seedbed cultivator VIBROSTAR - the perfect cultivator

Seedbed cultivator VIBROSTAR

  • Handles a lot of trash
  • Intense mixing of the soil
  • High working speed
  • Perfect crumbling seedbed
  • 4-row or a 5-row version
  • Big choice of divers crumblers

Seedbed cultivator VIBROSTAR

Seedbed cultivator
VIBROSTAR

  • Handles a lot of trash
  • Intense mixing of the soil
  • High working speed
  • Perfect crumbling seedbed
  • 4-row or a 5-row version
  • Big choice of divers crumblers

Concept seedbed cultivator VIBROSTAR

Brochures seedbed cultivator VIBROSTAR
Brochures seedbed cultivator VIBROSTAR
Brochures seedbed cultivator VIBROSTAR
Downloads Downloads

Advantages seedbed cultivatorVIBROSTAR

Technical data seedbed cultivatorVIBROSTAR

  • On Vibrostar 4-… + Vibrostar F-4… = tine arrangement 4-row
  • On Vibrostar 5-… = tine arrangement 5-row
  • Standard S-tine for long life
  • Line spacing 10 cm
  • Lower links guided on both sides
  • Lower and top links are equipped with hardened bushings
  • Screwed crumbler axles
  • Rear rollers ball bearing mounted
  • Position of second crumbler separately adjustable
  • Holder for levelling plate
  • Parking support (on the hydraulically foldable version)
  • VIBROSTAR 4-... Mounting category CAT II or III (depends on working width)
  • VIBROSTAR 5-... Mounting category CAT II + III
  • VIBROSTAR 4-1210 with bolted chassis

Transport width:

  • for rigid machines = working width + 20 cm
  • for hydraulically folding machines up to a working width of 6.10 m = 2.6 m
  • for hydraulically folding machines on from a working width of 8.10 m = 3.0 m
  • Parking support for Vibrostar 4-… hydraulically foldable (not necessary on other frame versions)

 

Deviation in serial equipment on the VIBROSTAR F-4-…

  • Heavy-duty long-lasting S-quality tine
  • Lower link width Vibrostar F 450 – 490 CAT II; Vibrostar F 550 – 610 CAT III
  • Front crumbler – flat rod ø 380 mm or round rod crumbler ø 380 mm
  • Levelling plate

 

 

Options seedbed cultivator VIBROSTAR

working depth adjustment via bolts on a breadboard

The working depth is adjusted parallel via bolts on a breadboard. The spindle is used to set the distribution of weight between the 2 crumblers. This controls the crushing effect of the 2nd crumbler, to ensure a reconsolidated seedbed with ideal soil structure.

The Vibrostar enters the soil easily also in heavy soil conditions and keeps the working depth constantly. The vibrating spring tines mix and aerate the soil up to the working depth determined by you. Not only do they vibrate in the driving direction they also do so laterally while barely moving up or down. This way the working depth remains at the chosen setting.

working depth adjustment via bolts on a breadboard

The working depth is adjusted parallel via bolts on a breadboard. The spindle is used to set the distribution of weight between the 2 crumblers. This controls the crushing effect of the 2nd crumbler, to ensure a reconsolidated seedbed with ideal soil structure.

The Vibrostar enters the soil easily also in heavy soil conditions and keeps the working depth constantly. The vibrating spring tines mix and aerate the soil up to the working depth determined by you. Not only do they vibrate in the driving direction they also do so laterally while barely moving up or down. This way the working depth remains at the chosen setting.

Type

Working width cm /
No. of tines

from
HP/kW

Weight kg approx.

VIBROSTAR 4-390

390/39

85/62

1290

VIBROSTAR 4-450

450/45

90/66

1370

VIBROSTAR 4-490

490/49

100/74

1430

VIBROSTAR 4-550

550/55

120/88

1650

VIBROSTAR 4-610

610/61

140/103

1780

VIBROSTAR 4-810 1

810/81180/132

3440

VIBROSTAR 4-1210 2

1210/121240/1767500

 

 

 

 

VIBROSTAR 5-400

400/40

90/66

1470

VIBROSTAR 5-500

500/50

120/88

1930

VIBROSTAR 5-600

600/60

150/110

2340

 

 

 

 

VIBROSTAR F-4-450

450/45

110/81

2250

VIBROSTAR F-4-490

190/49120/88

2360

VIBROSTAR F-4-550

550/55140/103

2680

VIBROSTAR F-4-610

610/61160/118

2840

 

   with 2 support wheels on the side-wing
2    double folding frame, standard trailed with bolted chassis, with 4 support wheels mounted on the side and external wing

 

Technical data and specifications are approximate and without obligation. Construction and design are subject to change.

 

  • Track loosener
  • VIBRO-BOARD
  • Trailed weeder tines 1-row or 2-row
  • Levelling plate (standard equipment on the F-4 series)
  • Stone protection for central bearings
  • Support wheels
  • Warning signs with holder and LED-lights
  • Front crumbler on VIBROSTAR F-4… round steel crumbler instead of flat steel crumbler
  • Pneumatic seeders P-BOX
  • For VIBROSTAR 5-... site-plates on both sides
  • For VIBROSTAR 5-... double drag tine

Videos seedbed cultivator VIBROSTAR

Videos
seedbed cultivator
VIBROSTAR

VIBROSTAR with front crumbler

In some working widths (see table „Technical data“) the VIBROSTAR is also available with a front crumbler, well-suited for very shallow seedbed preparation (beet crops). In combination with the front crumbler the levelling plate is part of the standard equipment. The depth adjustment of the front crumbler is easy and exact, simply adjust it parallel via bolts on the breadboard.

VIBROSTAR with front crumbler

In some working widths (see table „Technical data“) the VIBROSTAR is also available with a front crumbler, well-suited for very shallow seedbed preparation (beet crops). In combination with the front crumbler the levelling plate is part of the standard equipment. The depth adjustment of the front crumbler is easy and exact, simply adjust it parallel via bolts on the breadboard.

rubber support wheels for a precise working depth.

Depending on the model, rubber support wheels for the side wings can be mounted (standard on VIBROSTAR 1210).

 

 

 

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Photos seedbed cultivator VIBROSTAR

Photos
seedbed cultivator
VIBROSTAR

Intercrop seeding

Especially for intercrop seeding we offer pneumatic seeders with complete assembly sets, which can be easily retro-fitted.

 

Intercrop seeding

Especially for intercrop seeding we offer pneumatic seeders with complete assembly sets, which can be easily retro-fitted.

 

Warning signs

Warning signs and lights are available, they can pivot depending on the folding mechanism of the frame.

Warning signs

Warning signs and lights are available, they can pivot depending on the folding mechanism of the frame.

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

 

Three-point linkage

The three-point mounting of the hydraulically folding machines is equipped with hardened bushings.

Three-point linkage

The three-point mounting of the hydraulically folding machines is equipped with hardened bushings.

VIBRO-BOARD

For the VIBROSTAR with 5 rows of tines there is a VIBRO-BOARD available as option. Because of the hydraulic adjustment it’s easy to operate. It can be adjusted via the hydr. valve of the tractor.

VIBRO-BOARD

For the VIBROSTAR with 5 rows of tines there is a VIBRO-BOARD available as option. Because of the hydraulic adjustment it’s easy to operate. It can be adjusted via the hydr. valve of the tractor.

Levelling plate for perfect surface

The levelling plate is height adjustable by a bolt. The possibility to adjust the position („drag“ or „push“) squashes the clods, levels the surface and evens out the tractor tracks. These tools run very smoothly and the working depth remains constant. The levelling plate is a useful tool especially for springtime seedbed preparation. A shearbolt protects it from overload.

Levelling plate for perfect surface

The levelling plate is height adjustable by a bolt. The possibility to adjust the position („drag“ or „push“) squashes the clods, levels the surface and evens out the tractor tracks. These tools run very smoothly and the working depth remains constant. The levelling plate is a useful tool especially for springtime seedbed preparation. A shearbolt protects it from overload.

 

Transport position

All models from 3.3 m working width are hydraulically folded to a transport width of less than 3 m. transport position

 

 

The correct tine

 

Standard S-tine

dimension 32 x 10

for medium to light soil conditions – up to a working depth of 15 cm after ploughing standard tine on the VIBROSTAR 4-… and VIBROSTAR 5-…

 

Standard S-tine with reinforced spring

dimension 32 x 10 + 32 x 8

for medium to heavy, rocky soil conditions – up to a working depth of 15 cm after ploughing

 

Heavy S-tine

dimension 45 x 12

for all soil conditions, up to a working depth of 15 cm after ploughing (for springtime use, for wintergreen areas, etc.) standard tine on the VIBROSTAR F-4-…

 

Special tine straight

dimension 45 x 12

for medium to light soil conditions – up to a working depth of 8 cm (maize and beet crops)

 

Track loosener height adjustable

with duckfoot sweep 105 mm

dimension 32 x 10 + 32 x 10

 

Duckfoot sweep 70 mm (only for heavy S-Tine)

Duckfoot sweep 105 mm (only for heavy S-Tine)

 

Choice of crumblers

 

ON - WITHOUT TRAILING CRUMBLER

For very wet or sandy soil conditions

 

1 ZW -ONE-ROW SERRATED CRUMBLER Ø 320 MM

For medium to light soil conditions

 

2 ZW -2-ROW SERRATED CRUMBLER Ø 320 MM/Ø 280 MM

For medium to heavy soil conditions

 

1 F -1-ROW FLAT ROD CRUMBLER Ø 380 MM

For medium soil conditions, for heavy machines (bigger working widths)

 

1 R -1-ROW ROUND ROD CRUMBLER Ø 380 MM

For medium to light soil conditions, wet conditions, rocks; for heavy machines (bigger working widths)

 

2 F -2-ROW FLAT ROD CRUMBLER Ø 380 MM/Ø 380 MM

For medium to heavy soil conditions; for heavy machines (bigger working widths)

 

2 R -2-ROW ROUND ROD CRUMBLER Ø 380 MM/Ø 380 MM

For medium to light soil conditions, on sand and rocks, wet conditions; for heavy machines (bigger working widths)

 

2 FZ -2-ROW CRUMBLER, 1st ROW FLAT RODS Ø 380 MM, 2nd ROW SERRATED CRUMBLER Ø 320 MM

For medium soil conditions; for heavy machines (bigger working widths)

 

2 RZ -2-ROW CRUMBLER, 1st ROW ROUND RODS Ø 380 MM, 2nd ROW SERRATED CRUMBLER Ø 320 MM

For medium to light soil conditions, on sand, wet conditions; for heavy machines (bigger working widths)

 

2 RF -2-ROW CRUMBLER, 1st ROW ROUND RODS Ø 380 MM, 2nd ROW FLAT RODS Ø 380 MM

For medium to light soil conditions, on sand; for heavy machines (bigger working widths)

 

2 ST -2-ROW TRAILING WEEDER TINES Ø 10 MM INSTEAD OF CRUMBLER

For very wet, sandy or stony soil conditions

 

RP47 -RING PACKER ROLLER Ø 470 mm WITH SPRING STRIPPER BETWEEN THE RINGS

reconsolidation roller compacts for every soil and finely it’s crumbled

for all different types of soil – reconsolidates the soil and gives a crumbled soil structure

 

 

ON

1 ZW

2 ZW

1 F

1 R

2 F

2 R

2 FZ

2 RZ

2 RF

2 ST

RP 47

VIBROSTAR 4-190 – 4-230

 

 

 

 

 

 

 

VIBROSTAR 4-250 – 4-330

 

 

 

 

 

 

 

VIBROSTAR 4-350 – 4-610

 

 

 

 

 

VIBROSTAR 4-810 – 4-1200

 

 

 

 

 

 

 

VIBROSTAR 5-400 – 5-600

 

 

 

VIBROSTAR F-4-450 – F-4-610

 

 

 

 

 

 

 

The spring tine combination VIBROSTAR is predominantly used on light, medium heavy and stony soil. Thanks to the specially designed frame with top-quality spring tines, it can handle a high amount of organic matter in the field and ensures an intense mixing of the soil. The VIBROSTAR is the ideal machine for seedbed preparation, also for areas with wintergreen and for secondary stubble cultivation. Depending on its tine arrangement the VIBROSTAR is also well-suited for incorporating liquid and solid manure as well as for fighting couch-grass (agropyrum repens).

Depending on its use the appliance is available in a 4-row or a 5-row version with varying tine shapes and tine lengths. The 4-row version is available with a front crumbler.

 

To the cultivator TAIFUN or universal cultivator HURRICANE!

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP