Special row-crop cultivator CHOPSTAR-VERSO

The VERSO advantages at a glance

• Hoeing in mulch, no-till or strip-till
• Very high working speed – with the cutting discs, hoeing is possible even at a very early stage of growth
• Very narrow “hoeing belt” – perfectly prepared for finger weeders or rotative weeders
• Great flexibility as well as adaptation to crop size
• Low wear and fuel consumption thanks to the cutting discs
• High retraction force – CHOPSTAR TWIN concept (cutting discs + angle knives)

In order to enable the cutting discs and angle knives of the “TWIN” hoeing section to be adapted to different crops quickly, they come as a standard feature with the SMART-GRIP quick adjustment system. This saves time by quickly adapting the row-crop cultivator to a wide range of conditions while maintaining the best possible grip – thanks to a special quadruple clamping. The angle knives can be rigid or spring mounted.

With the tine hoeing elements (e.g. beet, soybeans, field bean, corn, etc.) from 30 cm / 11.80″ row spacing, the hoeing element is placed “under” the elongated parallelogram. It´s advantage is that the hoeing elements and tines are pulled in better even in soils with heavy crusts and hard soils. Due to the long parallelogram, less pressure is needed to push in the tines as if the hoeing elements would be placed “behind” the parallelogram. In addition, an adjustable retraction spring guarantees that the hoeing element gets pushed into the soil and maintains the set working depth.

In order to be able to cultivate at a later hoeing pass, the VERSO hoeing element can be fast rebuilt. The pairs of cutting discs are dismounted and the angle knives are exchanged for standard vibro-tines. On these heaping shares could also be mounted. This fast and uncomplicated rebuilding makes it possible to use the row-crop cultivator as an all-purpose machine in the early stage of the culture as well as in the late stages to the best possible results. (Attention only possible with options and not in the standard-version)

The cutting discs in front of the angle knives allow to operate the machine in mulch or no-till, but also stip-till crops. The organic matter is cut close to the plant row what brings precise and quick hoeing without clogging.

The VERSO-hoe element is ideally suitable for hoeing in mulch crops as well as a lot of organic matter. Depsite the smallest hoeing belt a very high working speed can be achieved because of the “clearing” cutting discs, which in turn increases the economic efficiency and profitability of the machine enormously. The hoe element can be individually adjusted to the crop size and similar to the TWIN concept an extreme immersing power. Wear and tear as well as the needed fuel requirement can also reduced by the rolling as well as cutting work tools.

• Sideshift frame and row-crop cultivator are mounted very closely together
• One sideshift frame can be used for several row-crop cultivators
• Latest version of hard- and software
• Precise row recognition in different row-crops
• Best visibility – even in fields with heavy weed infestation and/or small crops
• Proven a thousand times

Many sophisticated additional options such as following working tools, SECTION-CONTROL element lifting, camera steering, etc. make every Einböck row-crop cultivator an individually adaptable machine. So every cultivator is designed to perfectly meet current conditions, crops or types of soil.

To camera steering ROW-GUARD
To hydraulic lifting SECTION-CONTROL
To finger weeders

Depending on the configuration, different tines and sweeps can be mounted:

• Einböck special vibro-tines
• Standard vibro-tines
• Einböck-special-ultraflat
• S-tines
• Carbide metal sweeps
• Heaping sweeps & angle knives

The stable machine frame, to which the hoeing parallelograms are attached, is available in a rigid version or with a hydraulically foldable design up to a width of 19 m / 62 ft. The special Einböck profiled tube allows for quick and easy mounting of the hoeing elements. The special frame shape and design ensures maximum durability and an exact fit. In addition, different row distances can be quickly and infinitely adjusted. The ROW-GUARD camera steering system can be mounted on all frames as well.

1. Rear frame for rigid machines with upper link steering
2. Frame folded hydraulically (rear with upper link steering)
3. Rear double folding frame up to 12 m / 40 ft
4. Rear double folding frame and wide middle frame up to 19 m / 62 ft
5. Special frame

The working depth of the hoeing section is continuously variable adjustable with a spindle on the depth control wheel. So the working depth of the hoeing tool can be adjusted to the millimetre and it is perfectly maintained during operation. A scale shows the actual adjustment. Each parallelogram should be adjusted individually, because e.g. the tracks behind the tractor wheels should be hoed deeper in order to break them up.

The wide parallelograms are equipped with retraction support and durable Farmflex feeler wheels. Furthermore they can be adjusted in the joints, this guarantees a high (side)stability and accuracy after many years of use. The long parallelograms provide enough space to compensate unevenness of the fields on each element, on hills or pans.

All Einböck row-crop cultivator parallelograms are fitted with three-step adjustable retraction spring as standard. These ensure that the hoeing tools penetrate better, even in heavily crusted soils, and enable higher working speeds without the elements vibrating or jumping.

Rear-mounted row-crop cultivators come standard with an automatic upper link steering system. This ensures exact hoeing, also on hills and bends. The row-crop cultivator is guided exactly behind the tractor, even if there are a lot of bends. The cultivator is steered via the upper link of the 3-point hitch by metal gauge-wheels, therefore the machine is used with position control on the 3-point linkage.

The gauge wheels ensure perfect guidance of the hoe and stability at hilly conditions. The tractor’s front wheels are not relieved of load, as the weight of the machine is carried by the gauge wheels. Especially on hilly conditions, the gauge wheels help prevent the implement from drifting. Scrapers ensure that the gauge wheels do not become clogged.

A frame clearance up to 70 cm / 28″ makes working in bigger crops like corn, sunflowers, etc. possible. So efficient and careful hoeing / ridging up in late growth stage does not cause any problem.

The section has a lifting height of up to 35 cm / 14″ (depending on the machine configuration and soil conditions) and can automatically be controlled by GPS via SECTION-CONTROL, or manually by switches. Lifting the sections ensures no crop is damaged at the headlands when the fields are not square. This option is especially recommended for contractors or farms with a lot of misshaped fields.

The finger weeders (also called finger hoes) or the rotative weeder elements pull out or spill weeds between the plants. In this way, the unworked hoeing area is worked and thus the crop is additionally “cleaned”.

A ROW-GUARD camera-guided sideshift frame can be mounted to each row-crop cultivator, also retro-fitted.

Adjustable weeder tines can be mounted for pulling weeds to the surface and ensure they dry out. They clean the roots of the weeds from soil and at the same time they slightly level the cultivated areas. The outer tines on the element can be exchanged to direct the earth flow either to or away from the crop row (principle of torsion weeder). This also enables a slight hilling effect.

For some crops precise and effective hilling is necessary. This is possible with these hilling discs or elements which can be very precisely adjusted (e.g. for corn, soybean, sunflower).

The pneumatic seeding box P-BOX or the front tank JUMBO-SEED can be optionally combined with the row-crop cultivator. These can be used to apply under-seeds or fertilizers during hoeing.

For professional and precise work of the jockey wheel even on light soils, pneumatic wheels (instead of the standard Farmflex jockey wheels) are available as an option. These ensure that the desired working depth is maintained in very light or sandy soils thanks to a wider tread.

The JUMBO-STREAM front tank for liquids offers efficient solutions for combined weed control. In combination with the proven CHOPSTAR-PRIME row-crop cultivator, the front tank enables effective mechanical weed control that includes hoeing and simultaneous band spraying or fertilizing.

In order to increase the precision of a row-crop cultivator without camera steering or to reduce the width of the hoeing belt, a manual hydraulic steering is optionally available. This accessory allows a person to steer the row-crop cultivator independently from the tractor. The seat is positioned so that the best view on the crop row is guaranteed. The steering is hydraulically operated, so that even longer hoeing operations can be done.

Our hoeing technology offers numerous additional options and special equipment. In addition, there are many other individual solutions that we have successfully implemented following customer requests over the last 45 years. To optimally adapt your row-crop cultivator to your requirements, we need as much detailed information as possible. Our CHECKLIST is a helpful tool for this purpose. Let us know your requirements – we will be happy to check on the feasibility!