Optionsfront rollerFRONT-SPIKE
- Hydraulic steering
- Hydraulic hose extension the rear of the tractor
- Side plates adjustable
- Warning signs with holder and LED-lights
- Pneumatic seeding box (P-Box-MD or P-Box-STI)
Technical datafront rollerFRONT-SPIKE
- Rigid frame or mechanical steering
- Lower links guided on both sides
- Spike disc arrangement 3 rows
- Spring mounted dragging tines, 1 row
- Spike disc ø 400 mm
- Mounting category CAT II
Type/ working width cm | from HP/kW | Weight kg approx. |
FRONT-SPIKE 250 | 95/70 | 850 |
FRONT-SPIKE 300 | 110/80 | 960 |
Technical data are approximate and not legally binding. We reserve the right to alter construction and models.

Turnbuckle
In its basic version the implement is rigid, but by removing a turnbuckle the machines can easily be reset to mechanical steering.

Turnbuckle
In its basic version the implement is rigid, but by removing a turnbuckle the machines can easily be reset to mechanical steering.
You can’t find the right photo?
We have a big range of photos in various perspectives and cultures. Contact us here!

- Rigid, mechanical or hydraulic steering
- The frame is constructed to allow for a possible additional load
- Spike disc arrangements 3 rows
- spring mounted dragging tine 1 row
The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

- Rigid, mechanical or hydraulic steering
- The frame is constructed to allow for a possible additional load
- Spike disc arrangements 3 rows
- spring mounted dragging tine 1 row
The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.
Individual steerability
The FRONT-SPIKE is rigid, mechanical or hydraulic steering.


Individual steerability
The FRONT-SPIKE is rigid, mechanical or hydraulic steering.

Hydraulic Steering
A hydraulic steering, instead of the rigid version, is available for both types at a surcharge. The hydraulic steering should be ordered for the FRONT-STAR, if the machine is weighted with a dual-active front hydraulic. This steering isn’t coupled with the tractor steering, but it must be implemented with the control unit. If no dual-active front hydraulic exists at the front of the tractor, a hydraulic hose extension to the rear of the tractor is available.
The hydraulic steering can avoid driftage in on a slope. The hydraulic steering can still be retrofitted later.

Hydraulic Steering
A hydraulic steering, instead of the rigid version, is available for both types at a surcharge. The hydraulic steering should be ordered for the FRONT-STAR, if the machine is weighted with a dual-active front hydraulic. This steering isn’t coupled with the tractor steering, but it must be implemented with the control unit. If no dual-active front hydraulic exists at the front of the tractor, a hydraulic hose extension to the rear of the tractor is available.
The hydraulic steering can avoid driftage in on a slope. The hydraulic steering can still be retrofitted later.

Spring loaded tine-bar
The spring loaded tine-bar, which is height adjustable without tools, levels the plough clod and crushes the remaining clumps.

Spring loaded tine-bar
The spring loaded tine-bar, which is height adjustable without tools, levels the plough clod and crushes the remaining clumps.
Simple seeding of cover crops
With the P-BOX-MD or the P-BOX-STI it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. Depending on seeding rate and speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.
The seed is distributed pneumatically via hoses to the distribution plates which then spread out the seed exactly. Depending on the equipment the metering roller is powered by an electric motor or mechanically by a shaft with various ground drive variants.


Simple seeding of cover crops
With the P-BOX-MD or the P-BOX-STI it is possible to seed all standard seeds and their mixtures up to a size of 5 mm. Depending on seeding rate and speed it can be set to anywhere from 1 kg to 300 kg per hectare by a simple adjustment.
The seed is distributed pneumatically via hoses to the distribution plates which then spread out the seed exactly. Depending on the equipment the metering roller is powered by an electric motor or mechanically by a shaft with various ground drive variants.
spike disc arrangements 3 rows
The 3 rows – spike disc arrangement is for self-cleaning of the front roller.


spike disc arrangements 3 rows
The 3 rows – spike disc arrangement is for self-cleaning of the front roller.

Warning Signs and LED-lights
The warning signs with lights and indicator can be mounted in front as also in front and rear.

Warning Signs and LED-lights
The warning signs with lights and indicator can be mounted in front as also in front and rear.
Exact working with side plates
The side plates prevent soil from coming over the operating width.
Hydraulic Hose extension to the rear of the tractor


Exact working with side plates
The side plates prevent soil from coming over the operating width.
Hydraulic Hose extension to the rear of the tractor
Front roller FRONT-SPIKE
Front roller FRONT-SPIKE
Front roller
FRONT-SPIKE
- Front roller for seed bed preparation
- Little effort, big effect
- Works well also in humid conditions
- No deep tracks
- Better distribution of load
- Perfect cutting
FRONT-SPIKE
Through their perfect shape and the narrow-spaced 3-row adjustment, the special spike discs will mix finely granulated and rough soil ideal. As the discs overlap there is no danger that the roller will be clogged even in humid soil conditions. On ploughed, slightly sandy soil the FRONT-SPIKE is the perfect implement for levelling and recompacting the seedbed. The FRONT-SPIKE is also applicable for stony conditions without any problems.
The spring loaded tine-bar, which is height adjustable without tools, levels the plough clod and crushes the remaining clumps.