sports field weeder SPORTSTAR - the machine for sports fields care | EINBÖCK

Advantagessports field weederSPORTSTAR

Optionssports field weederSPORTSTAR

  • Tines Ø 6,5 mm, 380 mm long
  • Adjustable spring-mounted front levelling plate for large mole hills
  • Warning signs with holder and LED-lights
  • Pneumatic seeding box P-BOX

Video sports field weeder SPORTSTAR

Video
sports field weeder
SPORTSTAR

Incorporation of sand
The SPORTSTAR is used to incorporate sand in the same operation it weeds out felt, moss and clippings in a single operation.

Incorporation of sand
The SPORTSTAR is used to incorporate sand in the same operation it weeds out felt, moss and clippings in a single operation.

Pneumatic seeding box P-BOX
Two different pneumatic seeding boxes are available for easy distribution of cover crops or for re-seeding. The P-BOX-STI with electric drive (picture) or P-BOX-MD with mechanical drive (picture) of the seeding roller.

Pneumatic seeding box P-BOX
Two different pneumatic seeding boxes are available for easy distribution of cover crops or for re-seeding. The P-BOX-STI with electric drive (picture) or P-BOX-MD with mechanical drive (picture) of the seeding roller.

 

You can’t find the right photo?

We have a big range of photos in various perspectives and cultures. Contact us here!

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

No rollers
To combine grassland weeders and rollers in one machine does not provide the desired effect. Even distribution of the seeds over the entire working width, which is ensured by the centrally placed deflector plates, is the key factor for good emergence of the seeds. Furthermore, the operating speed of roller and grassland weeders do not match. In case soil gets stuck to the roller, seeds which have been distributed by the weeder get stuck on it and previously sown grass is collected from the ground again. In addition, a roller establishes contact between previously torn out weeds (such as the rough stalked meadow grass) and the ground. So they will not dry out but continue to grow. Especially for reseeding and grassland care, rolling is not necessary as the roller runs on the turf and has very limited contact to the soil. For new seeding rolling can be beneficial, but it should be done in a separate operation after weeds dried out and with the optimal working speed for rolling.

Levelling plate for excellent distribution and levelling of molehills

In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of molehills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment).

Levelling plate for excellent distribution and levelling of molehills

In front of the weeder sections a levelling plate can be mounted, which is overload-protected by a leaf spring. This levelling plate is height adjustable and ensures an excellent distribution and levelling of molehills. In addition, it distributes and levels manure and slurry. (Only up to 6 m working width and for 900 SR and 1200 SR, not in combination with hydraulic tine adjustment).

Simple mounting of a seeding box

The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.

Simple mounting of a seeding box

The P-BOX-STI or P-BOX-MD seeding boxes can be mounted on all tined weeders. In addition to various additional options for the seed drill, steps for filling are available.

Tines 380 mm long,  Ø 6,5 mm instead of standard tine
For heavily felted grassland and heavy soil conditions the tines with a diameter of 6,5 mm and a length of 380 mm are to be preferred.

Tines 380 mm long,  Ø 6,5 mm instead of standard tine
For heavily felted grassland and heavy soil conditions the tines with a diameter of 6,5 mm and a length of 380 mm are to be preferred.

Exact line spacing of the tines of 1,3 cm
The line spacing of exact 1,3 cm has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 114 tines on 1.5 m fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched.

Exact line spacing of the tines of 1,3 cm
The line spacing of exact 1,3 cm has a significant influence on the effect and quality of the operation. Tine fields with 6-rows with 114 tines on 1.5 m fields ensure an effective and efficient weed control. A bigger distance between the tines will leave unworked strips where weeds will continue to grow and the turf will not be dethatched.

Warning signs with LED-lights
For the grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Warning signs with LED-lights
For the grassland seeder warning signs are also available for the front and rear. (Symbol image - options vary depending on the design).

Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
 

Exact tine position and movement
The tines are fixed against rotation by sturdy plastic holders on the tine fields. This guarantees a tine that is aligned exactly in the working direction. The spring of the tine is mounted freely below the tine holder. This improves the vibration of the tine and guarantees the movement of the tine by the spring. A breaking of the tine is almost excluded since the movement of the tine is not limited.
 

Spring tines adjustable with a central handle

The aggressivity of the spring tines can be adjusted with a central handle per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

Spring tines adjustable with a central handle

The aggressivity of the spring tines can be adjusted with a central handle per section in five different positions. The positions can vary from dragging to “tip forward of the bend”.

Guaranteed equal tine aggressivity over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.

Guaranteed equal tine aggressivity over the entire working width

The tine tube is torsion-resistant and guarantees the same tine position and the same tine aggressivity over the entire frame length. This is particularly important in hard soil conditions.

Technical datasports field weederSPORTSTAR

  • Lower links with quick coupling pendular axle
  • Mounting category CAT I up to 5 m
  • Tines Ø 6,5 mm, 490 mm lang
  • Wearing part on the tine 100 mm long
  • Tine loss protection
  • Tube frame section providing equal working pressure over the full width
  • Line spacing 13 mm
  • Large bearing mounted rubber support wheels
  • The side sections swing in automatically
  • Parking support
  • Transport width 1 - 3 m

Type/working width cm

sectionsFeeler
wheels
Tines

from HP/kW

Weight
approx. kg

SPORTSTAR 150 rigid1 x 1,521148/6200

SPORTSTAR 200 rigid

1 x 2,1

2

162

10/7

230

SPORTSTAR 300 rigid

2 x 1,5

2

228

15/11

320

SPORTSTAR 450 hyd. folding

3 x 1,5

4

342

20/15

560

SPORTSTAR 500 hydr. retraction

1 x 2,1 / 2 x 1,5

4

390

30/22

630

SPORTSTAR 600 hydr. folding

4 x 1,5

4

456

40/29

740

 

Technical data and measurements are approximations and non-binding. We reserve the right to make changes in construction and model types.

Increased vibration-effect due to special tine holder

Increased vibration-effect due to special tine holder

Tines Ø 6,5 mm, 490 mm long
This universal tine with a diameter of 6,5 mm and a length of 490 mm is perfect for soft operation. A 6,5/380 mm tine is available for aggressive operation.

Tines Ø 6,5 mm, 490 mm long
This universal tine with a diameter of 6,5 mm and a length of 490 mm is perfect for soft operation. A 6,5/380 mm tine is available for aggressive operation.

Plastic support on U-frame
On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

Plastic support on U-frame
On the U-frame holding the weeder sections the supports guiding the section are covered with hard plastic. This prevents the U-frame from wearing.

Sports field weeder SPORTSTAR

  • Ideal for the grassland care and after-sowing
  • to aerate the grassland
  • perfect for weed control
  • promotes soil vitality and activity
  • optimal adaptation to surface
  • large variety of equipment

Sports field weeder SPORTSTAR

Sports field weeder
SPORTSTAR

  • Ideal for the grassland care and after-sowing
  • to aerate the grassland
  • perfect for weed control
  • promotes soil vitality and activity
  • optimal adaptation to surface
  • large variety of equipment

Conceptsports field weederSPORTSTAR

  1. Tines Ø 6.5 mm, 490 mm long (optionally 380 mm long)
  2. Line spacing 13 mm
  3. Prevention against loosing of tines
  4. Optionally available: P-BOX seeding unit
  5. Optionally available: front levelling plates

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

  1. Tines Ø 6.5 mm, 490 mm long (optionally 380 mm long)
  2. Line spacing 13 mm
  3. Prevention against loosing of tines
  4. Optionally available: P-BOX seeding unit
  5. Optionally available: front levelling plates

The photos and images show possible variants and some special versions. The factual machine configuration may differ from these illustrations.

Einböck offers with the SPORTSTAR the ideal machine for grassland care and after-sowing on sports fields and golf courses. Depending on the equipment the SPORTSTAR is the best machine for all different kinds of work on grassland.

ConceptConceptConcept
AdvantagesAdvantagesAdvantages
Technical dataTechnical dataTechnical data
OptionsOptionsOptions
MediaMediaMedia
TOP