Seedbed cultivator VIBROSTAR

Frame with 4-rows of tines

1. 4-row frame structure with 10 cm / 3.90" line spacing and 36.5/42 cm (14.40/16.50") spacing between beams
2. Levelling plate or front roller (front crumbler up to 6.1 m / 20 ft. working width)
3. Different rear rollers and roller diameters (serrated, flat steel, round-rod)
4. Trailed weeder tines 1- or 2-row

Frame with 5-rows of tines

1. 5-row frame structure with 10 cm / 3.90" line spacing and 36.5/39 cm (14.40/15.40") spacing between beams
2. Levelling plate or VIBRO-BOARD
3. Different rear rollers and roller diameters (serrated, flat steel, round-rod)
4. Ring packer roller
5. Trailed weeder tines 1- or 2-row

Big variety of different specifications
The large number of different levelling tools in combination with various tines, sweeps and trailed weeder tines make the VIBROSTAR to a fine cultivator that can be individually adapted to the respective conditions and purposes. In this way, the best specification to achieve the desired result can be found.

Finest seedbed preparation
Even seedbed preparation and levelling on ploughed or mulch-till fields with organic matter. Ideal for seedbed preparation even on compacted soil, as clods are placed on the surface and fine soil is placed in the seed layer. The different rollers for precise depth control ensure excellent mixing as well as crumbling.

Sufficient clearance
Up to 52 cm / 20.50" of clearance (depending on working depth and choice of tines) ensure operation without blocking.

10 cm / 3.90" line spacing ensures perfect weed control
In order to cut through the entire surface, when equipped with heavy S-tines,

105 mm / 4.13" wide duckfoot sweeps can be fitted. These provide sufficient overlap at 100 mm / 3.94" line spacing to ensure working over the full surface.

VIBRO-BOARD for best working quality
A hydraulically adjustable VIBRO-BOARD ensures initial levelling in front of the tines as well as breaking up and crushing of the clods. This way, the foundation for excellent working quality of the seedbed cultivator is already ensured by the first working tool.

Available for VIBROSTAR XXL and VIBROSTAR 5-...

Levelling plate for perfect flat surface
The levelling plate, adjustable in height and angle, levels the surface. The cultivator's working tools are guided smoothly during operation. By adjusting it on "dragging" or "on grip" position, it crushes the clods and levels it out. The levelling plate is recommended especially for seedbed preparation on ploughed fields in spring. In combination with the front roller, this plate is standard.

Simple working depth adjustment

The working depth is adjusted by means of bolts in a breadboard. With the  spindle, the downforce on the rollers can be adjusted to the specific conditions. The result is a reconsolidated seedbed with an optimally crumbly structure.
Even in heavy soil conditions, the cultivator guarantees optimum penetration and an exact constant working depth. The vibrating spring tines cultivate and aerate the soil at any desired working depth. They vibrate as well in the direction of operation as laterally, thus ensures that the desired working depth is maintained at all times.

Flat seedbed preparation with front roller
In some working widths (see table: Technical data), the VIBROSTAR seedbed cultivator is also available as an implement with front roller. This makes the machine ideal for very shallow seedbed preparation (e.g. for sugar beets). For improved depth control, the height of the front roller can be adjusted precisely and easily by means of bolts in a breadboard.

Uncomplicated seeding of catch crops
For seeding of catch crops, a pneumatic seeding box (P-BOX-STI) can be installed or retrofitted at any time. The distribution plates are factory-fitted in front of the trailing rollers (but can also be positioned differently on request).

 „100 % made by EINBÖCK in AUSTRIA“

• In-house development from the idea to serial production
  We have over 85 years experience in designing of agricultural machinery.
• From practitioner for practitioner 
  75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
• Suppliers from the region and Central Europe
  Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

• Manufacturing exclusively in Dorf an der Pram in Upper Austria
  Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
• Practical testing of all machines on our own test fields
  Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
• After-sales service
  A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.

1 ZW: 1-ROW SERRATED CRUMBLER Ø 320 mm / 12.60"
For medium to light soil conditions

2 ZW: 2-ROW SERRATED CRUMBLER Ø 320 mm / 12.60" Ø 280 mm / 11.02"
For medium to heavy soil conditions

1 F: 1-ROW FLAT STEEL CRUMBLER Ø 380 mm / 14.96"
For medium soil conditions

2 FZ: 2-ROW CRUMBLER, 1st ROW FLAT STEEL Ø 380 mm / 14.96", 2nd ROW SERRATED CRUMBLER Ø 320 mm / 12.60"
For medium soil conditions

1 R: 1-ROW ROUND ROD CRUMBLER Ø 380 mm / 14.96"
For medium to light soil conditions, in wet conditions, with stones

2 RZ: 2-ROW CRUMBLER, 1st ROW ROUND ROD Ø 380 mm / 14.96", 2nd ROW SERRATED CRUMBLER Ø 320 mm / 12.60"
For medium to light soil conditions, for sandy and wet conditions.

2 R: 2-ROW ROUND ROD CRUMBLER Ø 380 mm / 14.96" Ø 380 mm / 14.96"
(only available for VIBROSTAR XXL)
For medium to light soil conditions, for sandy, stony and wet conditions.

2 RF: 2-ROW ROLLER, 1st ROW ROUND ROD Ø 380 mm / 14.96", 2nd ROW FLAT ROD Ø 380 mm / 14.96"
(only available for VIBROSTAR XXL)
For medium to light soil conditions

RP 47: Ring packer roller Ø 470 mm / 18.50" with 2-row trailed weeder tines
(only available for VIBROSTAR 5-rows)
Wedge-shaped reconsolidation on all soil types for a fine soilstructure.

2 ST: 2-ROW TRAILED WEEDER TINES WITH Ø 10 mm / 0.39" INSTEAD OF CRUMBLER
(only available for VIBROSTAR 5-rows)
Without rear roller - no reconsolidation of the soil
For very wet, sandy or stony soil conditions.

There are 4 support wheels mounted on the frame - as standard.

Solid three-point mounting
The 3-point mounting is equipped with hardened bushings and the lower links are guided on both sides.

Standard S-tine
Standard S-tine material 32x10 mm / 1.26x0.39"
For medium to light soil conditions - recommended in ploughed fields. This tine is available for VIBROSTAR 4-... and VIBROSTAR 5-... as standard and has a frame clearance of 400 mm / 15.75". These are equipped with narrow shares.

Transport position
All models are folded hydraulically to a transport width of less than 3 m / 9.80 ft.

The VIBROSTAR XXL has a transport width of 3.5 m / 11.50 ft.

Standard S-tine with reinforcement spring

Material 32x10 mm / 1.26x0.39" + 32x8 mm / 1.26x0.31"
For medium to heavy, stony soil conditions - can be used after ploughing.

Heavy S-tine
Material 45x12 mm / 1.77x0.47" - For all soil conditions, can be used after ploughing (for spring use, for incorporation of winter greening, etc.). This tine is mounted as standard on VIBROSTAR F-4-....

Special tine straight
Material 45x12 mm / 1.77x0.47" - For medium to light soil conditions (corn and beet cultivation), especially in stony soil conditions.

Track loosener height adjustable

with duckfoot sweep 105 mm / 4.13"
Material 32x10 mm / 1.26x0.39" + 32x10 mm / 1.26x0.39"

Duckfoot sweep 70 mm / 2.76" or 105 mm / 4.13" (only possible with heavy S-tine)

Duckfoot sweeps with 70 mm / 2.76" or 105 mm / 4.13" width can be mounted on heavy S-tines to nearly cut the full surface (Depending on soil type).

Rubber support wheels for uniform depth control

Depending on the version, rubber support wheels are available (standard on VIBROSTAR XXL).

VIBRO-BOARD
Mounted on the frame of a trailed VIBROSTAR XXL or 5-row VIBROSTAR, this VIBRO-BOARD is easy to operate from the tractor thanks to its hydraulic adjustment and ensures levelling before the first row of tines.

Levelling plate
In order to level the ground before the first row of tines, optional levelling plates can be mounted, which can be adjusted at an angle.

(Standard at VIBROSTAR F-4-...)

Warning signs with holder and LED lights

These are available for the VIBROSTAR to the front and/or to the rear (symbol image - variants vary depending on the design).