Seedbed cultivator
VIBROSTAR

The large number of different levelling tools in combination with various tines, sweeps and trailed weeder tines make the VIBROSTAR to a fine cultivator that can be individually adapted to the respective conditions and purposes. In this way, the best specification to achieve the desired result can be found.

Even seedbed preparation and levelling on ploughed or mulch-till fields with organic matter. Ideal for seedbed preparation even on compacted soil, as clods are placed on the surface and fine soil is placed in the seed layer. The different rollers for precise depth control ensure excellent mixing as well as crumbling.

Up to 52 cm / 20.50″ of clearance (depending on working depth and choice of tines) ensure operation without blocking.

In order to cut through the entire surface, when equipped with heavy S-tines, 105 mm / 4.13″ wide duckfoot sweeps can be fitted. These provide sufficient overlap at 100 mm / 3.94″ line spacing to ensure working over the full surface.

A hydraulically adjustable VIBRO-BOARD ensures initial levelling in front of the tines as well as breaking up and crushing of the clods. This way, the foundation for excellent working quality of the seedbed cultivator is already ensured by the first working tool.
Available for VIBROSTAR XXL and VIBROSTAR 5-…

In some working widths (see table: Technical data), the VIBROSTAR seedbed cultivator is also available as an implement with front roller. This makes the machine ideal for very shallow seedbed preparation (e.g. for sugar beets). For improved depth control, the height of the front roller can be adjusted precisely and easily by means of bolts in a breadboard.

The levelling plate, adjustable in height and angle, levels the surface. The cultivator’s working tools are guided smoothly during operation. By adjusting it on “dragging” or “on grip” position, it crushes the clods and levels it out. The levelling plate is recommended especially for seedbed preparation on ploughed fields in spring. In combination with the front roller, this plate is standard.

The working depth is adjusted by means of bolts in a breadboard. With the spindle, the downforce on the rollers can be adjusted to the specific conditions. The result is a reconsolidated seedbed with an optimally crumbly structure.
Even in heavy soil conditions, the cultivator with S-tines guarantees optimum penetration and an exact constant working depth. The vibrating spring tines cultivate and aerate the soil at any desired working depth. They vibrate as well in the direction of operation as laterally, thus ensures that the desired working depth is maintained at all times.

1ZW: Serrated crumbler ø 320 mm
For medium to light soil conditions

2ZW: Serrated crumbler ø 320 mm & serrated crumbler ø 280 mm
For medium to heavy soil conditions

1F: Flat rod crumbler ø 380 mm
For medium soil conditions

2FZ: Flat rod crumbler ø 380 mm & serrated crumbler ø 320 mm
For medium soil conditions

1R: Round rod crumbler ø 380 mm
For medium to light soil conditions, in wet conditions, with stones

2RZ: Round rod crumbler ø 380 mm & serrated crumbler ø 320 mm
For medium to light soil conditions, for sandy and wet conditions.

2R: Round rod crumbler ø 380 mm & round rod crumbler ø 380 mm
(only available for VIBROSTAR XXL)
For medium to light soil conditions, for sandy, stony and wet conditions.

2RF: Round rod crumbler ø 380 mm & flat rod crumbler ø 380 mm
(only available for VIBROSTAR XXL)
For medium to light soil conditions

RP47: Ring packer roller ø 470 mm with spring stripper & following weeder tines 2 rows ø 10 mm
(only available for VIBROSTAR 5-rows)
Wedge-shaped reconsolidation on all soil types for a fine soil structure.

2ST: Following weeder tines 2 rows ø 10 mm
(only available for VIBROSTAR 5-rows)
Without rear roller – no reconsolidation of the soil
For very wet, sandy or stony soil conditions.

There are 4 support wheels mounted on the frame – as standard.

F1F: Front flat rod crumbler ø 380 mm

F1R: Front round rod crumbler ø 380 mm

Standard S-tine material 32×10 mm / 1.26×0.39″
For medium to light soil conditions – recommended in ploughed fields. This tine is available for VIBROSTAR 4-… and VIBROSTAR 5-… as standard and has a frame clearance of 400 mm / 15.75″. These are equipped with narrow shares.

The 3-point mounting is equipped with hardened bushings and the lower links are guided on both sides.

All models are folded hydraulically to a transport width of less than 3 m / 9.80 ft. Model 4-… as V-folding (picture), Model 5-… as H-folding. The VIBROSTAR XXL has a transport width of 3.5 m / 11.50 ft.

Material 32×10 mm / 1.26×0.39″ + 32×8 mm / 1.26×0.31″
For medium to heavy, stony soil conditions – can be used after ploughing.

Material 45×12 mm / 1.77×0.47″ – For all soil conditions, can be used after ploughing (for spring use, for incorporation of winter greening, etc.). This tine is mounted as standard on VIBROSTAR F-4-….

Material 45×12 mm / 1.77×0.47″ – For medium to light soil conditions (corn and beet cultivation), especially in stony soil conditions.

With duckfoot sweep 105 mm / 4.13″
Material 32×10 mm / 1.26×0.39″ + 32×10 mm / 1.26×0.39″

Duckfoot sweeps with 70 mm / 2.76″ or 105 mm / 4.13″ width can be mounted on heavy S-tines to nearly cut the full surface (Depending on soil type).

Mounted on the frame of a trailed VIBROSTAR XXL or 5-row VIBROSTAR, this VIBRO-BOARD is easy to operate from the tractor thanks to its hydraulic adjustment and ensures levelling before the first row of tines.

In order to level the ground before the first row of tines, optional levelling plates can be mounted, which can be adjusted at an angle.
(Standard at VIBROSTAR F-4-…)

Depending on the version, different rubber support wheels are available (standard on VIBROSTAR XXL).

For seeding of catch crops, a pneumatic seeding box (P-BOX-STI) can be installed or retrofitted at any time. The distribution plates are factory-fitted in front of the trailing rollers (but can also be positioned differently on request).