universal cultivator HURRICANE - for demanding areas of use

Optionsuniversal cultivatorHURRICANE

  • Universal sweep/double diamond share with wing share
  • Duckfoot sweep with guide plate
  • Narrow chisel
  • Spring loaded tine Goliath
  • Side plate
  • Serrated levelling discs
  • Rubber support wheels with holder and adjustment support
  • Following harrow 1-row instead of 2-row
  • Protective cover
  • Pneumatic seeder P-BOX-STI
  • Warning signs with holder and LED lighting

The correct tines and sweeps

Universal sweep/double diamond share with wing share
The universal sweep (diamond-shaped sweep) with a width of 13 cm is mounted as standard. Wing sweeps with a total width of 22.4 cm can be added quickly and easily to these sweeps. With the wing sweeps, it is possible to cut through the entire surface at a low working depth.

Universal sweep/double diamond share with wing share
The universal sweep (diamond-shaped sweep) with a width of 13 cm is mounted as standard. Wing sweeps with a total width of 22.4 cm can be added quickly and easily to these sweeps. With the wing sweeps, it is possible to cut through the entire surface at a low working depth.

Duckfoot sweep with guide plate
The duckfoot sweep with guide plate is recommended for shallow cultivation. The duckfoot sweep with a width of 250 mm guarantees in any case a full-surface cutting and is ideally suited for the first stubble cultivation. The volunteer grain and weed seeds are not buried, but emerge quickly and easy regulation is possible. The guide plate ensures optimum mixing of the organic matter with soil.

Duckfoot sweep with guide plate
The duckfoot sweep with guide plate is recommended for shallow cultivation. The duckfoot sweep with a width of 250 mm guarantees in any case a full-surface cutting and is ideally suited for the first stubble cultivation. The volunteer grain and weed seeds are not buried, but emerge quickly and easy regulation is possible. The guide plate ensures optimum mixing of the organic matter with soil.

Narrow chisel in addition to the diamond shaped sweep
The narrow chisel with a width of 5.5 cm is used for deep tillage, soil loosening and incorporation of straw. They can be used at a working depth between 12 and 25 cm.

Narrow chisel in addition to the diamond shaped sweep
The narrow chisel with a width of 5.5 cm is used for deep tillage, soil loosening and incorporation of straw. They can be used at a working depth between 12 and 25 cm.

GOLIATH leaf spring tines instead of rigid tines
For light, sandy and stony soil conditions, a leaf spring tine 150x14 mm can be selected. On these tines the inclination cannot be adjusted.

GOLIATH leaf spring tines instead of rigid tines
For light, sandy and stony soil conditions, a leaf spring tine 150x14 mm can be selected. On these tines the inclination cannot be adjusted.

1-row trailed weeder tines
Instead of the standard 2-row trailed weeder tines on the N, RP 58 and RP 47 rollers, a 1-row trailed weeder tine with 12 mm diameter tines can be fitted as an option.

1-row trailed weeder tines
Instead of the standard 2-row trailed weeder tines on the N, RP 58 and RP 47 rollers, a 1-row trailed weeder tine with 12 mm diameter tines can be fitted as an option.

Side plate to prevent ridges
The side plate, which has a special position for road transport, is recommended for an even surface after operation of the machine.

Side plate to prevent ridges
The side plate, which has a special position for road transport, is recommended for an even surface after operation of the machine.

Serrated levelling discs
Serrated levelling discs behind the last row of tines are available upon request. They level the soil in front of the rear roller, therefore they ensure uniform tillage. They are available with hydraulic folding as an option.

Serrated levelling discs
Serrated levelling discs behind the last row of tines are available upon request. They level the soil in front of the rear roller, therefore they ensure uniform tillage. They are available with hydraulic folding as an option.

Rubber support wheels
The rubber support wheels mounted on the first beam of the frame ensure precise maintenance of the working depth and smoother operation of the machine. These can be adjusted quickly and easily by means of a gearwheel adjustment.

Rubber support wheels
The rubber support wheels mounted on the first beam of the frame ensure precise maintenance of the working depth and smoother operation of the machine. These can be adjusted quickly and easily by means of a gearwheel adjustment.

Uncomplicated distribution of catch crops
With the pneumatic seeders (P-BOX-STI) all common seeds and their mixtures can be distributed very simply from approx. 1 kg / ha. The seeds are pneumatically transported via hoses to the distribution plates, which spread it precisely. The seeding box is adjusted via an operating terminal in the tractor - the metering roller is driven by an electric motor. Spreading is also possible with the mechanical seeders (DRILLBOX, MECHANICBOX) on rigid machines.

Uncomplicated distribution of catch crops
With the pneumatic seeders (P-BOX-STI) all common seeds and their mixtures can be distributed very simply from approx. 1 kg / ha. The seeds are pneumatically transported via hoses to the distribution plates, which spread it precisely. The seeding box is adjusted via an operating terminal in the tractor - the metering roller is driven by an electric motor. Spreading is also possible with the mechanical seeders (DRILLBOX, MECHANICBOX) on rigid machines.

Warning signs with LED lighting
Warning signs are available to the front as well as to the rear (symbol image).

Warning signs with LED lighting
Warning signs are available to the front as well as to the rear (symbol image).

Advantagesuniversal cultivatorHURRICANE

Technical datauniversal cultivatorHURRICANE

  • 1A quality tines
  • 4-row tine arrangement with 600 mm beam spacing
  • Lower links guided on both sides
  • Lower link and upper link equipped with hardened bushings
  • Hydr. working depth adjustment - 1 double-acting hydraulic valve required
  • Line spacing 200 mm
  • Tine with shear-bolt stone protection
  • Tine inclination adjustable (not with Goliath tine)
  • Universal sweep (double diamond share)
  • Rear rollers with ball bearings
  • Rear implement parallelogram guided
  • From 4.2 m working width hydraulically folding frame, lockable in working and transport position by means of safety hydraulic locking block (1 pc. additional double-acting hydraulic valve required)
  • Lower link width up to 3 m working width CAT II, from 4.2 m working width CAT III
  • Sturdy frame made of 100 mm tubes
  • Transport width 2.7 - 3 m

Perfection through 4-row design and high frame clearance
The 4-row tine arrangement of the universal cultivator guarantees good incorporation of straw and organic matter. Due to the spacious frame design risk of clogging is very limitedeven when working in fields with heavy, sticky soils and a high amount of organic matter. The clearance of up to. approx. 83 cm (depending on working depth) ensures sufficient space so the organic material can flow through (e.g. also in fields with a high amount of straw).

Perfection through 4-row design and high frame clearance
The 4-row tine arrangement of the universal cultivator guarantees good incorporation of straw and organic matter. Due to the spacious frame design risk of clogging is very limitedeven when working in fields with heavy, sticky soils and a high amount of organic matter. The clearance of up to. approx. 83 cm (depending on working depth) ensures sufficient space so the organic material can flow through (e.g. also in fields with a high amount of straw).

Type/Working width cm

Tine rows

Tines

from hp/kW

Weight approx. kg

HURRICANE 260 ON

4

13

100/74

950

HURRICANE 260 F

4

13

100/74

1 110

HURRICANE 260 R

4

13

100/74

1 135

HURRICANE 260 RF

4

13

100/74

1 300

HURRICANE 260 RP47

4

13

100/74

1 380

HURRICANE 260 R5

4

13

100/74

1 190

HURRICANE 260 N

4

13

100/74

1 515

HURRICANE 260 RP58

4

13

100/74

1 515

 

 

 

 

 

HURRICANE 300 ON

4

15

120/88

1 010

HURRICANE 300 F

4

15

120/88

1 210

HURRICANE 300 R

4

15

120/88

1 210

HURRICANE 300 RF

4

15

120/88

1 380

HURRICANE 300 RP47

4

15

120/88

1 460

HURRICANE 300 R5

4

15

120/88

1 250

HURRICANE 300 N

4

15

120/88

1 595

HURRICANE 300 RP58

4

15

120/88

1 595

 

 

 

 

 

HURRICANE 420 ON

4

21

150/110

1 840

HURRICANE 420 F

4

21

150/110

2 170

HURRICANE 420 R

4

21

150/110

2 190

HURRICANE 420 RF

4

21

150/110

2 370

HURRICANE 420 RP47

4

21

150/110

2 390

HURRICANE 420 R5

4

21

150/110

2 150

HURRICANE 420 N

4

21

150/110

2 700

HURRICANE 420 RP58

4

21

150/110

2 700

 

 

 

 

 

HURRICANE 460 ON

4

23

180/132

1 950

HURRICANE 460 RF

4

23

180/132

2 570

HURRICANE 460 RP47

4

23

180/132

2 590

HURRICANE 460 R5

4

23

180/132

2 370

HURRICANE 460 N

4

23

180/132

2 890

HURRICANE 460 RP58

4

23

180/132

2 890

 

 

 

 

additional weight star disc with side disc

for HURRICANE 260

200 kg

for HURRICANE 300

210 kg

for HURRICANE 420

310 kg

for HURRICANE 460

330 kg

 

 Rear Roller
ONWithout rear roller
FPlain crumbler ø 400 mm
RRound rod crumbler ø 400 mm
RFFront round rod crumbler ø 400 mm – rear plain crumbler ø 400mm
RP 47Ring packer roller ø 470 mm with spring stripper between the rings and trailed weeder tines, 2-rows, ø 10 mm
R5Round rod crumbler ø 500 mm
RP58Ring packer roller ø 575 mm with spring stripper between the rings and trailed weeder tines, 2-rows, ø 10 mm
NNova roller ø 575 with stripper and trailed weeder tines, 2-rows, ø 10 mm

           

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types.

Hydraulic adjustment of working depth via the rear rollers
Hydraulic adjustment of the working depth is included in the standard specification. A scale on the hydr. cylinder shows the working depth. This ensures convenient adjustment and perfect setting of the desired working depth.

Hydraulic adjustment of working depth via the rear rollers
Hydraulic adjustment of the working depth is included in the standard specification. A scale on the hydr. cylinder shows the working depth. This ensures convenient adjustment and perfect setting of the desired working depth.

The right roller

Wide choice of sweeps ensures the availability of the correct tool for changing conditions
The universal cultivator comes with 130 mm double diamond shares as standard. Optional wing shares (224 mm) can be mounted in combination with them. For more shallow operation or to ensure an even greater overlap, 250 mm wide duckfoot sweeps incl. guide plates can be mounted. For deeper tillage, narrow chisels (55 mm) are availabe.

Wide choice of sweeps ensures the availability of the correct tool for changing conditions
The universal cultivator comes with 130 mm double diamond shares as standard. Optional wing shares (224 mm) can be mounted in combination with them. For more shallow operation or to ensure an even greater overlap, 250 mm wide duckfoot sweeps incl. guide plates can be mounted. For deeper tillage, narrow chisels (55 mm) are availabe.

F: Flat rod crumbler Ø 400 mm
Perfect crumbling for medium-heavy soil.

F: Flat rod crumbler Ø 400 mm
Perfect crumbling for medium-heavy soil.

Rear implements for various different conditions
In order to achieve an ideal work result, various different rear implements are required. With a total of 8 different rollers the ideal cultivator for various different conditions can be specified.

Rear implements for various different conditions
In order to achieve an ideal work result, various different rear implements are required. With a total of 8 different rollers the ideal cultivator for various different conditions can be specified.

R: Round rod crumbler Ø 400 mm
Optimal crumbling on medium-heavy soil and good load-capacity on light soil.

R: Round rod crumbler Ø 400 mm
Optimal crumbling on medium-heavy soil and good load-capacity on light soil.

Overlapping of duckfoot sweeps = operation over the full surface
Overlaping duckfoot sweeps are needed to cut the full surface of the field. 250 mm wide sweeps are available as an option. On 20 cm line spacing an overlap of 50 mm (25%) is guaranteed with these sweeps (see graphic). This generous overlap ensures that the entire surface of the field is cultivated, even when the cultivator is set to a shallow working depth.This secures emerged weeds are controlled mechanically.

Overlapping of duckfoot sweeps = operation over the full surface
Overlaping duckfoot sweeps are needed to cut the full surface of the field. 250 mm wide sweeps are available as an option. On 20 cm line spacing an overlap of 50 mm (25%) is guaranteed with these sweeps (see graphic). This generous overlap ensures that the entire surface of the field is cultivated, even when the cultivator is set to a shallow working depth.This secures emerged weeds are controlled mechanically.

RF: Round rod/flat rod crumbler ø 400 mm
Good crumbling, good leveling and reconsolidation as well as exact depth control. For medium-heavy soil, universally applicable.

RF: Round rod/flat rod crumbler ø 400 mm
Good crumbling, good leveling and reconsolidation as well as exact depth control. For medium-heavy soil, universally applicable.

Assembly of seeding box
A seeding box (P-BOX-STI) can be mounted on the cultivator in all different  working widths so catch crops can be sown quickly and easily during/after stubble cultivation. The even distribution and positioning of the deflector plates ensures a safe emergence of the green cover or catch crop.

Assembly of seeding box
A seeding box (P-BOX-STI) can be mounted on the cultivator in all different  working widths so catch crops can be sown quickly and easily during/after stubble cultivation. The even distribution and positioning of the deflector plates ensures a safe emergence of the green cover or catch crop.

R5: Round rod crumbler ø 500 mm
High load capacity, good reconsolidation and best suited for very light soil. Optimal for seedbed preparation in sandy soil.

R5: Round rod crumbler ø 500 mm
High load capacity, good reconsolidation and best suited for very light soil. Optimal for seedbed preparation in sandy soil.

No re-adjustment of the leveling discs necessary
The star discs are mounted on the parallelogram which carries the rear roller. If the working depth is changed, they do not have to be readjusted. To enable fine adjustment nevertheless, adjustment spindles are fitted to the leveling discs.

No re-adjustment of the leveling discs necessary
The star discs are mounted on the parallelogram which carries the rear roller. If the working depth is changed, they do not have to be readjusted. To enable fine adjustment nevertheless, adjustment spindles are fitted to the leveling discs.

RP: Ringpacker roller with cleaner, ø 575 mm
On the ringpacker roller the distance between the rings is 12,5 cm, therefore it achieves reconsolidation in strips of 12.5 cm. Due to the wedge-shaped reconsolidation, the soil is compressed in the lower area and all cavities are closed, while the upper soil layer remains loose as well as a fine structure is maintained. Due to its high load-capacity, it is ideally suited for all soil types. Spring strippers between the rings prevent the roller from clogging.

RP: Ringpacker roller with cleaner, ø 575 mm
On the ringpacker roller the distance between the rings is 12,5 cm, therefore it achieves reconsolidation in strips of 12.5 cm. Due to the wedge-shaped reconsolidation, the soil is compressed in the lower area and all cavities are closed, while the upper soil layer remains loose as well as a fine structure is maintained. Due to its high load-capacity, it is ideally suited for all soil types. Spring strippers between the rings prevent the roller from clogging.

Many well-concieved options and solutions
To make a cultivator a professional and user-friendly tool, the HURRICANE has been designed with  lot of well thought-out and practical detail solutions. The frame construction (tube in tube) and the combination of the different working tools make the universal cultivator a highly efficient tool for modern agriculture.

Many well-concieved options and solutions
To make a cultivator a professional and user-friendly tool, the HURRICANE has been designed with  lot of well thought-out and practical detail solutions. The frame construction (tube in tube) and the combination of the different working tools make the universal cultivator a highly efficient tool for modern agriculture.

RP 47: Ringpacker roller with cleaner, Ø 470 mm
Same as RP roller, but with ø 470 mm and lower weight.

RP 47: Ringpacker roller with cleaner, Ø 470 mm
Same as RP roller, but with ø 470 mm and lower weight.

N: Nova roller with cleaner ø 575 mm
The nova roller achieves reconsolidation in strips with a distance of 17 cm. Through the U-profile rings, which deliberately fill with soil, soil rolls on soil. This very soil-friendly reconsolidation ensures a rough surface structure. Its high load-capacity makes it ideally suited for all soil types. Scrapers between the rings level the soil and prevent the roller from clogging.

N: Nova roller with cleaner ø 575 mm
The nova roller achieves reconsolidation in strips with a distance of 17 cm. Through the U-profile rings, which deliberately fill with soil, soil rolls on soil. This very soil-friendly reconsolidation ensures a rough surface structure. Its high load-capacity makes it ideally suited for all soil types. Scrapers between the rings level the soil and prevent the roller from clogging.

Durable frame construction
The modern and stable frame construction ensures an extremely robust machine. Thus, the universal cultivator is designed to be extremely durable and always produces excellent work results even after many seasons of use.

Durable frame construction
The modern and stable frame construction ensures an extremely robust machine. Thus, the universal cultivator is designed to be extremely durable and always produces excellent work results even after many seasons of use.

Standard tine with diamond shaped sweep 130 mm wide
The special shape of the tine breaks up the soil, preventing smearing of the soil pores (other share types and widths available).

Standard tine with diamond shaped sweep 130 mm wide
The special shape of the tine breaks up the soil, preventing smearing of the soil pores (other share types and widths available).

Hydraulic folding from 4.2 m
The universal cultivator is folded by means of two separate side wings (from a working width of 4.2 m). This makes it easy to park the machine in a space-saving manner. By means of a hydraulic safety locking block, the HURRICANE locks automatically in working and transport position.

Hydraulic folding from 4.2 m
The universal cultivator is folded by means of two separate side wings (from a working width of 4.2 m). This makes it easy to park the machine in a space-saving manner. By means of a hydraulic safety locking block, the HURRICANE locks automatically in working and transport position.

Lower links with a choice of two mounting heights
To meet different tractor sizes the HURRICANE is equipped with two mounting positions with bushings and anti-rotation pins on the lower links. Mounting category: CAT II up to 3 m, from 4,2 m working width CAT III.

Lower links with a choice of two mounting heights
To meet different tractor sizes the HURRICANE is equipped with two mounting positions with bushings and anti-rotation pins on the lower links. Mounting category: CAT II up to 3 m, from 4,2 m working width CAT III.

Deflector plates
Deflector plates for interrupting the earth flow in the first row of tines directly behind the tractor wheels, this prevents the tractor from serious soiling.

Deflector plates
Deflector plates for interrupting the earth flow in the first row of tines directly behind the tractor wheels, this prevents the tractor from serious soiling.

Indicator for the position of the hydraulic working depth setting
A clear indicator is mounted so that the position of hydraulic working depth adjustment can be conveniently seen from the tractor.

Indicator for the position of the hydraulic working depth setting
A clear indicator is mounted so that the position of hydraulic working depth adjustment can be conveniently seen from the tractor.

Adjustment of the tine inclination
In heavy soil conditions adjusting the tine angle can support easy entering of the tines into the soil. The adjustment screw is at the same time the shear-off overload protection. The holder of the sweep (60x25 mm) meets all requirements. (Adjustment not possible with leaf spring tine).

Adjustment of the tine inclination
In heavy soil conditions adjusting the tine angle can support easy entering of the tines into the soil. The adjustment screw is at the same time the shear-off overload protection. The holder of the sweep (60x25 mm) meets all requirements. (Adjustment not possible with leaf spring tine).

Videos universal cultivator HURRICANE

Videos
universal cultivator
HURRICANE

Photos universal cultivator HURRICANE

Photos
universal cultivator
HURRICANE

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

Universal cultivator HURRICANE

  • Stubble turning over the full surface or incorporation of cover crops
  • Perfect mixing without clogging
  • Convenient and uncomplicated adjustment
  • Versatile use due to 4-row frame construction
  • Wide range of different working tools
  • Perfect distribution of straw horizontally & vertically

Universal cultivator HURRICANE

Universal cultivator
HURRICANE

  • Stubble turning over the full surface or incorporation of cover crops
  • Perfect mixing without clogging
  • Convenient and uncomplicated adjustment
  • Versatile use due to 4-row frame construction
  • Wide range of different working tools
  • Perfect distribution of straw horizontally & vertically

Conceptuniversal cultivatorHURRICANE

  1. 4-beam arrangement with a line spacing of 20 cm
  2. The right rear roller for every application and soil type
  3. Simple working depth adjustment with hydraulically adjustable parallelogram-guided rear rollers
  4. The star- or full discs are mounted on the parallelogram of the rear roller. When changing the working depth you do not have to re-adjust these levelling elements

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

  1. 4-beam arrangement with a line spacing of 20 cm
  2. The right rear roller for every application and soil type
  3. Simple working depth adjustment with hydraulically adjustable parallelogram-guided rear rollers
  4. The star- or full discs are mounted on the parallelogram of the rear roller. When changing the working depth you do not have to re-adjust these levelling elements

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

The extremely user-friendly HURRICANE universal cultivator combines three types of machines in one. The HURRICANE is the ideal implement for stubble cultivation or for incorporation of cover crops. The implement promotes soil life, reduces erosion and ensures an extremely good soil structure. It also shows its strengths when breaking up compactions in deeper layers of the soil. The cultivator can also be used for intensive seedbed preparation. The possible working depth can be adjusted between 4 and 25 cm with a tine adjustment in 4 rows and a line spacing of 20 cm (depending on the kind of shares, following tools and soil conditions). Operation over the full surface can be achieved by chosing the correct shares. After tillage, the soil surface is levelled and reconsolidated. The machine is an extremely compact and manoeuvrable implement that can be used effectively on small and large areas. A seeder for sowing catch crops can be easily mounted and adjusted.

 

To the seedbed combination EXTREM, to the fine cultivator VIBROSTAR or to the light cultivator TAIFUN!

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP