawbar adjustable in length and holder for hydr. hoses
Tine arrangement on 4-beams
Line spacing 15 cm
Spring double drag tines between the last tine row and the rear roller – demountable without tools
Adjustment of the working depth via with half-hole grid breadboard on the rear roller
All rollers with ball-bearings
Parking position for double drag tines
Parking support with wheel chocks
3 double-acting hydraulic valves necessary
Front support wheel - height adjustable
Braking axle for mounting of air brake

TAIFUN 800 RP 58 ²	13	4/54	III	200/147	7.500
TAIFUN 800 DN ²	13	4/54	III	200/147	7.750
TAIFUN 900 RP 58 ^2,3	15	4/60	III	240/176	7.900
TAIFUN 900 DN ^2,3	15	4/60	III	240/176	8.180
TAIFUN 1200 RP 58 ²	20	4/80	III	340/250	9.200
TAIFUN 1200 DN ²	20	4/80	III	340/250	9.550

¹ rigid, not foldable

² semi-mounted

³ Attention: Transport height approx. 4,30 m

⁴ if semi-mounted, RP 58 recommended (instead of RP 47)

Spring Tine Herkules 70x12 mm, clearance 580 mm

The sweep is mounted with two bolts, this is a big advantage in stony and heavy conditions.

Spring Tine Herkules 70x12 mm, clearance 580 mm

The sweep is mounted with two bolts, this is a big advantage in stony and heavy conditions.

The right roller

Flat rod roller

Good crumbling on medium soil

Round rod roller

Good crumbling on medium soil and good load capacity on light soil

Front flat rod – / rear serrated roller

Good crumbling on heavy soil

Front round rod - / rear serrated roller

Good crumbling on medium to heavy soil, good load capacity on sandy soil

1-row weeder tines Ø 12 mm incl. 4 support wheels (18x8.5-8) at rigid version only 2 support wheels

Instead of rollers it is possible to work with a single-row weeder in combination with support wheels

Ring packer roller Ø 470 mm with spring stripper between the rings

Trailed weeder tines

The standard two-row trailed weeder on the F, R, FZ, RZ or RP 47 roller can be replaced on request by a single-row weeder.

For trailed TAIFUN

Ring packer roller Ø 575 mm with spring stripper between the rings

Similar to RP 47, but with a diameter of 575 mm for high load capacity with heavy machines. The single-row weeder is standard at 8, 9 und 12 m working width.

Double-Nova-roller Ø 575 mm

Further rollers on request

Options cultivator TAIFUN

TAIFUN 2,5m - 7m

Semi-trailed version with chassis instead of mounted version (standard weight + 1 150 kg)
Brake axle for mounting of air brake
Air compressor
Steerable support wheels running in front of the wing (only for TAIFUN 600 and 700)
Protection cover for tines for street transportation on both sides
Steps for filling
Spring-tine Herkules

TAIFUN trailed 8m, 9m and 12m