Technique for a perfect seedbed
In order to ensure precise seed placement, growing conditions and emergence the seedbed combination EXTREM offers the following advantages:

• precise levelling of the soil surface
• exact depth guidance of the working tools
• uniform breaking up and crushing of the soil
• perfect mixing of fine soil and coarse crumbs
• optimal soil reconsolidation as well as compact seedbed

Preparing the ideal seedbed
Perfect seedbed preparation requests ideal technology. The seedbed combination EXTREM mixes fine soil with coarse crumbs, which prevents sludging and water evaporation. Particularly important in this respect is the correct crumbler, but also the front levelling plates. To ensure that the seed can be placed between the crumbled (top) and consolidated (lower) layer of soil a compact, smooth-running machine which precisely keeps the working depth is needed.

1: Air and heat | 2: Water | 3: Fine soil | 4: Coarse soil crumbs

Many different combination possibilities
In order to specify the best possible seedbed combination for the different soil types and conditions there is the possibility to combine many different working sections. In this way, the best machine for every field of application, as well as for every objective in soil tillage and seedbed preparation can be offered.

Simple, parallelogram-guided and fast adjustment of the working depth
The working depth of the sections is adjusted parallel to the ground via the breadboard. This ensures fast and simple, but still precise adjustment of the working tools. In addition, this ensures there is no need to readjust the 3-point-linkage of the tractor when the working depth is changed.

2-row crumblers for a crumbly and reconsolidated surface
Double crumblers with different diameters follow the tine sections to ensure a perfect seedbed. As they rotate at different speeds, the crumbling effect is perfect. Serrated crumblers improve this effect in comparison to flat steel crumblers. A single row of trailed weeder tines is available as an option on all crumblers.

Bracing to the rear for enough soil pressure
In order to be able to increase pressure to the trailled implements (crumblers), the bracing of the three-point linkage is designed directly to the coupling points of the crumblers.

Retraction, centre of gravity and traction point
The low traction point ensures good retraction of the working tools in the soil and smooth guidance of the machine. This guarantees optimum immersion and exact maintaining to the working depth even in heavy soil conditions.

Bearings and mounting of the following crumblers
The large-dimensioned, low-maintenance and completely sealed and protected ball bearings guarantee a long service life of the crumblers. The rubber buffers, which connect the crumblers to the mainframe ensure obstacles (e.g. stones) do not lift the working sections - this again ensures a quiet operation and increases service life.

Rubber suspensions for durability
The frame, as well as the crumblers, are very well protected against vibrations via rubber suspensions.
The machine works more dynamically and there is less force on the frame. The quiet mode of operation extends the service life considerably.

Unique combination of ''harrow-harrow''
In heavy, wet, sticky soil conditions without stones the combination harrow-harrow is most recommended.
Two harrow sections are mounted one behind the other, each of them in the front is fixed to the frame with chains.

 „100 % made by EINBÖCK in AUSTRIA“

• In-house development from the idea to serial production
  We have over 85 years experience in designing of agricultural machinery.
• From practitioner for practitioner 
  75 % of our sales and product management team are farmers, therefore we develop practice-oriented, user-friendly machines and adjustment options. Our top priority is to provide the right machines and suitable product specifications.
• Suppliers from the region and Central Europe
  Long-lasting relations to suppliers ensure constant quality of raw materials and components, as well as reliable supply.

• Manufacturing exclusively in Dorf an der Pram in Upper Austria
  Our high vertical range of manufacture guarantees the best quality and long working life. "100 % made by Einböck in Austria" ensures the highest quality in all areas of production.
• Practical testing of all machines on our own test fields
  Before prototypes are turned into serial production, they have to withstand extensive tests on fields and roads. This allows us to achieve absolute precision and reliability.
• After-sales service
  A decades-long supply of wear and spare parts ensures maximum service life of the machines as well as direct and close contact to customers.

Spring mounted levelling plate for perfect soil levelling
The spring mounted levelling plate of the seedbed combination (on variant 2E only the rigid variant is possible) is height-adjustable and can therefore be precisely adjusted to the field conditions. The possibility to adjust the position (''trailed'' or ''forward'') will crush the clods, level the surface and even out the tractor tracks. The tools are running very smoothly and the working depth remains exactly the same. The levelling plate is a useful tool especially for springtime seedbed preperation.

E-2ZW: Arable harrow tine section + serrated crumbler ø 320 mm / 12.60" and ø 280 mm / 11"
Arable harrow tine section, 5-rows, firmly mounted, height adjustable + small serrated crumblers for heavy soils and good crumbling
Tine: arable harrow tine 20x20 mm / 0.79x0.79" M18

Side-plate on both sides
In order to prevent soil being pushed sideways on the already worked area optionally side plates are available for both sides (for 2ZW/2FZ).

G-2ZW: mini seedbed tine section + serrated crumbler ø 320 mm / 12.60" and ø 280 mm / 11.02"
Mini seedbed tine section with spring tines, 5-rows, firmly mounted, height adjustable + little serrated crumblers for medium soils
Tine: mini seedbed tine straight with changeable sweep 32x10 mm / 1.26x0.39"

Spring mounted track loosener (1)
The spring mounted track loosener 32x12 mm / 1.26x0.47" (1) can be easily adjusted to the track width.

Safety track loosener 50x15 mm / 1.97x0.59" with duckfoot sweep 70 mm / 2.76" (2)
For stony soil conditions optional safety track loosener,  which are secured against overload by a pressure spring, are available. They are equipped with 70 mm duckfoot sweeps.

Both track loosener can be adjusted in height depending on the desired intensity.

2E: Double arable harrow tine section
Two arable harrow tine sections, 5-rows, in the front fixed with chains to the frame, rear guided, for heavy, sticky soil without stones up to working depth of 8 cm / 3.15"
Tine: arable harrow tine 20x20 mm / 0.79x0.79" M18

1-row trailed weeder tines
An optionally available single-row of trailed weeder tines ensure a good distribution of organic matter on the surface. It also increases as final tool the exactitude and precision of the machine.

E-2FZ: Arable harrow tine section + flat rod crumbler ø 380 mm / 14.96" + serrated crumbler ø 320 mm / 12.60"
Arable harrow tine section, 5-rows, firmly mounted, height adjustable + big flat rod- and serrated crumbler for medium soil, flat rod crumbler ensures high load capacity
Tine: Arable harrow tine 20x20 mm / 0.79x0.79" M18

Warning signs with LED-light
Warning signs with LED-light are availlable for front and rear (symbolic image).

G-2FZ: mini seedbed tine section + flat rod crumbler ø 380 mm / 14.96" + serrated crumbler ø 320 mm / 12.60"
Mini seedbed tine section with spring tines, 5-rows, firmly mounted, height adjustable + big flat rod- and serrated crumbler for light to sandy soils, flat rod crumbler ensures high load capacity
Tine: mini seedbed tine straight with changeable point 32x10 mm / 1.26x0.47"

KS-2FZ: straight tine section with special tines + flat rod crumbler ø 380 mm / 14.96" + serrated crumbler ø 320 mm / 12.60"
Tine section with straight spring tines, 4-rows, firmly mounted, height adjustable + big flat rod- and serrated crumbler, high frame clearance, deeper working, light harvest residues possible
Tine: special tine straight with changeable point 32x12 mm / 1.26x0.47"

Side wings adjustable via handles
The side wings can be easily adjusted from completely rigid to floating via handles. If the handles are removed, the wings can float downwards.

Safety hydraulic lock block
The safety hydraulic lock block fixes the hydraulic folding mechanism in working- or transport position.
This guarantees a rigid frame over the entire working width during operation in the field or safe road travel at all times.

Different assembling of the seedbad combination:

1. Section with mini seedbed tines with flat rod- & serrated crumbler
2. Section with straight tines with flat rod- & serrated crumbler
3. Section with arable harrow tines with flat rod- & serrated crumbler
4. Double section with arable harrow tines (without roller)

The photos and images show possible variants and some special versions.

The factual machine configuration may differ from these illustrations.