cultivator TAIFUN - universally applicable

advantages cultivator TAIFUN

technical data cultivator TAIFUN

Taifun 2,5 m – 7 m rigid or hydraulically folding

  • Large spring tine Vulcanus 50x13, 525 mm clearance with standard share 53 mm
  • Solid frame construction
  • Tine arrangement on 4-beams
  • Line spacing 15 cm
  • Spring double drag tines between the last tine row and the rear roller – demountable without tools
  • Parking position for double drag tine on the frame, when they are not in use
  • Rear rollers parallelogram-guided and height adjustable in the half breadboard
  • All rollers with ball-bearings
  • Transport width 2.60 m
  • One double-acting hydraulic valve is required
  • Mounting CAT II+III with hardened bushings

options cultivator TAIFUN

  • Semi-trailed version with chassis instead of mounted version (standard weight + 1 150 kg)
  • Brake axle for mounting of air brake
  • Air compressor
  • Steerable support wheels running in front of the wing (only for TAIFUN 600 and 700)
  • Protection cover for tines for street transportation on both sides
  • Steps for filling

 

TAIFUN 8m – 9m -12m

  • VIBRO-BOARD, hydraulically adjustable
  • Duckfoot sweep 200 mm instead of or additionally to the standard share
  • Protection cover for tines for road transport on both sides
brochures cultivator TAIFUN
brochures cultivator TAIFUN
Downloads Downloads

Simple seeding of cover crops

With the P-BOX-MD or the P-BOX-STI it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. (steht nicht auf der Homepage) Depending on the seeding rate and - speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.

The seed is conveyed pneumatically via hoses to the distribution plates which spread the seeds precisely. Depending on the version of the box the metering roller is driven by an electric motor or mechanically by a flexible cable with various ground drive variants.

Simple seeding of cover crops

With the P-BOX-MD or the P-BOX-STI it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. (steht nicht auf der Homepage) Depending on the seeding rate and - speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.

The seed is conveyed pneumatically via hoses to the distribution plates which spread the seeds precisely. Depending on the version of the box the metering roller is driven by an electric motor or mechanically by a flexible cable with various ground drive variants.

videos cultivator TAIFUN

Levelling plate „dragging“ or „on hold“

The levelling plate is clamped on the front of the frame and can be adjusted in height through bolts. The levelling plate crushes clods and can be adjusted “dragging” or “on hold”. It levels the soil and covers the tractor-track. The operation of the working tools is extremely smooth and the working depth is maintained exactly. In spring the levelling plate is especially recommended for seedbed preparation.

Levelling plate „dragging“ or „on hold“

The levelling plate is clamped on the front of the frame and can be adjusted in height through bolts. The levelling plate crushes clods and can be adjusted “dragging” or “on hold”. It levels the soil and covers the tractor-track. The operation of the working tools is extremely smooth and the working depth is maintained exactly. In spring the levelling plate is especially recommended for seedbed preparation.

Pivoting Sideplate

The parallelogram-guided sideplate prevents ridging during seedbed preparation.

Pivoting Sideplate

The parallelogram-guided sideplate prevents ridging during seedbed preparation.

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

Support wheels 18x8.5-8

To ensure an equal working depth over the entire working width during stubble operation on uneven ground, support wheels are available. They ensure smooth operation in hilly terrain or very shallow working depth.

Support wheels 18x8.5-8

To ensure an equal working depth over the entire working width during stubble operation on uneven ground, support wheels are available. They ensure smooth operation in hilly terrain or very shallow working depth.

Chassis

For the TAIFUN with heavy rollers we recommend a chassis instead of the mounted version, since the heavy weight of the machine might harm the 3-point linkage of the tractor and increases soil compaction on the headland.

Chassis

For the TAIFUN with heavy rollers we recommend a chassis instead of the mounted version, since the heavy weight of the machine might harm the 3-point linkage of the tractor and increases soil compaction on the headland.

Warning signs and lights are available as options.

During operation they can be pivoted to the front in order to protect them against swirling stones.

Warning signs and lights are available as options.

During operation they can be pivoted to the front in order to protect them against swirling stones.

The right roller

Flat rod roller

Good crumbling on medium soil

 

Round rod roller

Good crumbling on medium soil and good load capacity on light soil

 

Front flat rod – / rear serrated roller

Good crumbling on heavy soil

 

Front round rod - / rear serrated roller

Good crumbling on medium to heavy soil, good load capacity on sandy soil

 

1-row weeder tines Ø 12 mm incl. 4 support wheels (18x8.5-8) at rigid version only 2 support wheels

Instead of rollers it is possible to work with a single-row weeder in combination with support wheels

 

Ring packer roller Ø 470 mm with spring stripper between the rings

The wedge-shaped reconsolidation roller compacts the soil in deeper areas and closes all cavities while the topsoil stays loose and is finely crumbled. Its high load capacity makes it suitable for all different types of soil. Spring scrapers between the rings help to avoid blockage.

 

Trailed weeder tines

The standard two-row trailed weeder on the F, R, FZ, RZ or RP 47 roller can be replaced on request by a single-row weeder.

 

for the semi-mounted TAIFUN

Ring packer roller Ø 575 mm with spring stripper between the rings

Similar to RP 47, but with a diameter of 575 mm for high load capacity with heavy machines. The single-row weeder is standard at 8, 9 und 12 m working width.

 

Double-Nova-roller Ø 575 mm

Through the U-steel rings, which are getting filled with soil on purpose, soil rolls on soil. This soil-conserving reconsolidation ensures a rough surface structure. Because of its high load capacity it is suited perfectly for all soil conditions. The single-row weeder is standard at 8, 9 und 12 m working width.

 

Further rollers on request

 

Type/

Working width cm

Double drag tines

No. of beams/

tines

Mounting

category

HP/kW

Weight

approx. kg

TAIFUN 250 F 1

4

4/17

II

70/52

940

TAIFUN 250 R 1

4

4/17

II

70/52

960

TAIFUN 250 ST 1

4

4/17

II

70/52

850

TAIFUN 250 FZ 1

4

4/17

II

70/52

1.070

TAIFUN 250 RZ 1

4

4/17

II

70/52

1.090

TAIFUN 250 RP 47 1,4

4

4/17

II

70/52

1.130

 

 

 

 

 

 

TAIFUN 300 F 1

5

 

4/20

II

90/66

1.050

TAIFUN 300 R 1

5

4/20

II

90/66

1.070

TAIFUN 300 ST 1

5

4/20

II

90/66

960

TAIFUN 300 FZ 1

5

4/20

II

90/66

1.130

TAIFUN 300 RZ 1

5

4/20

II

90/66

1.240

TAIFUN 300 RP 47 1,4

5

4/20

II

90/66

1.250

 

 

 

 

 

 

TAIFUN 400 F

6

 

4/26

II+III

110/81

1.660

TAIFUN 400 R

6

4/26

II+III

110/81

1.690

TAIFUN 400 ST

6

4/26

II+III

110/81

1.530

TAIFUN 400 FZ

6

4/26

II+III

110/81

1.880

TAIFUN 400 RZ

6

4/26

II+III

110/81

1.900

TAIFUN 400 RP 47 4

6

4/26

II+III

110/81

1.960

 

 

 

 

 

 

TAIFUN 500 F

8

 

4/34

II+III

130/95

1.880

TAIFUN 500 R

8

4/34

II+III

130/95

1.920

TAIFUN 500 ST

8

4/34

II+III

130/95

1.740

TAIFUN 500 FZ

8

4/34

II+III

130/95

2.140

TAIFUN 500 RZ

8

4/34

II+III

130/95

2.190

TAIFUN 500 RP 47 4

8

4/34

II+III

130/95

2.260

 

 

 

 

 

 

TAIFUN 600 F

10

 

4/40

II+III

160/118

2.050

TAIFUN 600 R

10

4/40

II+III

160/118

2.090

TAIFUN 600 ST

10

4/40

II+III

160/118

1.880

TAIFUN 600 FZ

10

4/40

II+III

160/118

2.370

TAIFUN 600 RZ

10

4/40

II+III

160/118

2.400

TAIFUN 600 RP 47 4

10

4/40

II+III

160/118

2.450

 

TAIFUN 700 F

12

 

4/46

II+III

190/140

2.490

TAIFUN 700 R

12

4/46

II+III

190/140

2.570

TAIFUN 700 ST

12

4/46

II+III

190/140

2.260

TAIFUN 700 FZ

12

4/46

II+III

190/140

2.880

TAIFUN 700 RZ

12

4/46

II+III

190/140

2.920

TAIFUN 700 RP 47 4

12

4/46

II+III

190/140

3.000

 

TAIFUN 800 RP 58 2

13

4/54

III

200/147

7.500

TAIFUN 800 DN 2

13

4/54

III

200/147

7.750

TAIFUN 900 RP 58 2,3

15

4/60

III

240/176

7.900

TAIFUN 900 DN 2,3

15

4/60

III

240/176

8.180

TAIFUN 1200 RP 58 2

20

4/80

III

340/250

9.200

TAIFUN 1200 DN 2

20

4/80

III

340/250

9.550

 

1            rigid, not foldable

2            semi-mounted

3            Attention: Transport height approx. 4,30 m

4            if semi-mounted, RP 58 recommended (instead of RP 47)

 

Rear roller:

F            Flat rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

R           Round rod roller ø 400 mm and trailed weeder tines, 2-rows, ø 10 mm

ST          1-row weeder tines, ø 12 mm incl. 4 support wheels (18x8.5-8) (if rigid only 2 support wheels)

FZ          Front flat rod roller ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RZ          Front round rod ø 400 mm, rear serrated roller ø 320 mm and trailed weeder tines, 2-rows, ø 10 mm

RP 47    Ring packer roller ø 470 mm with leveller and trailed weeder tines, 2-rows, ø 10 mm

RP 58    Ring packer roller ø 575 mm with leveller and trailed weeder tines, 1-row, ø 12 mm

DN        Double nova roller ø 575 mm

 

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types

 

High frame clearance

The high frame clearance ensures operation without clogging, especially in fields with high residue or organic matter.

High frame clearance

The high frame clearance ensures operation without clogging, especially in fields with high residue or organic matter.

Exact adjustment of working depth

Adjustment of working depth via bolts in a breadboard. With the spindle either the pressure distribution on the rollers or the angle of following weeder tines to the soil can be adjusted. The full pressure is transferred to the rear roller. This ensures a very smooth operation of the machine.

Exact adjustment of working depth

Adjustment of working depth via bolts in a breadboard. With the spindle either the pressure distribution on the rollers or the angle of following weeder tines to the soil can be adjusted. The full pressure is transferred to the rear roller. This ensures a very smooth operation of the machine.

TAIFUN 8m – 9m -12m hydraulically folding and semi-mounted

  • Hercules tine 70x12, 580 mm clearance
  • Heavy frame, semi-mounted
  • Coupling CAT III with hardened bushings.
  • Both sides guided lower link pins
  • Drawbar adjustable in length and holder for hydr. hoses
  • Tine arrangement on 4-beams
  • Line spacing 15 cm
  • Spring double drag tines between the last tine row and the rear roller – demountable without tools
  • Adjustment of the working depth via with half-hole grid breadboard on the rear roller
  • All rollers with ball-bearings
  • Parking position for double drag tines
  • Parking support with wheel chocks
  • 3 double-acting hydraulic valves necessary
  • Front support wheel - height adjustable
  • Braking axle for mounting of air brake
  1. various tines / shares
  2. Tine arrangement on 4-beams
  3. Big range of rear rollers
  4. spring loaded double drag tines
  5. working depth easily adjustable in the half breadboard

 

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

  1. various tines / shares
  2. Tine arrangement on 4-beams
  3. Big range of rear rollers
  4. spring loaded double drag tines
  5. working depth easily adjustable in the half breadboard

 

The photos and illustrations show possible variants and some special versions. The actual machine configuration may differ from these illustrations.

Lock-blocks on hydr. cylinders

Because of the lock-blocks on the hydr. cylinders complicated mechanical locking systems are not necessary.

Lock-blocks on hydr. cylinders

Because of the lock-blocks on the hydr. cylinders complicated mechanical locking systems are not necessary.

Spring Tine Vulcanus 50x13 mm, clearance 525 mm

The spring tine Vulcanus (standard) is made from 50x13 mm spring steel (clearance 525 mm). The Vulcanus tine is recommended for light and medium soil for seedbed preparation after ploughing up to a working depth of 15 cm. For this operation the use of duckfoot shares up to a working depth of 10 cm is also possible.

The strong spring tines Vulcanus, made from high-quality spring steel and mounted on four beams, are designed for long service life.

 

Spring Tine Herkules 70x12 mm, clearance 580 mm

The Herkules tine (option) is made of 70x12 mm spring tine steel (clearance 580 mm). The tine is recommended for seedbed preparation after ploughing up to a working depth of 15 cm in heavy soil (also stones). For this operation a use of duckfoot shares is also possible. This tine is also recommended for the first stubble operation in light and medium soil up to a working depth of 6 cm. – dieser Text steht nicht in der deutschen Version!

 

Narrow share

The narrow share (standard equipment) is 53 mm wide and is recommended for operations deeper than 10 cm.

 

Duckfoot sweep

The duckfoot sweep with a width of 200 mm is suitable for complete tillage of the full surface in low depth.

 

Both shares are 6 mm thick.

 

The Taifun is also known as the spring tine cultivator.

 

Spring loaded double drag tines

Springmounted double drag tines between the last tine row and the rear roller ensure perfect tillage and guarantee an exact levelling. Ridges which are caused by the last tine row are levelled in front of the rear roller to ensure the rear roller can reconsolidate the soil evenly over the total width. The double drag tines can be removed very easily without any tool what might be necessary for stubble working or when there is a lot of residue in the field, for example straw. There is a parking position for these tines on the frame.

Spring loaded double drag tines

Springmounted double drag tines between the last tine row and the rear roller ensure perfect tillage and guarantee an exact levelling. Ridges which are caused by the last tine row are levelled in front of the rear roller to ensure the rear roller can reconsolidate the soil evenly over the total width. The double drag tines can be removed very easily without any tool what might be necessary for stubble working or when there is a lot of residue in the field, for example straw. There is a parking position for these tines on the frame.

TAIFUN semi-mounted 8m – 9m -12m

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Enormous area efficiency is possible

For large-scale farms the TAIFUN is available with 8 m, 9 m and 12 m working width.

Sophisticated folding mechanism

In spite of its size, the semi-mounted TAIFUN fold to a transport width of only 3 m with a sophisticated folding mechanism. The mass centre is in front of the chassis, so there is more pressure on the rear axle of the towing vehicle.

Sophisticated folding mechanism

In spite of its size, the semi-mounted TAIFUN fold to a transport width of only 3 m with a sophisticated folding mechanism. The mass centre is in front of the chassis, so there is more pressure on the rear axle of the towing vehicle.

Cultivator TAIFUN

  • Universally applicable
  • Full-surface cut (depending on shares)
  • Improves specifically soil quality
  • For optimal crumbling and reconsolidation
  • Effective operation on small and large areas
  • Tine arrangement on 4 beams

Cultivator TAIFUN

Cultivator
TAIFUN

  • Universally applicable
  • Full-surface cut (depending on shares)
  • Improves specifically soil quality
  • For optimal crumbling and reconsolidation
  • Effective operation on small and large areas
  • Tine arrangement on 4 beams

The Einböck universal cultivator TAIFUN is a multi-purpose, highly efficient machine. The TAIFUN is a classic machine for seedbed preparation due to its high and spacious frame construction – especially for areas with winter greening. The incorporation of liquid manure and organic fertilizer, as well as light stubble turning or second stubble cultivation and the combat of couch grass are ideal jobs for the TAIFUN.

conceptconceptconcept
advantagesadvantagesadvantages
technical datatechnical datatechnical data
optionsoptionsoptions
mediamediamedia
TOP